Question about Mitsubishi WD-52525 52" Rear Projection HDTV

1 Answer

Blue gostly shadows on picture Model # WS B55

I called a repair shop and they said that it was problably a convergence board problem. I cannot manually adjust the blue convergence to the left to match it up with the yellow crosshairs. they quoted me a price of 300-400 $ does this sound right? I went into the advanced convergence menu and can not get them to line up on the grid either. Is the replacement IC hard to replace?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 38 Answers

That's a fair price. You can do it yourself, but I've tried showing people how, and some get it most don't. If your handy with repairing things and know how to solder and have a voltmeter, then maybe. You'll need 2 output chips that are original sanyo made chips. Then some solder in fuses and will need to check the resistors around the chips. Then after replacing, reconverge set. I charge the same as this guy. That's average as long as you get good chips put in, not cheap chinnese knock-offs. Make sure they do both as well, not just the bad one.

Posted on Dec 05, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Mitsubishi 1080HD model WS-55315 colors are not correct. The blue is good and the green seems to be, everything else seems to be a shade of light brown or tan. I thought maybe the red tube was bad but...


The tv have a problems known as a convergence pictures problems,it is dead.Tv have any colors lines like R,G,B mis alignments,also tv have any colors shaded shadows pictures or a 3D pictures look alike?Yes,than the tv have a convergence board problems and it is dead to causes all of these problems.The tv convergence board must have to repair like replacing 2 STK convergence ICS and some or all of it resistors too.To fixed the tv convergence board to solved the tv convergence pictures problems.The tvs shops repair a DLP tv convergence board will cost u like $300-$350 for parts an labors.

Sep 12, 2011 | Mitsubishi WS-55315 55" Rear Projection...

1 Answer

9 year old TV...red shadowing. Is a bulb out?


No,this tv don't have a projection bulb inside,it used CRTS tubes like R,G,B guns technology.The tv problems u are having it is call convergence problems,it is dead.The tv convergence board it dead or dying that why tv have R,G,B colors lines misalignments,have colors shadows picture or have 3D pictures look alike.The tv convergence board must require changes like 2 STK convergence ICS and some or all of it resistors too.To fix the tv convergence board to solved the tv picture convergence problems.The tvs Shops will cost u like $300-350 for parts and labors.

Jun 13, 2011 | Mitsubishi WS-55511 55" Rear Projection...

1 Answer

My Mitsu rear-projection WS-B55 was purchased in '03 or so. Now the screen is sometimes turning red. I can do a system reset, and the color goes back to normal. Then it eventually (maybe days later)...


No,pictures go all red?Pictures have colors shaded shadows or 3D pictures look alike?Yes,than the tv it is developing a problem known as a convergence problems it dying.The tv convergence board have problems,must be resoldering those 2 or replaced 2 STK covergence ICS and some or all of it resistors too.To fixed the tv convergence board,to solved the convergence picture problems.The shop,will cost u like $300-350 for diagnose the problems and do all the resoldering work or replaces those parts on the tv convergence board.

Apr 08, 2011 | Mitsubishi WS-55809 55" Rear Projection...

1 Answer

There is a blue shadow (especially around on screen graphics, lettering etc.) when in HD mode. I attempted to align the colors through the color convergence but the blue alignment did not work. I also...


No.This tv have a convergence problems,it dead.The tv have R,G,B colors lines mis alignments,have colors shadows pictures or 3D pictures look alike?The tv convergence board,must be repaired by repacling 2 STK convergence ICS and some or all of it resistors too.To fixed the tv convergence board,to solved the tv picture convergence problems.The shop,will cost u like $300-350 for parts and labors.

Feb 14, 2011 | Mitsubishi WS-65807 65" Rear Projection...

1 Answer

The top and bottom of the picture makes a rainbow effect toward each other in the center of the screen++++++++TV. model 3 ws55807 it's a 55 inch screen the problem occurs all the time. I have no TV repair...


This tv have a problems known as a convergence problems,it dead.Tv have colors lines R,G,B mis alignments,have colors shadows pictures or 3D pictures look alike?Yes,than this tv have a dead convergence board.The tv convergence board require changes 2 STK convergence ICS and some or all of it resistors too.Fix the tv convergence board to solved the tv convergence pictures problems.The shop,will cost u like $300-350 for parts and labors.

Feb 08, 2011 | Mitsubishi WS-65807 65" Rear Projection...

1 Answer

There is a gost and crazy color


Tv have a problems known as a convergence problems,it dead.Tv have colors lines R,G,B mis alignments,have colors shadows or 3D colors look alike?The tv convergence board have dead 2 STK convergence ICS and some or all of it resistors too.These parts must have be replaced on the tv convergence board to solved the tv picture convergence problems.The shop,will cost u like $300-350 for parts and labors.

Jan 01, 2011 | Hitachi 43FDX15B 43" Rear Projection...

1 Answer

Hitachi 62 v569a has a blue gost line around the sides i replaced the bulb and didn't seem to help can u give me a idea what might be wrong thx


The tv have a problems known as a convergence problems,it dead.The tv have colors lines R,G,B mis alignment,have colors shadows pictures or 3D pictures look alike?The tv convergence board have dead 2 STK convergence ICS and some or all of it resistors too.These parts,must be replaced on the tv convergence board to solved tv pictures convergence problems.The shop,will cost u like $300-350 for parts and labors.

Nov 17, 2010 | Hitachi 62VS69 62" HDTV

1 Answer

My picture flips to and from a balanced convergence to one that seems to arc? Any thoughts on a repair?


Tv have a convergence problems,it dead.Tv have colors lines R,G,B mis alignment,have a colors shadows pictures or 3D look alike.The tv convergence board have 2 STK convergence ICS and some or all it resistors are dead.These parts on the convergence board,must be replaced to solved the tv picture convergence problems.The shop,will cost u like $300-350 for parts and labors.

Oct 28, 2010 | Mitsubishi WS-65819 TV

1 Answer

Hi, I have the ws-65907 65", it was working last


No,this problems is not the projection lamp problems.The tv now have a problems known as a convergence problems,it dead.The tv colors lines R,G,B mis alignment,have colors shadows pictures or look like 3D pictures.The tv convergence board,the 2 STK convergence ICS and some or all it resistors are dead.These parts on the tv convergence board,must be replaced to solved the tv picture convergence problems.The shop,will cost u like 300-350 for parts and labors.

Oct 26, 2010 | Mitsubishi WS-65907 65" Rear Projection...

1 Answer

I was told by a repairman that my convergence module is bad on my ws 55511 or best buy model ws b55 was wondering what a convergence module cost. my power went off and when it came on the red images were...


Any shop with experience should be able to replace the convergence ICs which are the likely problem. This type of repair will cost less than the boaqrd replacment and won't require a conmplete reconvergence adjustment. The parts cost around $25-$40 each (there are 2).

I would look for someone that is able to change the ICs rather than the entire board.

Dan

Jun 22, 2010 | Mitsubishi WS-55511 55" Rear Projection...

Not finding what you are looking for?
Mitsubishi WD-52525 52" Rear Projection HDTV Logo

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1207 Answers

The Knight
The Knight

Level 3 Expert

72620 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...