Need a remote code for Hitachi 32PD3000E so that my sky remote will alter volume

https://helpforum.sky.com/t5/Sky/Sky-HD-remote-code-for-a-Hitachi-43hb26t72u/td-p/2899528 should work

Is there anything in the owner's manual explaining how to set the remote to a TV manually? You may have to set it up like a cable remote...they need different setting for all of the different brands. Try that and see what happens

The correct code is 1065. Worked for me on HITACHI L42VK04U

just get replacement remote..........
cheers

I have just purchased a LG 42LH2000 Tv but can't seem to get my Sky Plus control to work the volume does anyone have a code to help

It should be a plate in the back of the TV with model number and serial number.
Other brand that use the same code that Alba use are: Accent, Aiko, Aim, Akai,Akiba, Allstar, Ansonic, Audiosonic, Curtis, Daewoo, Dansai, Goldstar, Grundig, Hair, Hitachi, Lenco, Leyco, LG, Memorex, Philco, Noblex, Panasonic, Piooner, Philco, Phillips

TRY 1604

You will need a code in order for the tv functions of you sky remote e.g volume to work.

Click here to find out what remote control version you have.

If you have a remote control was produced after 2002 or there is no sticker

click here to use Sky's code look up tool.

Most SKY+HD Remotes are produced after 2002

I own a One-for-All universal remote (model URC-4220), and my booklet says the setup code for a Hitachi TV is either 0000 or 0145. If these numbers do not work, then I would buy a newer universal remote. They can purchased at Walmart for less than 10 dollars.

The code you need is 0145

1) Switch on the TV set
2) Press the TV button on the Sky Remote
3) Hold down the select and red buttons for 2-3 seconds until the LED blinks twice
4) Press the TV button on the Sky Remote again
5) Enter the 4 digit code for your make of TV
6) The LED should blink twice, if not recheck the 4 digit code used and go back to 1
7) Press the standby button on the Sky Remote (The TV should go to standby)
8) Press select to store this setting
If the TV does not go into standby press the TV button then the standby button, then TV then standby, keep repeating this until successful. This will scan the codes used for a particular make of TV.