Question about Samsung SPP-2020 Thermal Photo Printer

3 Answers

Samsung kicked out hp 3in 1 printer already installed

I disconnected my hp printer and used the cable and connected it to my samsung photo printer because the cables that come with the samsung did,nt match the usb portals on my computer any ways everything worked fine i printed off my photo,s the unplugged the cable from the samsung and connected it back to the hp printer it seems that the samsung kicked out the hp driver because i wanted to print a document and it would,nt print so i had to uninstall my hp printer and reinstall it back can any one help me does this mean my samsung needs it,s own cable and portal?

Posted by on

×

Ad

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 202 Answers

Don't have your HP designated as the default printer (if possible)when you hook up the Samsung. When the Samsung is hooked up it sees the HP is the default printer. Well it can't have that, they discard the HP drivers. What does Samsung care about HP drivers theres only one printer port setup and thats the USB port you have them sharing. So yes you need to get a second cable. Tim

Posted on Jan 29, 2007

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Filmmaker:

    Uploaded 5 video answers.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 68 Answers

Do you like technical service? Lets join samsung printer support chat at 18!7777_88_969 from samsung printer technical support team 247.
samsung kicked out hp 3in 1 printer already instal - 1-877778-****-samsung-printer-tech-support-phone-number--jkyrmota2pdsmwgougvljebf-5-0.jpg

Posted on May 23, 2017

Ad
  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 16 Answers

Dial >for (1>877>778>89.69) Samsung Printer Customer Service
We are an experienced and certified third party printer tech support service provider working for Samsung brand printer to solve any issues affecting its performance. We are available all the time on one phone call @ Samsung Printer Customer Service +1-877-778-89.69 and our service is available round-the clock. We work most advance tools and techniques and provide best solution and lowest charges. http://printertechnicalhelp.com/samsung-printer-technicalhelp.html

Posted on Jan 12, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to troubleshoot HP Printer not found during network driver setup issue in Windows Operating system?


Download the full feature software from the HP website or on the software disc and setup your printer for wired or wireless network connection.
There might be one of the following errors if the installer does not detect your printer after setting the connection type.
1.Printer not found
2.Devices not found
3.Unable to find the printer
During the Hp printer network setup, there may be some troubleshooting issues,

Step 1: Reset or restart your computer, HP Officejet printer and the router
1.Disconnect the power cord outlet from the router.



5465_install_1a-ur23imwvkexuk45mistkg3hp-5-0.gif 2.Close all the tabs running on your computer and shut down your computer.
3.Then turn off the HP Officejet 4650 printer.
4.After few minutes reconnect the power cord outlet to the printer and wait till the connected status light blinks to normal.
5.Then turn on the printer and computer.
6.Again install the HP driver and software.

Step 2: Check the status between the printer and the network connection.
Before the setup confirm that your printer is ready.
1.Wireless Network: On the printer, open the wireless network connection settings menu and check whether the wireless signal is turned on.
2.Wired Network: Check that cable is connected to the printer Ethernet port.
Note: The green light should be in steady status and the orange link should blink when the cable is connected and make sure that your HP printer is not connected to a guest or host network.

1.Set the band to 2.4GHz if it is dual band router else the printer cannot connect to the network.
2.Check the network name and status of the connection in the notification bar.
3.If it is a different network then reconnect your network to complete the setup.
4.Move the computer and HP Officejet 4650 printer closer to the router if the signal is weak.
5.Slide the Airplane mode to off if it is on.
6.And again try installing the software and driver.

Step 3: Run the HP Print and Scan Doctor:
1.HP provides a free tool called HP Print and Scan Doctor to resolve the scanning and printing issues.
2.Download the HP print and scan doctor software to resolve all the troubleshooting issues.
3.After the installation on the Welcome screen click start.
4.A new menu box appears on the screen with the printer list. If your printer is not listed then turn on the printer again and connect it.


hpscanprinter-ur23imwvkexuk45mistkg3hp-5-2.png 5.Click the option my product is not listed and then select retry.
6.After that, your printers display and select it.

