Question about Office Equipment & Supplies

1 Answer

Getting into service mode on a CLC5000

All the info I can find says to enter *-28-* to enter the service mode on a Canon CLC 5000. So... where is the * ??? The unit powers up to a "Ready to copy" screen and there is no asterisk on the numeric pad or LCD touch screen.

Posted by on

  • DigSenders Dec 03, 2008

    Bingo... and thanks for the help. Note: you have to hold the 2 and 8 keys for a second or two before pressing the "Alternate Functions" button a second time.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 65 Answers

Sometimes it is actually a sysbol that looks like a prifile of a face or head. I'll post a pic if you need it. I hope this helps.

Posted on Dec 01, 2008

  • 1 more comment 
  • Maurice Holliday Dec 02, 2008

    Here is the manual but it says the same thing. I think you will be looking for the recall key instead of the * key. I have more resources that I can email you. Post to this thread if you are interested.

  • Maurice Holliday Dec 03, 2008

    OK, I have been wondering about this one and I think I got it figured out. On the left side of the machine there is a button that says "additional functions". You will have to lift up the flap. Use that key instead of the * key. Try that and PLEASE reply back. I'd like to know if that is the case. Thanks.

  • Maurice Holliday Dec 03, 2008

    Sweet, I'm glad I could help.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pf-03 printhead reset


Procedure to enter Service Mode Canon ImagePROGRAF W8400
Turn power off
Hold paper feed button and info button while powering on
Release at initializing screen
Once in service mode, perform a printhead reset.
In Case You Still Having Problem Then Follow Us For On :
Canon Printer Support

Apr 07, 2013 | Canon 2251B003AA PF03 Print Head ONLY...

1 Answer

How can I Fix System Error E197 for Canon ir2016?


it relates to communication between the boards.remove the rear cover and then remove all the connection of the boards and then reinsert them.then on the machine and go to service mode by pressing * 28 * and then to CLEAR option and clear the ERR. if this not work then u have to change the board.

Sep 08, 2011 | Canon CLC 1140 Copier

1 Answer

We have a problem with copier ir 5000 troble E 061 002 or E 061 001 What should I check and I do krn pre-exposure non-flame lamp


enter service mode( * 28 * >copier>option>PO_cont> off> ok) and make copies if erroir code does not display, replace potential sensor.check dc controller.

Dec 17, 2010 | Canon imageRUNNER 5000 Copier

1 Answer

I have problem in CLC 5000 machine. There are some errors. Error


clean or replace your pattern reader also turn image off in service mode this is only a temp solution and you can get miss regristation later on

Dec 27, 2008 | Canon CLC 5000 Copier

1 Answer

Canon CLC5000 fixing cleaning rollers


only the lower one YOU MUST HAVETHE UPPER ONE IN THE MACHINE THERE IS A SENSOR THAT TELL THE MACHINE

Dec 02, 2008 | Canon CLC 5000 Copier

3 Answers

CLC5000 fuser oil into clc4000


Chance are almost zero. I dont believe there is any differenece.

Apr 16, 2008 | Canon CLC 4000 Copier

1 Answer

Davor skopje


sorry for my bad english but, this is an answer:

your problem refered to a cleaning web, of the upper fuser roller, check this web and you can see, its finish, if you havent this, you can turn arround, but observe vary well his position, then
after of remplacement, you have reset de web alarm,

when you relocate all that pieces in her order, turn on the copier, then after this send the error code, push the buttons in this secuence...

( * ) ( 2 and 8) thogether ( * ) to enter service mode

then push ( func )

after push ( fuser )

after push ( E005-RLS )

and then turn off and turn on the copier and ready, thats all

if not work, check your sensor web position and repeat the E005-rls procedure

for more info, you can obtain the clc5000 service manual to download in www.yoreparo.com forum,

or send me an email, can i help you, good luck, budy.

Dec 20, 2007 | Canon CLC 1000 Color Copier

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

70346 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...