Question about EverFocus EDSR1600 16 CHANNEL 160GB DIGITAL VIDEO RECORDER with AUDIO&REMOTE OBSERVATION

1 Answer

Recording Hi I can not get it to record. I have pressed the record button but nothing happens. Please help. Thank you Nim

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 50 Answers

The EDSR1600 will not go into manual recording mode (by pressing the REC button on the front panel) unless all of the automatic modes are disabled and the hard drive bays are firmly pressed in and locked. Press the MENU button, select ALARM and turn everything in the OPeration column to OFF. Return to the MENU, select MOTION and also turn set all the OPerations to OFF. Return again to the main MENU and under RECORD, set ALARM RECORD OPERATION to OFF, PRE-ALARM RECORD OPERATION to OFF, and PERMANENT RECORD OPERATION to OFF. Note: Turn the JOG wheel clockwise or counter-clockwise to select an option. Press the ENTER button to confirm the option and move to the next field. Press the MENU button to enter, or return to the main MENU. Press the MENU button twice to exit the main MENU. To check if the round key locks on the front of the Hard Drive bay trays are locked, turn OFF the EDSR1600. Open (pull down) the left side front cover and gently pull up on the drive bay handles. If locked, the handles should not lift and the bays should not slide out. After your check, press the bays in firmly to ensure good seating of the Hard Drives. The ESDR1600 should now go into manual RECord if the DVR is working properly. The red REC LED should also light each time a recording is being made. If the REC LED flashes, this means the DVR is recording a field or frame of video.

Posted on Sep 07, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi,I have just bought a Denon dn m991r second hand and I am having problems recording on analog.I press record and DIGITAL IN starts flashing on display,I press play/pause button but nothing happens no...


Go here - http://www.minidisc.org/part_Denon_DN-M991R.html . Get the owner's manual. Read it.

The preset mode changes whether you record analog or digital.

Assuming nothing is jamming or is bent, the weak eject is probably why the guy sold it to you. It can't hurt to take the cover off and watch what happens.

Aug 05, 2012 | Denon DN-M991R Mini Disc Player

1 Answer

Hi ! .I recorded my voice in the MSI 527. How may I play that record ? What button must I set to visualize and ear the archive. Thank you very much Marisa


To play a microphone recording file, press the Menu button once, and then push the Menu button to the right once, and now you should read the message of VOICE appearing on the Display. Press the Menu button again, and then use the Menu button to select a desired microphone recording file by pushing the Menu button to the right or to the left. Once the desired microphone recording file is selected, press the "play/pause" button to start playing the file.
this is all from the manual hope this helps

Jun 26, 2011 | MSI MEGA Stick (256 MB) MP3 Player

1 Answer

Hi there, My problem is I have a toppro tpr2000 hd recorder and sometimes when I record and have finished, and press stop I get 'record is finalizing please wait' which then just freezes on the screen....


It won't damage the recording on your recorder it will mean you won't be able to view the disc on a different machine, possibly. The finalizing of a disc ensures the table of contents is recorded on the disc.
Try a better quality disc?

Feb 07, 2011 | Televison & Video

10 Answers

My flip video camera froze.it wont turn on....


Have you tried resetting the camera? Hold down the power button and the red button simultaneously until the camera shuts off (takes about 10 seconds). Then, just press the power button again and the camera should turn back on. I had the same problem; when I pressed the red button to stop recording, the camera froze, and the red light remained on. I tried resetting it like this, and it seemed to work.

Jan 19, 2009 | Pure Digital Flip Video Ultra Camcorder

1 Answer

Cannot operate svr-925 digital recorder, need manual


How to Record:
1. Make sure HOLD switch (on side of unit with pocket clip) is set to off position (slide to right is off - to left would be hold)
2. For best results set unit with mic(rophone) which is on top of unit toward sound source and press REC/STOP button (Top button on front of unit just below LCD display). Recording will begin and will be indicated on LCD display.
> Red Record LED will be on and the message number, recording time will be displayed on the LCD.
3. To stop recording, press REC/STOP button one time.
* If no other buttons are pressed within 1 minute at stop position, it will power off automatically.
4. Pause during recording by simply pressing MODE/PAUSE button- press button again to resume.

There is a Voice Operated System (VOS) Recording button on left side also. You can record with voice activation to conserve recording space but I have found that you lose a portion of the recorded sound as it activates and if there is no sound for a very few minutes the unit powers off and you will get nothing further recorded. I recomend just keeping VOS in off position.

5. To erase a recording: Select the message number you want to erase and while it is stopped (the message number will appear in LCD with the length of recording showing also)
Press and hold the ERASE button until the LCD begins blinking "ERASE" then, while it's blinking simply press the erase button again and the recording will be erased.

6. To play back a recorded message find your message by "toggling" the switch on the right side of the unit that says INDEX. That switch is the fast forward/reverse play etc. To Play simply push the switch in. This button/switch takes a little practice to use but the Play portion is straight forward. Use the front buttons to pause and stop during playback.

Hope this helps.

Jan 04, 2009 | Sims SVR-S825 Handheld Digital Voice...

1 Answer

Record, playback problem


Hi Nick,

The fuzz/white noise is a little confusing and it seems to be saying that you are recording something vs trying to record incorrectly and getting nothing at all. Anyway, despite that, I would try going over your recording steps first.

First off make sure your Hi-Z input is not set to the Hi-Z or guitar setting. It is possible your that MicroKorg is overloading the input and distorting. You should however have heard that in the headphones too, so I'm not so sure that's the problem. The next thing to check is to make sure your input is assigned to the track you expect to be recording on. (Press the input's button to check this. The select/record button over the track should flash).

Next make sure your track is armed for recording before you press 'play+record' (Record button above the track should light steady when recording).

Hope this helps.

bd.

Nov 21, 2008 | Tascam DP01 All-In-One Recording Package...

1 Answer

Help! Stopped Recording


Do you have a remote? Some camcorders you have to hit the record pause button on the remote and then hit pause. It then begins recording. I hope this works for you.

Jul 13, 2007 | Samsung VP-D10 Mini DV Digital Camcorder

1 Answer

Problem recording


The EDSR1600 will not go into manual recording mode (by pressing the REC button on the front panel) unless all of the automatic modes are disabled and the hard drive bays are firmly pressed in and locked.

Press the MENU button, select ALARM and turn everything in the OPeration column to OFF. Return to the MENU, select MOTION and also turn set all the OPerations to OFF. Return again to the main MENU and under RECORD, set ALARM RECORD OPERATION to OFF, PRE-ALARM RECORD OPERATION to OFF, and PERMANENT RECORD OPERATION to OFF.

Note: Turn the JOG wheel clockwise or counter-clockwise to select an option. Press the ENTER button to confirm the option and move to the next field. Press the MENU button to enter, or return to the main MENU. Press the MENU button twice to exit the main MENU.

To check if the round key locks on the front of the Hard Drive bay trays are locked, turn OFF the EDSR1600. Open (pull down) the left side front cover and gently pull up on the drive bay handles. If locked, the handles should not lift and the bays should not slide out. After your check, press the bays in firmly to ensure good seating of the Hard Drives.

The ESDR1600 should now go into manual RECord if the DVR is working properly. The red REC LED should also light each time a recording is being made. If the REC LED flashes, this means the DVR is recording a field or frame of video.

Jan 26, 2007 | EverFocus EDSR1600/500

1 Answer

Can't record voice


Try following - 'Ready to record' briefly press 'O' button, if I hold too long same results as you experience

Aug 20, 2006 | iRiver H10 MP3 Player

1 Answer

Axim Record Button Does Not Work


Try taking off the left black rubber stripping and see if the button underneath is lined up correctly. Perhaps take a look inside to see that all the contacts are good.

This site will help with how to take off rubber part and open the Axim: http://www.gethightech.com/Merchant2/merchant.mv?Screen=CTGY&Store_Code=GHT&Category_Code=_axim_takeapart

Sep 14, 2005 | Dell Axim X5 Pocket PC

Not finding what you are looking for?
Televison & Video Logo

214 people viewed this question

Ask a Question

Usually answered in minutes!

Top EverFocus Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75581 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

80378 Answers

Are you an EverFocus Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...