I have a lexmark printer x1270 but I don't have the CD to download to make the printer work. Can you help me?

Please visit the Lexmark website to download and install the Lexmark X1270 Printer Driver on your computer. Select your operating system, download and execute the file. Follow the instructions on your computer screen.
For the Lexmark OCR scan software, it is only available on the Lexmark installation disc that came with your printer. If you lost the disc, please contact Lexmark Technical Support Center for assistance.

Scanning documents to PDF file on your Lexmark X1270 printer requires the Lexmark OCR scan software installed on your computer. If you don't have the installation disc that came with your printer, please contact Lexmark Technical Support Center for assistance.

You can download the Lexmark X1270 drivers from the Lexmark website for free (note: Lexmark X1270 printer works on Windows OS only.) Go to this link: Lexmark X1270 Drivers. Select your operating system by clicking on change OS.


Click on FILTER.


Then click on the Complete driver under Recommended Downloads.
Download, execute the file and follow the instructions on the software.
I hope this information has been helpful. Thanks.

you can go to the lexmark website and download them

I need a download for a 1270 series Lexmark printer (installation disk). Please help.

Down load the driver directly from lexmark and get it installed

http://support.lexmark.com/cgi-perl/selections.cgi?ccs=229:1:0:-1:0:0&target=http://downloads.lexmark.com/cgi-perl/downloads.cgi&lxkprod=Z816&req=:::-1::

Download the driver from here:

http://downloads.lexmark.com
/cgi-perl/downloads.cgi?lxkprod=Lexmark+X1270

hi
you will find them here Search Results - Lexmark X1270


riz.

The only way to setup the printer without the proper drivers would be to use windows add new printer. However windows does not have lexmark x1270 listed. You can dlownload the software from lexmark & install the software / drivers without using the cd.
http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:1:0:537:0:0
You need to choose your version of windows to continue.
This next site will show you how to connect your x1270.
http://www.lexmark.com/publications/eng/1200/index.html
Also listed is the user's guide manual.
Hope this can help you.
please vote

Here you go, a direct link to the page for any O/S you need. Just download and install


http://downloads.lexmark.com/cgi-perl/downloads.cgi?lxkprod=Lexmark+X1270