Question about Ricoh Aficio AP3800C Laser Printer

1 Answer

Ricoh 3800c Error code sc555

What is the error and how can it be fixed?

Posted by on

  • Anonymous Mar 17, 2014

    has error code sc555

  • Anonymous Mar 25, 2014

    any help with this error would be greatly appreciated

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 132 Answers

SC 555 Pressure roller
fusing lamp

When the fusing unit is not
running in the Ready condition,
the pressure roller fusing lamp
keeps ON with full power for
100 consecutive seconds.

Replace the fusing unit.

Posted on Dec 01, 2008

2 Suggested Answers

  • 4 Answers

SOURCE: Ricoh 3800c error code SC555

This means the pressure roler thermistor is out of position or defective. Take out the fuser, the thermistor is a little pad that sits against the lower roller. Check that it is clean and that it is touching the roller, this fault is telling you that the press roller heat lamp stayed active for 100 seconds and the code is produced to prevent damage to the machine. I hope this helps.

Posted on May 14, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix SC555 error ?


Same way you reset 542 enter service mode and cycle power

May 21, 2014 | Ricoh Aficio Office Equipment & Supplies

1 Answer

Printer isnt working properly


Yes people do, its a Ricoh box call your local Ricoh dealer, and they/we do service these, your problem is a hot section error.

Mar 12, 2014 | Lanier LD533C Magenta Toner Cartridge...

1 Answer

My Ricoh aficio 3800c keeps stalling with error code sc220-4. How do I fix it?


Hi. The SC220 issue is a known one on the 3800c. It's a firmware related problem, and the code, which points to the synchronizing detector boards, is erroneous. You can read more about it, and possible ways to avoid it here.
Updating the firmware to get rid of this problem is not an easy job.

Nov 07, 2011 | Ricoh Aficio AP3800C Laser Printer

1 Answer

Service Code Error SC555. This machine is not connected to the network. There is not an obvious paper jam. Can you describe a possible fix. Carolann


SC 555 is the main motor error. the main motor needs replacing. its the only solution. the main motor fits at the back of the machine. if you open the back cover, you will be able to see it.

Nov 19, 2010 | Ricoh Aficio MP1600SPF Copier

1 Answer

Mp6001 with sc555 error code


Fusing lamp overheat error (rear)
555 A
After the fusing
temperature reaches the
target temperature, the
fusing lamp does not turn
off for 20 consecutive
seconds.
?? Fusing thermistor defective or out of
position
?? Power supply board defective

u need a servise engineer to reset/fix it

Nov 18, 2010 | Ricoh Aficio MP1600SPF Copier

1 Answer

Ricoh 3800c call for service


On the screen where it says "Call for service," there should be an error code (starting with "SC" and ending with a 3-digit number). This code can tell you what is wrong with your machine -- what code is displayed?

Does turning the machine off (with the main, orange power switch) and then back on clear the error message?

Feb 11, 2010 | Ricoh Aficio 3800CMF Laser Printer

1 Answer

Wen i turn the switch on in my ricoh aficio ap 3800c this shows in the screen cs999 what is that


This is a firmware error code. You are going to need a service tech to reload the firmware. Make sure they use the latest version with any and all updates included.

Dec 19, 2009 | Ricoh Aficio AP3800C Laser Printer

2 Answers

We have a Ricoh aficio 2051sp with error code SC555 what does this mean?


you will need to remove these and test with a multimeter. we are in michigan do you need a ricoh copier service 248-677-8112

Oct 07, 2009 | Ricoh Aficio MP1600SPF Copier

1 Answer

I have problem with aficio 3800c it is showing


SC 560 Zero Cross Error

When the power switch is turned on. The machine checks how many Zero-cross signals are generated during 500 ms. If the number of Zero-cross signals is more than 66 or less than 45 and the condition is detected more than 10 times this code is shown.

Cause is electrical noise in the supply from the power cord.
Solution
  • Change to another power wall socket
  • Change power cord
  • Replace main PSU (Power Supply Unit)

Aug 30, 2009 | Ricoh Aficio AP3800C Laser Printer

2 Answers

Ricoh 3800c error code SC555


fuser related -- call tech to reset --- thermistors

Dec 01, 2008 | Ricoh Aficio AP3800C Laser Printer

Not finding what you are looking for?
Ricoh Aficio AP3800C Laser Printer Logo

1,236 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ricoh Office Equipment & Supplies Experts

quennie732

Level 2 Expert

393 Answers

OfficeServiceAjnc
OfficeServiceAjnc

Level 2 Expert

183 Answers

Bernard D'Souza

Level 2 Expert

161 Answers

Are you a Ricoh Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...