Step 4: Temporarily disable firewall software.
If the firewall software is installed on the computer that will help you to block the threats that found on your computer.
Use the print and scan doctor to identify and temporarily disable firewall software on your computer.
1.Click network on the print and scan doctor window.
2.A drop down box appears in that select the option troubleshooting firewalls.
3.Click the firewall software to disable it.
4.And install the HP driver and software.
If the HP driver is successfully installed then consult the firewall software support to change the settings as security level, trusted zones. After changing the settings re-enable the firewall software.
If the HP driver is not installed then there is no issue in firewall software and re-enable it.


Step 5: Uninstall and reinstall the HP drivers and software.
1.Disconnect the cable if your HP Officejet 4650 printer is connected to the USB cable.
2.Click programs and features in the search windows.
3.A list of installed programs will be displayed click your printer name and uninstall it.
4.Then follow the on-screen instruction to complete the process and restart your computer and reinstall the software from the official site.

If you still have doubts regarding this setup you can call us @1-800-836-3987 or visit us 123 hp setup oj 4650

Jul 06, 2017 | HP Office Equipment & Supplies

Tip

Drivers, Software, lost C.D....come this way!


If you have lost you cd or don't know how to install your printer then all you need to do is download the drivers and software from the manufactures website that suits your operating system and printer.

Drivers and software download areas for brands listed below, just click to gain access and then locate driver for your needs.

Brother Epson Sharp Canon Lexmark OKI Dell HP Kyocera Samsung Konica/Minolta Xerox Panasonic

PLEASE NOTE

When installing drivers / software it is generally a good practice to -

  • Delete old/previous installs
  • Leave printers USB cable disconnected from computer until newly installed software requests it to be connected.
Happy Printing

Soulvisitor.

on Apr 12, 2009 | Epson Stylus Photo R1800 InkJet Printer

1 Answer

HELP ! My HP C309a photosmart 3in 1 printer


Hello and Welcome!

The error
Oxc19a0040 is mostly occurred in HP printers
To solve the error code
Oxc19a0040,Follow the given steps


  • Reset the printer without turning off the printer, disconnect the USB cable from the rear of the printer
  • Remove the cartridges from the printer
  • Wait for the 'Insert Cartridges' message to display on the control panel
  • Disconnect the power from the back of the printer
  • Now wait 60 seconds
  • Now reconnect the power If the product does not automatically turn on, press the Power button
  • Reinsert the cartridges, and then close any open doors on the printer.
  • If you receive a prompt to print a calibration page.Print it
  • Reconnect the USB cable to the port of the printer & then try printing again
Error will automatically remove.

Thank you for using FixYa!

Jun 08, 2012 | HP Photosmart Premium C309A All-In-One...

1 Answer

I have just gone over from windows xp to windows 7 and cannot get my hp printer to print text or photos


Go to the HP website and find your printer model. Download the driver for Windows7 if you have not done that already. Are you running Win7 32 or 64 bit? Make sure you download the correct driver from HP.

If this printer is directly connected to the machine you are using it on (with a cable), try to uninstall (remove) the printer and re-add it after installing the new driver.

Aug 18, 2010 | HP Photosmart 3110 All-In-One InkJet...

1 Answer

I need to reset a HPOfficejet Pro L7780


Disconnect the printer from other computer that you have already connected. Now connect the cable to the computer you want to connect. Make sure that do not connect the cvable while installation, it will [prompts to connect it.

Mar 14, 2010 | HP Office Equipment & Supplies

1 Answer

When I install the D7260 printer using the CD-Rom supplied it works fine. Then after a few days only the top two or three lines of the first page are printed and, after a long pause, the sheet comes out....


Many issues are caused when the HP Photosmart is connected to computer using a USB cable before the HP Photosmart software is installed on the computer. IF you connected the HP Photo smart to your computer before the software installation screen prompts you to do so, you must follow these steps.

