Question about Kenmore 3.2 cu. ft. Plus Top Load Washer

1 Answer

Kenmore 90 Series trouble with spin cycle

My 90 series front loader washer (model 110-22922-100) is not spinning properly. It will only spin with light loads. When it doesn't spin at all you can hear the motor, but no action. It is hit or miss, when it does spin it is at a slow speed. All of the other cycles are fine. Any ideas? Thanks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 640 Answers

Belt needs changing

Posted on Dec 27, 2008

2 Suggested Answers

  • 1937 Answers

SOURCE: how to replace lid switch kenmore 110 22922 washing machine

First, see the Sears parts site for your washer:
http://www.searspartsdirect.com/partsdirect/index.action

Enter your model number (###.######) and you'll see a list of major sub-components with diagrams and parts.

Look at the section on the cabinet.

Then see the following for how to release the console and pull the cabinet.

http://www.american-appliance.com/catalog/newsdesk_info.php?newsPath=16&newsdesk_id=131&osCsid=9b19162f839199d33f88dac696ac636c

Posted on May 07, 2010

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a kenmore 90 series washer that won't spin. It makes a grinding type noise at that point in the cycle. I followed the trouble shooting guide and checked the motor/gearbox coupler. The coupler looks...


If the coupling is OK then the problem is most likely to be further up the drive-line, which means the gearbox has probably failed. .........Nomess

May 16, 2010 | Washing Machines

1 Answer

Kenmore 90 Series Washer


CHANGE THE LID SWITCH

Apr 18, 2009 | Washing Machines

1 Answer

Kenmore 90 series noise after spin


You need to replace the drive block and basket drive. You can download a tutorial to get you started at www.shop.washermd.com. The gearcase replacement tutorial will put you in the right direction. Dave

Mar 01, 2009 | Kenmore 3.2 cu. ft. Plus Top Load Washer

2 Answers

Kenmore 90 Series Washer


You have a broken lid switch. Its # ll in the diagram. Part # is 3949238. Let me know if you need info on how to replace it, Dave www.washermd.com
02e81a1.png

Dec 17, 2008 | Kenmore 23822 Top Load Washer

1 Answer

Kenmore series 80 washer makes loud knocking noise during spin cy


Unless your front loader is set firmly on concrete and leveled to perfection, the force of a heavy wash load spinning in excess of 1000rpm will create a bit of vibration and noise.A firm footing is your best defense against to much movement.
Also due to the earlier movements during the spin cycle, the shocks that are used to dampen the spin cycle might have been broken or damaged.
If the problem persists inspite of proper levelling, please do check for the shocks or might have them replaced them for good.

Dec 14, 2008 | Kenmore 24032\24036 Top Load Washer

1 Answer

Intermittent spin cycle on Kenmore 90 Series washer


You may try the speed selection switch.....Ive had problems with these.

Jan 23, 2008 | Washing Machines

2 Answers

Kenmore 90 Series Washer has slow spin cycle


Washing machine won't spin, seems locked up, when i turn the spin cycle on you can hear the machine trying to spin but it won't budge....... any suggestions???

Dec 19, 2007 | Washing Machines

1 Answer

Kenmore 90 series noise after spin


Yes the brakes are grabbing too hard....I will sometimes lubricate them....Or replace the basket drive assy. You do know how to take the cabinet off i take it??

Oct 02, 2007 | Washing Machines

Not finding what you are looking for?
Kenmore 3.2 cu. ft. Plus Top Load Washer Logo

697 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Archaeology
Archaeology

Level 3 Expert

662 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...