- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
there must be fault in your screen. you should change your screen display of yout phone. this will fix your problem.contact your servicemen to do this.format your phone after changing your display screen.
With the handset on the cradle press Program * # followed by the system
password ( default is 1234). Now press 000 and then Sp-Phone.Enter the
year and then scroll to the month with the right scroll key (located at
the right bottom corner of the phone). To change the month use the AUTO
ANS / MUTE button. Now scroll right again and change the date and day.
To change the day again use the AUTO ANS / MUTE button. Now scroll
right again and the time will appear. Set the time. To change am/pm
scroll to it and again use the AUTO ANS / MUTE button. Press program to
exit program mode and your done. Please rate this answer if it was helpfull Thank you.
THe older norstar systems you had to go into programming to change time and on the newer systems press feature * time on your phone and follow the prompts. On the older systems go in to programming press feature ** 266344 (config) then pswd 23646 (admin) on your key pad this gets you into programming press next until you get to change time. You need an overlay which can with your phone system manual. If need more info please ask agian hope this helps.
If you are using this phone with a Panasonic KX-TDA 30/100/200/600 system. From the Switcboard / Main telephone or Managers phone with the handset on the cradle/hook press Program * * or Program * # followed by the system password ( default is 1234). Now press 000 and then ENTER. Enter the last 2 digits of the year and then select the month with either SEL+ or AUTO ANS / MUTE. Now scroll right with the right arrow key and change the date. Now press the NEXT button on the screen and the time will appear. Set the time. Press AUTO DIAL / STORE to save your changes. Lift the handset and put it down to exit program mode. PLEASE PLEASE rate/vote this answer if it was helpfull. THANK YOU
Changing the time on a Partner system is done on either ext 10 or 11. At one of those ext's press the feature key and "00"
next press the left hand intercom twice
the display should say system programming
enter in "#103"
the display should say system time and the current programmed time
enter the new time in 24 hour format
press feature "00" to logout
hope that helps