Question about Schwinn Wide Ride Pedal

1 Answer

Stair climbers / steppers maintenance

Any general maintenance tips for a stepper?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

" * Read all maintenance instructions thoroughly before beginning work. * In some cases, an assistant is required to perform the necessary tasks, use all precautions. * The safety level given by the design of this equipment can only be maintained when the equipment is regularly examined for damage and wear. * Inoperable components should be replaced immediately or the equipment should be put out of use until it is repaired."

Posted on Dec 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

Alternator Belt Replacement for Stairmaster 4000PT Stepper


Stairmaster Stepper 4000PT Alternator Belt Replacement WARNING: The belts must be properly tensioned. A belt that is too loose will cause slow and sluggish operation. A belt that is too tight will cause excessive noise and belt wear.
  1. Remove side covers.
  2. Loosen the adjustment screw that mounts the alternator to the alternator brace and the pivot adjusting bolt that mounts the alternator to the frame.
  3. Pivot the alternator down and remove the belt.
  4. Make sure the is centered on the pulleys during installation.
  5. Pivot the alternator up or down as necessary to allow 1/4" (0.6 cm) of belt deflection with fingertop pressure at the midpoint between the two pulleys.
  6. Tighten the alternator adjustment bolt. Verify 1/4" (0.6) deflection in the belt.
  7. Reinstall the covers

How to Replace Alternator Belt on Stairmaster 4000PT Stepper

on Mar 10, 2015 | Stairmaster 4000PT Stepper

1 Answer

Stair stepper won't start


Wide Ride Pedal CTGID0 Stair stepper won't start

Dec 01, 2008 | Schwinn Wide Ride Pedal

1 Answer

Stair stepper won't start


Wide Ride Pedal CTGID0 Stair stepper won't start

Dec 01, 2008 | Schwinn Wide Ride Pedal

Tip

Alternator Belt Replacement for Stairmaster 4000PT Stepper


Stairmaster Stepper 4000PT Alternator Belt Replacement WARNING: The belts must be properly tensioned. A belt that is too loose will cause slow and sluggish operation. A belt that is too tight will cause excessive noise and belt wear.
  1. Remove side covers.
  2. Loosen the adjustment screw that mounts the alternator to the alternator brace and the pivot adjusting bolt that mounts the alternator to the frame.
  3. Pivot the alternator down and remove the belt.
  4. Make sure the is centered on the pulleys during installation.
  5. Pivot the alternator up or down as necessary to allow 1/4" (0.6 cm) of belt deflection with fingertop pressure at the midpoint between the two pulleys.
  6. Tighten the alternator adjustment bolt. Verify 1/4" (0.6) deflection in the belt.
  7. Reinstall the covers

How to Replace Alternator Belt on Stairmaster 4000PT Stepper

on Mar 10, 2015 | Stairmaster 4000PT Stepper

Tip

Alternator Belt Replacement for Stairmaster 4000PT Stepper


Stairmaster Stepper 4000PT Alternator Belt Replacement WARNING: The belts must be properly tensioned. A belt that is too loose will cause slow and sluggish operation. A belt that is too tight will cause excessive noise and belt wear.
  1. Remove side covers.
  2. Loosen the adjustment screw that mounts the alternator to the alternator brace and the pivot adjusting bolt that mounts the alternator to the frame.
  3. Pivot the alternator down and remove the belt.
  4. Make sure the is centered on the pulleys during installation.
  5. Pivot the alternator up or down as necessary to allow 1/4" (0.6 cm) of belt deflection with fingertop pressure at the midpoint between the two pulleys.
  6. Tighten the alternator adjustment bolt. Verify 1/4" (0.6) deflection in the belt.
  7. Reinstall the covers

How to Replace Alternator Belt on Stairmaster 4000PT Stepper

on Mar 10, 2015 | Stairmaster 4000PT Stepper

1 Answer

Stair stepper won't start


Wide Ride Pedal CTGID0 Stair stepper won't start

Dec 01, 2008 | Schwinn Wide Ride Pedal

1 Answer

Stair stepper won't start


Wide Ride Pedal CTGID0 Stair stepper won't start

Dec 01, 2008 | Schwinn Wide Ride Pedal

Tip

Alternator Belt Replacement for Stairmaster 4000PT Stepper


Stairmaster Stepper 4000PT Alternator Belt Replacement WARNING: The belts must be properly tensioned. A belt that is too loose will cause slow and sluggish operation. A belt that is too tight will cause excessive noise and belt wear.
  1. Remove side covers.
  2. Loosen the adjustment screw that mounts the alternator to the alternator brace and the pivot adjusting bolt that mounts the alternator to the frame.
  3. Pivot the alternator down and remove the belt.
  4. Make sure the is centered on the pulleys during installation.
  5. Pivot the alternator up or down as necessary to allow 1/4" (0.6 cm) of belt deflection with fingertop pressure at the midpoint between the two pulleys.
  6. Tighten the alternator adjustment bolt. Verify 1/4" (0.6) deflection in the belt.
  7. Reinstall the covers

How to Replace Alternator Belt on Stairmaster 4000PT Stepper

on Mar 10, 2015 | Stairmaster 4000PT Stepper

Tip

Alternator Belt Replacement for Stairmaster 4000PT Stepper


Stairmaster Stepper 4000PT Alternator Belt Replacement WARNING: The belts must be properly tensioned. A belt that is too loose will cause slow and sluggish operation. A belt that is too tight will cause excessive noise and belt wear.
  1. Remove side covers.
  2. Loosen the adjustment screw that mounts the alternator to the alternator brace and the pivot adjusting bolt that mounts the alternator to the frame.
  3. Pivot the alternator down and remove the belt.
  4. Make sure the is centered on the pulleys during installation.
  5. Pivot the alternator up or down as necessary to allow 1/4" (0.6 cm) of belt deflection with fingertop pressure at the midpoint between the two pulleys.
  6. Tighten the alternator adjustment bolt. Verify 1/4" (0.6) deflection in the belt.
  7. Reinstall the covers

How to Replace Alternator Belt on Stairmaster 4000PT Stepper

on Mar 10, 2015 | Stairmaster 4000PT Stepper

1 Answer

Stair stepper won't start


Wide Ride Pedal CTGID0 Stair stepper won't start

Dec 01, 2008 | Schwinn Wide Ride Pedal

Not finding what you are looking for?
Schwinn Wide Ride Pedal  Logo

Related Topics:

863 people viewed this question

Ask a Question

Usually answered in minutes!

Top Schwinn Exercise Bikes Experts

Matt Olenzek
Matt Olenzek

Level 2 Expert

286 Answers

Fordexpert

Level 3 Expert

5331 Answers

Ngoro
Ngoro

Level 3 Expert

1111 Answers

Are you a Schwinn Exercise Bike Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...