Question about Lands Phones

1 Answer

Hi, I have a 2 line KX-T6 6702 model cannot make outgoing calls, I have changed all wiring from the phone to outside connections. I have no volume on the message report with it showing 8 on the volume level. Also heve static on the outgoing only.The phone company has checked the ougoing from there side they say they can make calls from there lines. Help!!!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I fixed the problem real fast by throwing the panasonic junk in the garbage and replaced the system with a RCA 2 line digital. Thanks

Posted on Dec 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Line not assigned


make sure that your service provider has installed 3 individual lines into the building
check that the 3 incoming lines are not all together in the plug at the wall
you may need a telephone technician to check it out

Feb 17, 2016 | Panasonic Kx-tda100 Kx-tda100 Digital...

1 Answer

No access to outside lines from one jack


Hi, What you can try is check the plug connection. If they are bent or broken. Replace the cable to and from the phone. If that is OK then you know the phone is the problem. Take it to be repaired.

Jan 20, 2014 | Panasonic KX-T7730 Corded Phone

2 Answers

Panasonic KX-T7730, we have a 824 phone system and cordless handsets (kx-tg1711) we cannot make outgoing calls on these handests but can take incoming calls and can transfer calls. how do we programme


  • Locate the program and auto-store button on your telephone. You will be using these to customize many of the features on your KX-T7730. The program button is used to enter or exit programming.

  • 2

    Program your outgoing line preference, i.e., the line you prefer to seize when you go off hook. Press "Program" "1" "1" "store" for no line. Press "Program" "1" "2" "Store" for an idle outside line. Press "Program" "1" "3" "Outside Line Number" "Store" for an assigned outside line. The outside line number will be a single or double-digit number that is set through your phone system.

  • 3

    Program your incoming line preference, i.e., the line you prefer to answer when you go off hook. Press "Program" "2" "1 "Store" for no line. Press "Program "2" "2" "Store" for ringing line. Press "Program" "3" "Outside Line Number" "Store" for an assigned outside line.

  • 4

    Program your flexible CO buttons. These are the inner row of 12 lighted buttons. Your outside lines need to be programmed to these--you can choose any of these 12 buttons in any order. Press "Program" "CO Button" "0" "Outside Line Number" "Store." The outside line number will be a single or double-digit number that is set through your phone system.

  • 5

    Program any other unused flexible CO buttons for an extension number or any frequently dialed phone number. Press "Program" "CO button" "1" "Extension Number" "Store" or "Program" "CO Button" "2" "9 + Phone Number" "Store". A "9" must be entered at the beginning of a phone number to tell your phone system to seize an outside line before dialing, e.g., "9-1-212-555-1234."

  • 6

    Locate the programmable feature buttons (the row of 12 solid buttons on the right). These buttons are basically one-touch buttons that can be set for extension numbers or phone numbers. Press "Program" "(PF) Button" "Extension Number" "Store" or "Program" "(PF) Button" "9 + Phone Number" "Store." Remember to press "Program" again to exit programming.

  • 7

    Locate your "FWD/DND" button. This button is used for setting "Call Forward" or "Do Not Disturb" on your telephone. To set call forwarding, go "off-hook" either by lifting the receiver or pressing speakerphone. Make sure you go to intercom and not an outside line. To forward all calls, go off-hook, press "FWD/DND" "1" "extension number" (the extension number that you wish to forward all your calls to) "#". After you hear a confirmation tone, place the receiver on-hook. The steps to set call forwarding for busy/no answer are the same as above, except you will press "2" in place of "1". To cancel call forwarding, press "0" in place of "1".

  • 8

    Program "Do Not Disturb," which stops your phone from ringing--any callers will just hear a DND tone. To program, go off-hook, press "Program" "4" "#" on-hook, to set. Press "0" instead of "4" to cancel.

  • 9

    Locate the message button--this works in coordination with your message light at the top right of your telephone. If the light is lit, press "message" to hear a message left to you either by another extension or a voice mail system. The message button can only be programmed as a message or one-touch button. To program as a message, press "Program" "Message" "3" "Store." To program as a one-touch, press "Program" "Message" "1" "Extension Number" or "Program" "Message: "2" "9 + phone number."

  • 10

    Return your KX-T7730 to its default settings by pressing "Program" "#" "*" "Store."



  • Read more: How to Program a Panasonic KX T7730 ' eHow.com http://www.ehow.com/how_7159736_program-panasonic-kx-t7730.html#ixzz1eYPzbevZ

    Nov 23, 2011 | Panasonic KX-T7730 Corded Phone

    1 Answer

    I have a Panasonic KX-T7731 phone. I would like an outside line to connect when the headset is picked up rather than the intercom.


    A 7731 phone is compatible with about 18 different Panasonic phone sytem cabinets. Panasonic calls this line preference-outgoing and, in a TA series, which you're most likely to have, you press PROGRAM and dial 12 STORE for idle line, or 13 and a number from 1-8 for a specific line and STORE. 11 STORE puts it back to no preference.

    Carl

    Aug 20, 2010 | Panasonic KX-T7731 Corded Phone

    1 Answer

    KX-T7730 - Used to have 3 incoming/outgoing lines. Have cut this down to 2(lines 1 and 3). Outgoing calls are automatically selected by line 3, 2, 1. When calling out the second person can't get an outside...


    If you are using the KX-T7730 phone on a Panasonic KX-Txx 308 or 824 system.
    From the Switchboard / Main telephone ( usually ext 101, 10 or 9 ) with the handset on the cradle/hook :
    1. Press PROGRAM * # followed by the system password ( default is 1234).
    2. Now press 400 and then SP-PHONE. Enter the line number you wish to change. ( In your case 2)
    3. Press AUTO ANS / MUTE to change between Connect and Not Connect.
    4. Press AUTO DIAL / STORE to save your changes.
    5. Press PROGRAM to exit program mode and you are done.

    Mar 17, 2010 | Panasonic KX-T7730 Corded Phone

    1 Answer

    " line is use" on phone lcd can't make calls


    I had this also and changed by connection to my computer and or fax machine. Double check your connections.

    Mar 27, 2009 | Panasonic KX-TG1033S Cordless Phone

    1 Answer

    KX-T7600 series outgoing calls


    1. Press "PROG" (Program)
    2. Press "1" and "9" (19)
    3. Press "ENTER"
    4. Select "Idle Line"
    5. Press "ENTER"
    6. Press "EXIT"

    Jan 30, 2009 | Panasonic KX-T7630 Corded Phone

    1 Answer

    RINGER VOLUME


    Go back to that original 7433. Beg, borrow, or steal one of those phones from someone else and plug it back in. Have someone call you on the intercom and make sure the AUTO ANS button is not lit. Does it ring? Now plug in your 7453 and do the same thing. Does it ring?

    I think I only had one or two of those models and the ringer is a two step switch (3 positions) OFF LO HI on the side of the phone. Make sure it's set to something besides OFF.

    If the phone rings on intercom but not on the outside lines, that's a different problem.

    Carl

    Sep 05, 2008 | Panasonic KX-T7453 Corded Phone

    1 Answer

    Several line can not make out call


    You may not be progammed for outside call on those lines or they may be Centrex lines which require a "9" to be dialed first.

    Dec 25, 2007 | Panasonic KX-T7630 Corded Phone

    Not finding what you are looking for?
    Lands Phones Logo

    Related Topics:

    59 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Lands Phones Experts

    kakima

    Level 3 Expert

    102366 Answers

    Cindy Wells

    Level 3 Expert

    4954 Answers

    yadayada
    yadayada

    Level 3 Expert

    70387 Answers

    Are you a Lands Phone Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...