- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The on off switch is bad. .it controls the power if it will not switch off. Remove the cord from the wall. Then take the top panel cover off then with a small piece of tape mark the bottom wire on the switch .simply pull the top wire off switch. Tape the end of the wire so it doesn't touch anything. Plug back into the wall it will not run. Replacement of the switch is needed. Unplug cord from the wall. Take the wire off bottom of the switch. The switch should have 2 tabs on it squeeze them ad push the switch out . Go to Radio Shack get a new switch.
Somehow your answer ended up in the Office Shredders problem area. I suggest you resubmit your answer to the correct problem area. When you do, clarify if the lock is installed in the door, in that case, either 1) remove the lock and take it to a locksmith to make a new key (It is expensive if they come to you) 2) Buy a new lock and hide a spare somewhere safe outside your house 3) If it is a pad lock, cut the lock and get a new one.
The machine probably uses a plug like the ones used on computers. It is a smaller plug, like a rectangle with two of the corners tapered. A regular extension cord will not work. Take it back, and look for a power cord for a computer. Take a picture of the plug on the machine you are trying to use before you go to the store. The clerk should be able to help you find the right cord.