- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This is how to hook up the Pyle PLCM7300BT: On the license plate camera, plug the black cable provided with 2-wires inside (one red and one black) to its counterpart on the camera. On the open end of this black cable, strip and connect the black wire to the car/truck metal body part. Connect the red wire from the camera and the green wire from the monitor (part of the big black cable from the monitor) to the power wire to the back-up lamp socket. Connect the Red wire from the monitor to a switched terminal on the fuse box so that it would only have power when you have the ignition key on. The rest of the wiring is simple and common sense. To operate, turn on the ignition of you car/truck and put it on reverse you should see the camera view. Put the car/truck on Park, the monitor screen should go back, if not, push the power button once. To set up the blue tooth: Push the power button on the monitor so that you can see the blue screen and "no Input". Put your phone on discoverable mode and push scan for device. AT the same time push the "pair" button on the monitor.
I did all the figuring out on the bench using a 12 VDC power supplies and contact switches to make sure I understood how it worked. Once installed on my 1988 Suburban, it worked as expected.
The only problem I had to patch the long green wire (reverse car) so that it reached the back-up light socket.
Let me know if you still have problems. Email me at firstname.lastname@example.org
CHECK YOUR WIRES AT THE HARNESS WITH A TEST LIGHT TO BE SURE YOUR GETTING POWER TO THE HARNESS.AND A GROUND AS WELL. ANOTHER WAY TO CHECK IS TAKE THE UNIT OUT AND CONNECT DIRECT TO THE BATTERY UNDER THE HOOD
THE WIRING MAY HAVE BEEN ALTERED DURING THE TROUBLESHOOTING PROCESS. THE TV WORKS LIKE THE RADIO IN THAT IT HAS A MEMORY WIRE AND A TURN ON WIRE. IF THE WIRES ARE WRONG THE UNIT WON'T REMEMBER TO STAY OFF WHEN THE KEY IS TURNED ON. ALSO CHECK THE MENU FOR THE OPTION TO CONTROL THIS FEATURE BEFORE U RETURN TO THE SHOP. CHECK THE MENU FOR AN OPTION THAT CONTROLS IGNITION KEY AUTO ON/OFF TYPE FUNCTION. THE TV'S SETTINGS MAY HAVE BEEN RESET WHEN UNIT LOST POWER