Question about Philips Magnavox Learning Universal Remote
Great News!! We can program most Philips Universal Remotes with Automatic Code Searh. Here's how it works on most of our remotes.
Programming with Code Search
1. Manually turn on the device (TV, VCR, etc.) to be controlled.
2. Press and hold Code Search button until the red indicator stays on. Release the Code Search button.
3. Press and release the desired mode button (TV, VCR, etc.). The red indicator blink, then stays lit.
4. Press the Channel Up button repeatedly (up to 300 times) until the device could be controlled changes channel. The red indicator blinks, then stays lit. If you accidentally overshoot the code required, press the Channel Down button to backtrack through the library until the device changes channel. Pressing Channel Up changes direction to forward again. Press and release the Mute button to install the code.
The above assumes that you want to store the VCR you want under the VCR but, Cable codes under the CBL, etc
Note: if the device does not have a chat channel at a button, you should Play (VCR only) or Power instead.
Here is a Code List on PDF that shoud be universal for most remotes. It worked for me.
Hope this helps you out, good luck.
Posted on Dec 02, 2008
Tips for a great answer:
Dec 28, 2015 | Philips Remote Controls
Mar 29, 2008 | Philips Magnavox Learning Universal Remote
Nov 25, 2012 | Philips SRU2103S-27 Remote Control
Mar 13, 2011 | Philips Universal PH301S Remote Control
Jun 15, 2009 | Universal Remote Control Remote Control
May 08, 2009 | Philips 5-Device Universal Learning Remote...
May 07, 2009 | Philips (PM625S) Remote Control
Feb 10, 2009 | Philips Universal PH301S Remote Control
Apr 16, 2008 | Philips Magnavox Learning Universal Remote
125 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: