Question about Betty Crocker BCF1357 Work Top Blender

1 Answer

Blender-motor side 6-lug interface with pitcher shattered. Replacement part avail?

I am not exactly sure which model of BC blender I have, but it looks like all other 6-lug plastic interface to the bottom of the pitchers 6-lug interface have. I would like to know if there is a replacement part for the motor side 6-lug interface? It looks like the armature is approx. 3/8" hex shaft or 10mm hex shaft that this 6-lug plastic interface is pressed onto.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 944 Answers
Re: Blender-motor side 6-lug interface with pitcher...

Is the shattered part able to be "recreated" with a bit of superglue or similar? not to use as such, but just so you could take it to any reasonably competent machine shop and get them to copy it in a similar material. Try and they may be able to help with a relatively common replacement part such as this. Another route to go is to try and find a similar model that isn't working and cannibalise - any local domestic electrical repair shop might be worth a try, or internet exchange forums. Good luck

Posted on Feb 17, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I'm trying to attach assembly to glass pitcher and I can't screw the hex nut to the bearing holder -- so few threads showing through underside of pitcher after all the washers are put on.

If all the parts you have are specific to that particular blender (not a "universal" replacement part) you may have the wrong replacement part. Otherwise, you may not need to use all the parts provided in the package as they might supply several parts used in different models. Contact the part supplier and verify the model of your blender against those they supplied.

Jul 14, 2015 | Waring 007314W Blending Assembly

1 Answer

Where do I find a replacement pitcher?

Link, Can you tell me what brand your blender is? This is usually found under the blender base or right on the front where the buttons are. Then we can tell you whether there are replacement parts or not.

May 08, 2015 | Blenders

1 Answer

Replacement parts

Part 2: Opening up the Braun handheld blender/mixer turbo 600, typ 4191.

A second phase, with the Dremel for working in the direction of the axis and splitting up the tools mounting part, also showed that no other way was available to open the machine7be945c4-ba75-4b59-83da-fc638caa551e.jpg

Oct 30, 2013 | Braun MR 5550 M HC + BC MultiQuick...

1 Answer

Need glass pitcher for model No 54200

Possibly on the cheap at For an unused replacement try typing in your model number at HB's parts wesite located by clicking here . Check out the many www sites like and Besides matching description, I would match the pictures of what you are going for against what you've got as much as possible. Good luck!

Mar 15, 2013 | Hamilton Beach 54200 BlendMaster Blender

2 Answers

Need a replacement pitcher for model56200 typeB17

The same thing happened to me. I ordered a new one and they sent it to me in the mail. You can find replacement parts here:

Oct 25, 2010 | Hamilton Beach 56200 Power Work Top...

1 Answer

KitchenAid Blender Model KSB560GC0. Coupling is ruined. Looks to be a geared part at the base of the unit. [ top of motor ] Also there is a part that is geared at the bottom of the pitcher, attached to...

the older glass jar blenders were sold as a complete ***'y too.
no separate parts were available. i'm sure the stainless jars are sold in the same way...complete.

Jun 24, 2010 | KitchenAid KSB5 Professional Stainless...

1 Answer

Need replacement pitcher for Margarita Mania

I have the same problem. The company say the model is discontinued. If you find one, please let me know.


Sep 13, 2009 | Helman Group Nostalgia Electrics MMA-600...

2 Answers

I need a replacement pitcher for my Bobby Flay blender but can't find one...

I actually have the pitcher, it comes w/the chigger and the blade that connects to the bottom of it.

this part is brand new, let me know if you still need one.

Jun 16, 2009 | Blenders

Not finding what you are looking for?
Betty Crocker BCF1357 Work Top Blender Logo

Related Topics:

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Betty Crocker Blenders Experts

Bruce Showalter

Level 2 Expert

79 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Betty Crocker Blender Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides