KENWOOD KDC 3024 IN CAR COMPACT DISC PLAYER

check the balance in the player. if it is good check the connectivity of the speaker.

you can download user manual from the below link. use it if you are not having user manual. Kenwood KDC X396 Manuals

Follow the instructions on pages 17-18 of this manual.

The installation instructions begin on page 20 of the manual.

Sounds like you need to send it in for service.
Kenwood Service

Hi.

Use the audio control settings. Here an extract from manual:



Here the full manual:KDC-4020 KDC-3020 KDC-2020 KDC-1020 KDC-1020S.

Regards.

Ginko.

http://manuals.kenwood.novenaweb.info/languages/EN/support/manuals/KDC4024-3024-307.pdf

I would recommend running a four channel amplifier using component speakers up front and co-axial speakers in the rear. You can add more speakers up front, but it depends on what you're trying to accomplish in your car. Do you want it louder? Do you want it clearer? Any system will benefit from an amplifier. More power to your speakers will give you better sound because you'll have more accurate control over the speaker cone. This extra power will result in better clarity, not only at high volume, but low volume too.

AM, FM

And Left and Right Track Select

White and white Stripe = Front Left

Gray And Gray Stripe = Front Right

Purple and Purple Stripe = Right Rear

Green and Green Stripe = Left Rear

Hi Caradio,
I found this on a forum and some people got it to work, If you do not have the remote I do not know any more about what to do for you.

During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds (so that “…” disappears).
Then using your remote enter your code