Question about Kenwood KDC-MP205 CD Player

2 Answers

Kenwood KDC-C717 - E-99 error

Today my Kenwood Auto Changer KDC-C717 gave me the E-99 error and now I can't eject the disc magazine anymore. When I press "eject" I only hear a "noise" but nothing happens.

The auto changer is connected to a Kenwood cario radio system KRC-758R

What can I do?

Posted by on

  • hrmario Jan 02, 2009

    i have the same problem

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 165 Answers

Reset the unit ithe reset button is on the cd changer

Posted on Mar 24, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

There is probably a jammed disc or disc holder. It cant eject the cartridge because the unit cant put the disc back into the cartridge to the left.

Took me a about 20 mins gentle persuasion after removing the plastic front (carefully depress the little plastic clips on the edges and (again, gently, lever the front off) and removing the metal case - half a dozen screws each side and remove the bottom. The top stays fixed to the workings. I could then get into the gap between the top case and workings but be careful not to pull the unit from the rubber antishock mountings etc. and remove the problem disc.

I removed the plastic fascia which surrounds the magazine hole too, not sure if it was necessary..!

Again - be careful not to be rough with it, you dont want to snap the plastic clips, etc and also check the horizontal/vertical adjusters are back on in the correct position if they come off.

Posted on May 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenwood 6 disc cd changer


screw needs to be replaced and making sure the bracket it not bent... thus , not allowing the cartridge to come out,,,

May 12, 2014 | Kenwood KDC-C465 6-Disc CD Changer

1 Answer

No power to the disc changer, how do I manually eject the magazine


There is a manual eject slot on the side of the CD changer. You will need a small flat head screwdriver or a pry tool to insert into the slot.

Oct 11, 2012 | Kenwood KDC-C715 10 Disc CD Changer

1 Answer

I have a kenwood kdc-c469 6 disc cd changer


try pacparts.com. they should be able to get you a price on a magazine.

Feb 16, 2010 | Kenwood KDC-C469 6-Disc CD Changer

1 Answer

Can't eject cd magazine - E-99 error message


I put a small pin in the reset button a few times and that then got the catridge to eject.

Apr 14, 2009 | Car Audio & Video

2 Answers

Can't eject cd magazine - E-99 error message


I had the same problem. I opened up the unit and found out that there is a plastic gear that moves the loader. When worn the loader can not load tha magazines nor change cd's. I replaced the gear and the cd autochanger worked fine.

Gerald,

Kenya.

Dec 01, 2008 | Kenwood KDC-C717 10-Disc CD Changer

1 Answer

CD Changer Not Working


sum have a small reset button where the mag is

Nov 26, 2007 | Kenwood KDC-MP3035 CD Player

1 Answer

Car cd changer


yes. open it up and find the small motor that performs the eject process. Then turn it by hand to eject the magazine.

Jun 13, 2007 | Kenwood KAC-729S Car Audio Amplifier

2 Answers

Kenwood KDC-2025 won't play CDs


source http://www.kenwood.nl/support/veelgestelde_vragen/ Changer Error Codes ? E-00: Poor Cable connection. ? E-01: Magazine not properly set in changer. ? E-02: No Disc in magazine. ? E-03: CD does not have selected track number. ? E-04: Disc is dirty, upside down or unreadable. ^^^^ ? E-10: No data is recorded on the MD. The player plays the next disc automatically. ? E-99: Changer malfunction, disc may be caught in machine or changer requires service. I suggest the lens needs a clean, or someone has dropped it and broken the delicate lens mech. Luck

Apr 30, 2007 | Kenwood KDC-2025 CD Player

2 Answers

Cd will not play and keeps ejecting


source http://www.kenwood.nl/support/veelgestelde_vragen/ Changer Error Codes ? E-00: Poor Cable connection. ? E-01: Magazine not properly set in changer. ? E-02: No Disc in magazine. ? E-03: CD does not have selected track number. ? E-04: Disc is dirty, upside down or unreadable. ? E-10: No data is recorded on the MD. The player plays the next disc automatically. ? E-99: Changer malfunction, disc may be caught in machine or changer requires service. Sounds like the mech is gummed up, jammed, or a cd is stuck inside. Get a nerd to open it up and check it over. Luck

Jan 14, 2007 | Kenwood KDC-3027A CD Player

Not finding what you are looking for?
Kenwood KDC-MP205 CD Player Logo

3,015 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4981 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Marvin
Marvin

Level 3 Expert

81423 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...