Where can I get an AC adapter for a go video LCD tv model# TW1730?

google magnavox 15mf605t/17 power cord

they are readily available on line for less than $10.00

order one from Amazon

I found one through Powerpayless.com at http://www.powerpayless.com/ac-dc-power-adapter-for-protron-pltv-32-pltv32-lcd-tv.html. It works great!

Are you looking for the pwoer cord for the AC adapter or looking for the whole set of adapter with power cord?
http://www.buy.com/prod/compaq-presario-1520-1520ap-1520ca-new-ac-power-adapter/q/sellerid/20485684/loc/101/209134888.html

http://www.chargerbuy.com/lcd-ac-adapter/hp-lcd-ac-adapter/lcd-monitor-hp-compaq-l1520-ac-adapter-12v-5a.html

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.

Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.
Please leave rating if it helps.

You could get one from ebay , but they seem very expensive. http://cgi.ebay.co.uk/24V-AC-power-adapter-Bush-1LCD23TV022-LCD-TV-/360224352429?pt=Televisions&hash=item53df0b68ad#ht_2521wt_1094 (It does say make an offer)
Other models may use the same supply and its cheaper, You could check with the vendor if a cheaper one is suitable for the Bush, after all why pay more for the same thing. http://cgi.ebay.com.sg/24V-AC-power-supply-adapter-BenQ-FP231W-Q23W3-LCD-TV-/330393378073 You just need to make sure the current/wattage and the plug on the end are the same.

I found it on amazon. here UpBright New Global DC 12V 4 Pin DIN AC DC Adapter For Sanyo CLT2054 LCD... . I hope I have helped. Cheers

The only one I could find is thru Remotes.com, just run the model number. The original is no longer available but they do have an alternate replacement, you'll see what I mean. Good Luck.

http://cgi.ebay.com.sg/12V-AC-power-adapter-for-AKAI-LCT2016-20in-LCD-TV_W0QQitemZ250038855786QQihZ015QQcategoryZ3320QQcmdZViewItem

I found your adaptor on Ebay. Click on the link above to see.
thanks
Please Rate Me
George

If I understand your description correctly, you have two TVs that use the same model adapter, and both adapters have failed. In that case, I would suspect a weak design, or you may have put them in some place where they were overheated or zapped by power line surges. If it appears to be a design problem, you may want to consider using a substitute.

The adapter should have the output voltage and current marked on it, for example, 12VDC 2300mA would be a 12 Volt, 2.3 Amp output. The polarity is usually marked with a diagram showing whether the center in or hole in the plug is positive or negative.

You can use an adapter with the same voltage and plug style (including polarity) and the same or greater current output. If you find one with the right voltage and current, but the wrong plug, you may be able to change the plug. Just be absolutely certain you have the wires going to the correct terminals; reversing the polarity could damage or destroy your TV. Do a proper solder job on it; simply stripping the wires and twisting them on will not be reliable.

Sources for adapters include www.jameco.com and www.mouser.com.

Check the instructions for the default resolution for your monitor. Start your computer in the safe mode. In the safe mode, the resolution should come up at the minimum. Now go in to the screen properties and set the resolution recomended for your monitor.

When you start the computer normaly, it should now come up in the last setting that you put it in to while you were in the safe mode.


Jerry G.