Question about JVC AV-32D305 32" TV

1 Answer

TV keeps turning itself on and off, onto standby

My television keeps switching itself off, but not fully, so that it is on standby. Sometimes it will switch itself back on again too. The red standby light flickers, its as if someone with a remote control is pressing buttons! The problem started when I moved the TV into a different room, it was not damaged in any way through moving. The television is approx 5 years old and tre problem has got progressively worse, in that every time it is switched on now, it more or less immediatley switches itself back off again. My JVC {AV24WT5EK} TV has suddenly started to switch itself onto standby a few minutes after switching on. Pressing the standby button does not switch it on again. It works ( for a few minutes) when I switch off, then on and then the standby button. The TV originally did not require the standby button to be pressed when it was switched on. The Sleep timer is OFF.

Posted by on

  • 2 more comments 
  • Anonymous Jan 04, 2009

    tv was working fine, then all of a sudden the screen goes black. the tv is turning itself on then off again within seconds. iv only had this tv 2 days. its a 42ich lcd hisense. really annoying when you pay that kind of money!

  • jannineearns Jan 31, 2009

    I have the problem

  • lbsaf Feb 13, 2009

    My JVC TV has just started to switch itself on to standby within about 3-5 seconds of switching it on. To switch it on again you have to turn the power off completely and startover again. A day before this it randomly switched off twice but was able to be switched on again, and the screen went a bit funny with a black line down each side.

  • mark ritchie Apr 08, 2009

    almost exactly the same problem with my jvc tv.keeps switching itself on and off

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I managed to find a local repair man who fixed the problem. He put in a new transformer.

Posted on Dec 05, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Elonex tv keeps going on standby, take 10-15 times for it to work


It sounds that there is some short circuit with its SCL-SDA rail, at its main digital circuit board. It will be best to contact any service technician, as troubleshooting the main board is a skilled work.

Nov 25, 2013 | Televison & Video

1 Answer

Elonex tv keeps going onto standby, take about 10-15 goes to work.


Sounds like you may have some capacitors going bad. If it is a high end TV it may pay you to take it to a repair shop.

Nov 25, 2013 | Computers & Internet

1 Answer

Tv wont switch on with remote or the button on top of the tv. The standby button is on (red). sometimes it comes on by itself and switches off by itself (onto standby mode) not sure of the model as its a...


It could be one of a couple of problems really, the first one may be that your analogue signal is being switched over to digital which is happening across the UK at the moment, buying a digital receiver would resolve this straight away. It could be a problem with the ariel connection to the TV, check that its all pushed in properly at the back of the TV. Failing this then its a problem with the TV set, the fact that the set produces a picture on other sources (dvd) implies that if it is a fault with the TV its with the ariel connection.

Mar 31, 2011 | Sanyo Televison & Video

1 Answer

When i switch my tv on it turn's itself to standby, i can switch it back on again but it just keep's switching itself to stanby after a couple of minutes.


You need a live input source to the port that the TV is set to, or turn on the tv and switch input to a live input source, anything else and the tv shifts to standby.

Oct 13, 2010 | Televison & Video

1 Answer

My tv keeps switching itself back onto standby, why is this ?


your tv is in shut down mode ,the voltage is to high ,it protects the tv

Oct 18, 2008 | JVC Televison & Video

2 Answers

Sony KV-36FS76U keeps turning itself off


Due to playstation or dvd nothing will happen. 5 red flashes means jungle ic failure shows this display. Technical person only sorted out the above problem.

May 07, 2007 | Sony FD Trinitron WEGA KV-27FS100 27" TV

1 Answer

TV cut out and stay on standby


hold the power switch in from off for 10 seconds, worked for me.

Jan 06, 2007 | Sony FD Trinitron KV-28FQ75 28" TV

1 Answer

TV keeps turning itself on and off, onto standby


Right i had this same problem for ages! i cannot explain why but when i uplugged my DVD player (which was flashing its light at the same time as the tv for some reason) the TV has worked fine.

Aug 24, 2006 | Philips TV Tuner Video Capture PCI Card -...

Not finding what you are looking for?
JVC AV-32D305 32" TV Logo

2,624 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72248 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

easy alberta
easy alberta

Level 2 Expert

132 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...