Question about HP DeskJet 3745 Printer

1 Answer

My printer will not come on at all - HP DeskJet 3745 Printer

Posted by on

  • 1 more comment 
  • bag678 Dec 04, 2008

    It was the power cord. Since the replacement cord is expensive it was still cheaper to get another printer.

  • JW50 May 11, 2010

    here's a link for slow response or no response ...

    http://h10025.www1.hp.com/ewfrf/wc/docum...



    sometimes plugging the printer directly into the wall will help, too, if it's plugged in to a power strip and not working.

  • jockeyjoc May 11, 2010

    Have you check the Power Supply? Also unplug it from the machine and from the Outlet as well and wait 30 to 60 seconds and plug it in and turn the Power switch on to see if maybe the circuit board as an error in it. Also what was the last thing you were doing when it quit?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 734 Answers

Hi,Try the following sites to short out your problem…..

http://uw713doc.sco.com/en/PR_admin/prntT.NoPrint.html

http://files.support.epson.com/htmldocs/pho22_/pho22_rf/trble_5.htm

Thanks


Posted on Dec 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1~877~778~8969 Brother Printer Technical Support Number?


Brother phone support cost money, use the email option.

May 20, 2016 | Brother Printers & Copiers

Tip

Setting up a Shared Network Printer


Any printer that is connected to a computer and is connected on a LAN can be configured so all other computers on the same network can print to this printer. This means the computer with the printer attached to it MUST be booted up at all times when other computers want to access the printer.
You need to install the printer driver on the computer and configure it as a Shared printer.
The other computers on the network need to add this printer to their computer.
Follow these steps to set-up a shared network printer :-
1. Connect the printer to the computer and install the printer driver.
2. Open Printers and Faxes - right click on this printer and click Sharing - click Sharing tab and click Share this printer, then if you wish you can change the Share name, then click OK
3. Right click on the printer – click Properties - click Print Test Page to confirm printer installation.
Follow these steps to configure the computers on your network :-
1. Open Printers and Faxes – click Add a printer – Next – select A network printer, or a printer attached to another computer - Next.
2. Select Browser for a printer – Next
3. Click on and expand the Microsoft Windows Network down to the computer with the printer – Next
4. Select Yes for - Use this printer as the default printer – Next – Finish
5. Right click on the printer – click Properties - click Print Test Page to confirm printer installation.

on Dec 19, 2009 | Printers & Copiers

4 Answers

How to install network printer


on a server ?

Make sure the networked printer is turned on and connect to the Internet using an Ethernet cable.


Click "Start" on the server computer and click the "Printers and Faxes" icon.



Click "Add a Printer" on the left side of the window.


Choose "A Network Printer" from the pop-up window, and click "Next."


Type in the exact location or Internet Protocol (IP) address of the networked printer, and then click "Next."


Select the printer manufacturer and model from the list of driver options. Click "Finish" to complete the printer installation process.

or a home network

Navigate to the Control Panel and click on "Printers and Other Hardware."


Click the printer you want to share in the Printers and Faxes folder. Click on "Share this Printer" in the Tasks Pane or right-click on the printer and select "Properties.


Open the Sharing tab and click on "Share this Printer." Enter the name of the shared printer and click "OK."


Use the shared printer with any computer on the network by navigating to Control Panel > Printer and Other Hardware.


Click "Add a Printer" and browse for the network printer you just shared.

Connect the Printer Directly to the Network.


Plug the printer directly into the network hub or router.

Follow the instructions for setting up the printer for networking provided by the printer manufacturer.


Use the shared printer with any computer on the network by navigating to Control Panel > Printer and Other Hardware.

Click "Add a Printer" and browse for the network printer.


hope this helps

Sep 27, 2012 | Canon 2 Ir3300 Ir3300i B/w Copier/ Network...

3 Answers

How do I set the printing preference for my smart label printer 240--I have windows xp


Go to the Start, Settings, Printers. Select your printer, the set it as your default printer.

You can also get to the printer by way of the Control Panel.

Dec 30, 2009 | Seiko Smart Label 240 Thermal Printer

6 Answers

General error Delete all print jobs and turn the printer off. Remove any foreign objects from inside the printer. After a few minutes%2C turn the printer back on.


general error Delete all print jobs and turn the printer off. Remove any foreign objects from inside the printer. After a few minutes%2C turn the printer back on.

Nov 24, 2009 | Epson Stylus Photo R300 InkJet Printer

Not finding what you are looking for?
HP DeskJet 3745 Printer Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96417 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...