Question about Microsoft Wireless Laser Mouse 6000 v2.0

1 Answer

My rt button on my wireless laser mouse 6000 no longer functions

I have no use of any functions on my rt mouse button(cut/paste). I have reinstalled the driver a bizillion times and have even removed my mouse and keyboard software and reinstalled that and still nothing. I have tried removing it from device manager and still nada.....Can the button just go kaput??

Posted by on

  • 1 more comment 
  • allisonjc Dec 17, 2008

    the right button would not work at all, for anything, for days & days, and then today it has started working off and on, but not dependable, can I buy a new mouse without having to buy the whole package with the keyboard too?

  • mrbo64 Feb 28, 2009

    My mouse quit working suddenly. I replaced the batteries and uninstalled and reinstalled the drivers but I can even get the lights to come on. So after 3 months it looks like it just died for no reason

  • abarayr Jun 08, 2009

    Holy Cow!!!
    I was using two mice for the past few months...the 6000 to fluidly move about and an old PS/2 emachines to RT click only. Well my daughter decides to RT click the crappy MS 6000 one day and VOILA!!!! The ****** came back to life....No change has been made since Dec/Jan and the just started working again...does that extend my warranty??? So my tip is to keep the mouse around it just may come to life one day.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has achieved Level 3.

  • Master
  • 461 Answers

Sounds like a bad button. Does it still feel and click like the left? Try another mouse to rule out software.

Posted on Dec 10, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Compatible Mouse to replace one I have -- new

The wireless dongle plugged into the computer is on a specific frequency and you wont be able to peer it with a different mouse. However if it is a Bluetooth and not wireless, you can pair another Bluetooth mouse no problem.

Jun 15, 2015 | Microsoft X814986-008 Wireless Laser Mouse...

1 Answer

How do I increase the range on my wireless microsoft 6000 keyboard and microsoft wireless laser mouse 6000 v2.0.

I have a Microsoft Wireless Notebook Laser Mouse 6000 that also has a very short range. The only solution I've found so far is to plug the receiver into a USB extention cord and run the cord toward the mouse.

Mar 04, 2010 | Microsoft Wireless Laser Mouse 6000 v2.0

1 Answer

How do I sync a Microsoft Wireless Notebook Laser Mouse 6000?

You have to have the mouse and the usb receiver on the same channel. There should be a small button on both devices. First press the button on the mouse to see if starts to work. repeat at least 5 times to get through all the channels. If it doesn't work, then try pressing the buttons on the usb receiver and the mouse. I hope this helps.

Aug 05, 2009 | Microsoft Wireless Laser Mouse 6000 v2.0

1 Answer

Microsoft Wireless Laser Desktop 6000 Keyboard and Mouse

You can't just buy a mouse, have to get the receiver with it..unless you have a mouse where you lost the receiver then it would work..

Apr 08, 2009 | Microsoft Wireless Laser Desktop 6000...

1 Answer

Microsoft wireless laser keyboard 6000 v2.0 keyboard not working

You have to press the button on the receiver that is directly connected to the computer. While doing this, press the connect button both the mouse and the keyboard. I did this and now my keyboard is working, despite the battery indicator turning itself off a few seconds after I install it.

Hope this solves your problem.

Mar 20, 2009 | Microsoft Wireless Laser Mouse 6000 v2.0

3 Answers

Microsoft Wireless Laser Mouse and Keyboard Cut in and Out

Hi, I'm not positive but it sounds like your memory needs to be incr4eased. How much memory do you have installed now? This effeminately would cause the problem. Bud

Jan 02, 2009 | Microsoft Wireless Laser Mouse 6000 v2.0

1 Answer

Microsoft Wireless Laser Mouse 6000 (Model 1052):

Normal 0 Go to Control Panel and click on the Mouse icon. Then the mouse properties will appear showing the mouse buttons. Put the pointer on the left button and then go to the drop down and make sure the buttoon is set properly.
Hope this helps. Bud

Jan 02, 2009 | Microsoft Wireless Laser Mouse 6000 v2.0

Not finding what you are looking for?
Microsoft Wireless Laser Mouse 6000 v2.0  Logo

Related Topics:

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

2983 Answers

Piyal Perera
Piyal Perera

Level 3 Expert

528 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides