Question about Euro-Pro F1066 Deep Fryer

1 Answer

Don't know how to work euro-pro deep fryer - Euro-Pro F1066 Deep Fryer

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Place the oil tub in the housing, and put the control unit on the back of the housing with the heating element inside the oil tub. Put room temperature (not chilled) shortening and/or lard in the oil tub. (Solid fats make better french fries, IMO.) Put the unit where you aim to cook, on a clear expanse of counter, where no one will knock it off. You are about to make boiling oil, and the potential for injury is truly medieval. Attach the magnetic power cord to the back of the control unit, and position the unit with the front of the control unit, which is at the back of the oil tub, facing you. Plug it into the wall. The magnetic cord attachment is easily knocked off, which is a safety feature, so don't knock it. If it comes off, just put it back on and restart the unit. Push button at lower right of control unit that looks like a 0 and 1 superimposed on each other. This is the power button. Put the lid on the unit with the two slots on top of the lid facing towards the front of the unit where you are. These two slots are where the basket will sit, but you haven't used the basket yet. Adjust the temperture using the + and- buttons. 375 is good for french fries. Now wait until the red light goes out and the green light (I believe) stays on. Now it's up to temperature and you can cook. Put frozen or washed and patted-dry (with a towel) french fried potatoes or battered fish or whatever you want to cook in the wire basket. Quickly lower the basket into the oil and replace the lid: back edge goes down first, then front of lid last. Set the unit's timer if desired, or just use your own timer. It will beep at you when your time is up. When you're done, you can wash the basket by hand or in the dish washer and wipe the unit off with a warm soapy dish cloth. Wait until the oil is cool to room temp before attempting to put the unit in a cupboard. Very hazardous with large potential for mess otherwise!

Posted on Jan 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need manual for euro pro deep fryer model# f1045


I found a PDF of the F1045 fryer manual here: http://www.sharkclean.com/manual/F1045_REV_1107.pdf . While Shark doesn't sell these, the manual is still in their archive.

I hope this helps.

Cindy Wells

Jul 19, 2014 | Euro-Pro Stainless Steel Deep Fryer, Model...

1 Answer

No intruction manual


The link for the Euro-Pro F1063 Deep Fryer is below.
http://kitchen.manualsonline.com/manuals/mfg/europro/f1063.html
Just click "Get this manual" and you should have no problem.

Apr 17, 2011 | Euro-Pro F1063 Deep Fryer

1 Answer

I burned up the heating element in my euro-pro fryer and am looking for parts . I didn't put enough oil in the fryer and turned it on before i finished putting oil in. It started smoking and the element(?)...


You can order parts by phone at Euro-Pro. Just click the link, eh? No parts are available online. This will take a bit of work to change the element. Make sure the seals are good.

Apr 21, 2010 | Euro-Pro F1066 Deep Fryer

1 Answer

I want to fabricate my own deep fryer. I know how to work on the body, except for the electrical parts


For the electrical parts you will need, a Temperature sensor, a Temperature Control Module, The Elements to be Controlled. probably one or two 1500Watt elements. Heat proof wire (Teflon coated.) Heat proof Connector Blocks.

Jan 29, 2010 | Euro-Pro F1066 Deep Fryer

1 Answer

I purchased this deep fryer. REALLY like it,


use a different oil that worked the best for me

Jan 14, 2010 | Euro-Pro F1061 Deep Fryer

1 Answer

Where can I get a replacement transformer for my Euro-Pro Deep Fat Fryer


there are no inside parts made for this unit , you might call home shopping channel there might be a service center somewhere . if anyone would know its them

Feb 02, 2009 | Euro-Pro F1066 Deep Fryer

1 Answer

Euro-pro deep fryer don't know how to work it


Welcome to FixYa.com! I'm the expert that chose your issue to fix. Let's get you some information! You can download a manual for your fryer at the following link:

http://www.euro-pro.com/europro/manuals/F1066.pdf

Thanks for using FixYa.com

P.S. - If you find that the solution/answer I provided led you to, or resulted in a fix, please close the ticket with a FixYa! rating. I would be very grateful for your show of appreciation.
If it hasn’t, please do not assign a rating just yet. Please post back as to what steps you took, results, etc, and I will try to assist you further as best I can. I am here at your service.

Dec 02, 2008 | Euro-Pro F1066 Deep Fryer

1 Answer

Immersion Element (


This should be the info you need; http://www.euro-pro.com/europro/faqdetail.aspx?modelno=f1063 on the left is the link for the user manual. Hope this helps - please ask again if you are unsure :)

Apr 12, 2007 | Euro-Pro F1063 Deep Fryer

Not finding what you are looking for?
Euro-Pro F1066 Deep Fryer Logo

459 people viewed this question

Ask a Question

Usually answered in minutes!

Top Euro-Pro Deep Fryers Experts

BOB  BROWER
BOB BROWER

Level 3 Expert

267 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Cindy Wells

Level 3 Expert

4758 Answers

Are you an Euro-Pro Deep Fryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...