Question about Motherboards

1 Answer

SiS 760 Display Adapter not functioning. I also have another graphics card with Radeon display adapter that I am using for my primary monitor. When I tried to use my SiS 760 adapter recently as an extended desktop, it tells me the driver is for an outdated version of windows and so it is reverting back to my primary VGA (Radeon of course). It cant be thay its outdated because I have been using XP since I got it and it was fine back when I used it, I also tried updating the SiS760 driver software and it did nothing, so I just rolled it back to the old. What can I do?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 233 Answers

You need to disable one graphic card. To do this, just go to device manager and select the graphic adapter you want to disable and click on properties from the context menu, just select the driver tab and click on uninstall. You will need to restart your computer to finish this task.

Posted on Dec 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cd and hdd both run on startup... monitor says it is in standby and doesn't display?


  1. Ensure the display is configured to use the input connected (Analog for VGA, Digital for DVI etc. If you are using some sort of an adapter to connect the display, then that could also cause an issue. If possible, try a connection that has no adapter and/or try monitor on another system to ensure it is functional.
  2. Re-seat the video card. Often this can be an issue where just re-seating the card firmly will ensure you have proper connections. If using integrated display then there isn't a lot to do for that. Also ensure that if the system has an expansion graphics adapter, you are not connected to an on-board port as these are normally disabled by an expansion adapter. If you do have both video expansion and on board video, also try removing the expansion adapter an use just the on-board one.

Jul 11, 2011 | ASUS P5NSLI (0610839134670) Motherboard

2 Answers

I have a compaq presario pc. Motherboard is Asus P5LP-LE : Lithium UL8E. I have 3 Gig of RAM installed, a 400w PSU. I have just purchased a new graphics card - Radeon HD5570. My MoBo has 1 PCI-E x16 and 3...


Hi,

I think you have not connected power connector to your Radeon HD5570 .
This graphics card have 6pin power connector .
You need a 6pin power connector cable that comes with the graphics card box.

1.First connect your 6pin power connector to Graphics card.
2. Then connect other part of the cable to PSU.

Hope it will work for you.

Thanks for using FixYa.

May 14, 2011 | Motherboards

1 Answer

Update for SiS 2615 Display Adapter to load windows XP pro


The PC Chips MB PCCHIPS SiS746FX M848A V5.0 462 motherboard does not have onboard video, correct? So if you can obtain the make and model of your video card, you can then find the Windows XP drivers online for download. Then you would be able to provide said drivers when the "system asks you to update SiS 2615 Display Adapter driver"

*Another quick fix would be to use a different VGA card, if you have one available?




*Now, I have never been prompted to update display driver before or during a windows installation or update. So that step I would require a little more detail on. I have only been prompted for mass storage drivers (as seen in screenshot).
update-sis-2615-display-adapter-load-hplvg2om5ybidfrvvqtji5z5-3-0.png

Apr 19, 2010 | PC Chips MB PCCHIPS SiS746FX M848A V5.0...

2 Answers

No display assus motherboard PSN73-AM ASUS MOTHERBOARD


When the PC starts up, do you get a BIOS display at all? Try fitting a graphics card into the board instead of using the built in port, if that works check the BIOS settings to see if the built in adapter has been disabled,

Mar 26, 2010 | ASUS P5N73-AM Motherboard

1 Answer

Asrock p4i45gv not detecting hd 3650 agp card


Take the new card out and reconnect the monitor to the on-board VGA. Boot up press F2 and enter the bios. Look for resource configuration and set the Primary Graphics Adapter as AGP.
Save and switch off. Disconnect the PC from the mains, fit the new card and attach the monitor cable to the new card.
Make sure to attch a power connecter to the card if it needs it.
Reconnect the PC to the mains switch on and hopefully away you go.

Best of luck.

Jan 28, 2010 | Asrock P4I45GV R5 Motherboard

1 Answer

I bought Foxconn 755A01-6EKRS Motherboard for my HP pc replacement. i install my AGP VsionTek x1300 graphic card and turn it on and nothing show up on screen...then i put the graphic card back to my old HP...


Your new Foxconn motherboard Primary Graphics Adapter settings in set to onboard vga that is why there is no display in your monitor. Do not install yet your agp video card. Use first the onboard vga of the motherboard.
Power up your computer and go to the BIOS settings. Locate in bios about the Primary Graphics Adapter settings and then select AGP. Save changes and the exit. Turn off your computer and now install the agp video card.

Dec 16, 2009 | Foxconn 755A01-6EKRS Motherboard

2 Answers

My ASUS P5SD2-VM Is Having A No Display Problem


If you are using the motherboards built in VGA graphic display, check your bios settings. Open your manual to page 2-22. Read the page.
Make sure you have the bios set to, Primary Graphics Adapter [PCI-E] set to, [IntVGA].
Set the internal VGA to, [Enable]. You will also need to set an amount of your system memory for the VGA to use. It is recommended if you are using Windows Vista that you increase your 1GB of system memory to, 2GB. Or instead you can buy a decent PCI-E video card that will use its own memory instead of your system memory. If you do this you'll need to change the bios settings to, Primary Graphics Adapter [PCI-E].
Also change, Share Memory Size to [Disabled].
If you need the manual for the Asus P5SD2-VM. Click on the link below;
http://support.asus.com/download/download.aspx?modelname=P5SD2-VM&SLanguage=en-us

Click the dropdown menu & click on your operating system. Than click Search. Asus list all drivers, manuals, FAQ's ect.
To view the manual you'll need Adobe Reader. You can download Adobe for free at this link;
http://www.adobe.com/products/reader/

Again, if you do not have any display & your using the built in VGA graphics card try resetting the bios. Doing this will reset the bios back to normal default settings. The bios will auto use the built in VGA. To clear the bios see page 1-22.

Good luck!
Mike


Apr 26, 2009 | ASUS COMPUTER INTL P5SD2-VM MBD MATX LGA...

1 Answer

Motherboard problem


Hi,


Hiw can u say's its display problem,Have u checked the signals on k/b ?
If not check the Num lock status in keyboard. Press the Num lock key ,if the light glows and stands for sometime display is ok,but ur vga adapter is the problem.

Otherwise problem maybe with m/b or psu.

Pl check it.

Regards.

Was this soultion useful?give the apppriciation by rating it.

Apr 04, 2008 | ASUS P5K-V - Motherboard - ATX - iG33 -...

2 Answers

Graphic Card


Page 71 of this manual will show you how.

http://dlsvr03.asus.com/pub/ASUS/mb/socket775/P5VD2-MX/e2505_p5vd2-mx_update.pdf

Jan 03, 2008 | ASUS P5VD2-MX SE Motherboard

Not finding what you are looking for?
Motherboards Logo

Related Topics:

588 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Mark Taylor
Mark Taylor

Level 3 Expert

728 Answers

Are you a Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...