Troubleshooting common setup issues :
1) Discoonect the USB cable from the computer.
2) Uninstall the software (if you have already installed it.)
3) Restart you computer.
4) Turn off the HP Photosmartm wait one minute then turn it on.
5) Reinstall the HP Photosmart software.

If your installation is incomplete, or if you connected the USB cable to the computer before prompted by the software installation screen, you might need to uninstall and reinstall the software. Do not simply delete the Hp Photosmart application files from your computer. Make sure to remove them properly using the uninstall utility provided when you installed the software that came with the HP Photosmart.

To uninstall from a Window computer and then reinstall
1) On the Windows taskbar, click Start, Settings, Control Panel (or just Control Panel).
2) Double-click Add/Remove Programs (or click Uninstall a program).
3) Select HP Photosmart Driver Software, and then click Change/ Remove.
Follow the onscreen instructions.
4) Disconnect the HP Photosmart from your computer.
5) Restart your computer.
Note : It is important to that you disconnect the HP Photosmart before restaring your computer. Do not connect the HP Photosmart to your computer untill after you have reinstalled the software.
6) Insert the HP Photosmart CD-ROM into your computer's CD-ROM drive and then start the Setup program,
7) Follow the onscreen instructions and the instructions provided in the Setup Guide that came with the HP Photosmart.







Nov 09, 2009 | HP Photosmart D7260 Printer

1 Answer

Installation software for printer


Choose your operating system:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=391186&lc=en&cc=us&dlc=en&lang=en&cc=us

Disconnect the printer before installing the software and only connect it when asked.

May 12, 2009 | Office Equipment & Supplies

1 Answer

Error 0x0000002when trying to install hp photosmartC5100[printer C5180] all in one printer to a toshiba laptop with vista


Seems like its a common problem.
Are you using a usb cable direct connection or a serial to usb

based in microsoft's forum
http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=2298899&SiteID=17

Try this:

1. Make sure the only printer connected is your hp printer that you are having problems

2. From your control panel go to system then go to device manager

3. Under universal serial bus controllers, look for usb printer or any usb printing device you see there and uninstall it.

4. Disconnect your usb cable from the printer and your computer

5. Uninstall the driver from the add/remove programs or hp's driver software uninstaller

6. Restart your computer

7. Download the latest driver from hp's website or use the cd installer

8. Plug in the usb cable from both ends and restart again the computer


Jun 13, 2008 | HP Office Equipment & Supplies

1 Answer

Printer will not work..


Did you by any chance installed the driver software while the printer was already powered-on and connected? If this is the case - disconnect or power-off your printer. Uninstall the software from your Control Panel - reboot. Leave the printer off - reinstall the software - the HP Program will ask you during installation to switch-on the printer - upon wich the driver will be installed automatically - do not siwtch on the printer before the installation progam (HP Diver CD) notify you to do it - and VOILA.

Hope this help

Apr 19, 2008 | HP DeskJet 812c InkJet Printer

2 Answers

Scanning


Many issues are caused when the HP All-in-One is connected to the computer using a USB cable before the HP All-in-One software is installed on the computer. If you connected the HP All-in-One to your computer before the software installation screen prompts you to do so, you must follow these steps: Troubleshooting common setup issues 1. Disconnect the USB cable from the computer. 2. Uninstall the software (if you have already installed it). 3. Restart your computer. 4. Turn off the HP All-in-One, wait one minute, then restart it. 5. Reinstall the HP All-in-One software. CAUTION: Do not connect the USB cable to the computer until prompted by the software installation screen.

Aug 19, 2007 | HP Officejet 6310 All-In-One InkJet...

Not finding what you are looking for?
Samsung SPP-2020 Thermal Photo Printer Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Office Equipment & Supplies Experts

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2022 Answers

Victorman
Victorman

Level 3 Expert

840 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

Are you a Samsung Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...