Question about Arc'Teryx M280 Mixed Climbing Harness

1 Answer

Washing a Climbing Rope

How do I Wash a Climbing Rope?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,336 Answers

Step1 Fill a large bucket with warm water. Step2 Add rope wash. (You can purchase it at a BlueWater retailer; follow the link in Resources for a list of locations. If you don't want to travel to the nearest store, you can request that they ship you some.) The instructions on the rope wash package will tell you how much to add, based on how many gallons of water you have in your bucket. Step3 Add your rope to the wash. Step4 Start working the dirt off the rope with your hands. Swish the rope around and flip it over a few times. Spend about 15 minutes doing this. Step5 Allow your rope to sit in the wash for 2 hours. Step6 Squeeze the water out of your rope as you slowly take it out of the bucket. Step7 Lay out your rope in the sunshine to dry.

Posted on Dec 01, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wash machine ge space saver wsm2780hdwww agitator drive bell needs replaced have the part. problem is the old drive bell or hub is stuck inside at the top of the agitator itself. how do I get it out?


the agitator has to be pulled out manually the whole pc comes out from the bottom, place a rope or strong string under it and pull up hard. then u can remove the 7/16 nut and take off the agitator coupler or bell housing. , hope this helps
wash-machine-ge-space-saver-wsm2780hdwww-fgv1ctnzjgewe3hu2qpqylbk-3-0.jpg

wash-machine-ge-space-saver-wsm2780hdwww-fgv1ctnzjgewe3hu2qpqylbk-3-2.jpg

wash-machine-ge-space-saver-wsm2780hdwww-fgv1ctnzjgewe3hu2qpqylbk-3-5.jpg

wash-machine-ge-space-saver-wsm2780hdwww-fgv1ctnzjgewe3hu2qpqylbk-3-9.png

May 03, 2015 | GE Washing Machines

2 Answers

How to tie a rope around a large tree


Trucker's knot. I use this because it provides great tension and offers a quick release. It's great for mainlining a tarp or even a clothes line.

Oct 26, 2013 | Camping, Backpacking & Hiking

1 Answer

Need to tie a knot.


wrap rope over itself back up and through the hole and pull both ends need more knot repeat but be careful to center new knot to exisisting knot

Apr 11, 2013 | Rock & Ice Climbing

1 Answer

What is tying in in ice climbing?


Tying in means you are attaching a rope to your harness.

Jan 14, 2013 | Rock & Ice Climbing

1 Answer

I have a Booda Rope Bird Perch and I wanted to know if there was a specific way to clean this product?


Washing a rope perch is actually quite simple. All you need is a product to rid of bird waste - such as **** Off. Begin by spraying the rope with this product to loosen debris. Rinse your rope under warm water and place inside a pillow case. Put the pillow case in the laundry machine and wash. Make sure to air dry the rope.

Aug 30, 2012 | Allied Precision Birds

1 Answer

I'm sure that beefs and rodrigo have misunderstood vpbjo's problem: to wit... You have to disconnect the caribiner to load the gri-gri. If you drop it on the gym floor, that's ok. If you drop it half...


Straight from the Instruction Manual: This product is a belay device for
the leader or second on a rope.
It has been developed for indoor
wall climbing or for climbing
on well-protected sport routes
where anchors meet the UIAA
standard. It should not be used
for mountaineering or adventure
climbing.

Any modification is a unknown change in the devices individual load bearing rating, and a compromise in the safey of anyone who would be connected to said device at any time after the modification.

Jun 28, 2009 | Petzl America Grigri Belay Device D14

1 Answer

Rock Climbing Harness with Auto Belay, where to hook on?


Easiest is to hook the swivel carabiner to the belay loop.  This is a sewn loop of webbing that connects the leg loops to your waist belt.

Dec 02, 2008 | Black Diamond ATC Belay/Rappel Device Fall...

1 Answer

What are Belay devices?


These are mechanical friction brake devices used when belaying. They allow careful control of the belay rope. Their main purpose is to allow locking off of the rope with minimal effort. Many types of belay devices exist, and some of these may additionally be used as descenders, for controlled descent on a rope, that is, abseiling or rappeling. There are passive camming devices and active camming devices. Passive camming devices rely on the brake hand and a carabiner to lock off the rope. Sticht plates and the Air Traffic Controller ATC are examples of passive camming devices. Active camming devices have a built-in mechanism that locks off the rope without the help of any other pieces of equipment. A GriGri is an example. The offset cam in the GriGri locks off the rope automatically to catch a falling climber, much like a seatbelt in a car locks off to hold a passenger securely. The GriGri fails at around 9 kN of force. However, a GriGri, with its technology, often makes belayers become less vigilant. The GriGri is not a hands-free belay device. One mistake with the GriGri is reverse threading it. Reverse threading means to thread the GriGri the wrong way around, rendering the camming action useless. However, in a fall, with a reverse threaded GriGri, bending the rope sharply under the GriGri provides more than enough friction to hold a falling climber. An example of traditional belay is the Body Belay or the Hip Belay, where the rope is wrapped around the body to provide enough friction to catch a climber. This is often used in Alpine climbing, where the routes are easy, and the belay must be fast. Ice climbers often use a boot belay, where the rope is wrapped around one boot, thus providing friction.

Dec 01, 2008 | Black Diamond Super 8 Belay Device

2 Answers

Simpson enduro 701 washing machine


After the water pumps out on each of the cycles the spin does not go or start and it gets stuck there.

Oct 28, 2008 | Washing Machines

Not finding what you are looking for?
Arc'Teryx M280 Mixed Climbing Harness Logo

Related Topics:

642 people viewed this question

Ask a Question

Usually answered in minutes!

Top Arc'Teryx Rock & Ice Climbing Experts

kakima

Level 3 Expert

102366 Answers

RatanbssBD

Level 1 Expert

6 Answers

Are you an Arc'Teryx Rock and Ice Climbing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...