Question about Lexmark E350d Laser Printer

2 Answers

We have replaced the photoconductor kit on the Lexmark e352dn as instructed. First the printer would not recognise it. Now the printer seems to have locked and will not show menus or respond to any of the buttons. Done all the usual things like turn off, unplug etc.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Printers recognize things by chips. These chips are not installed in the printer but on the utillities you use. There is no chip on this photoconductor. Therefor there is something wrong with the installation of the photoconductor. Maybe it needs a little AND GENTLE (above all) push to come in place. Then everything should work all right

Posted on Dec 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I replaced my photoconductor and now my printer won't print. The toner button and ! button flash.


The photoconductor kit's drum is full and needs replacing. The printer will not print any more pages until the photoconductor kit is replaced.

Click on the link http://bit.ly/oD75Kw to see instructions on to replace photoconductor.

For further assistance, please contact Lexmark Technical Support

Jun 06, 2011 | Lexmark E232 Laser Printer

1 Answer

2 buttons of the lexmarkE260D are glowing> the


The light is second to the right is Toner Low. If ! and toner low displays a flashing light it means that the photoconductor kit is full and must be replaced. The printer will not print any more pages until the photoconductor kit is replaced.


Press and release Continue button to print a photoconductor kit instruction page. If the light is still blinking, replace the photoconductor kit.

For further assistance, please call Lexmark Technical Support.

Apr 12, 2011 | Lexmark E260D - QTY 4 - LMB OFFER Laser...

1 Answer

Lexmark E450dn Error msg 84 Replace Photoconductor Photoconductor has been replaced same error msg. Is there something else to look for?


No, if you changed the photoconductor kit, then you just need to reset the maintenace count for the PE Kit.

Please follow this hyperlink to the specific instructions you need on Lexmarks web site.

http://support.lexmark.com/index?page=content&id=HO3155&locale=EN&userlocale=EN

they are easy to follow directions and you should have no problems.

Thanks

Jan 10, 2011 | Lexmark E450dn Laser Printer

1 Answer

It show 84 replace photoconductor


84 replace photoconductor on the display indicates that the photoconductor has reached its expected life rating. You may continue to print but will be at risk for developing print quality issues. It is recommended that photoconductor unit be replaced. After replacing a photoconductor unit, you will also need to manually reset the PC counter, Thanks

Sep 22, 2010 | Lexmark Lemark E352DN Laser Printer

1 Answer

How do I install a Lexmark E352DN Photoconductor


Here's an article on How to Change the Photoconductor Unit/Kit on a Lexmark E250d(n), E350d, E352dn, or E450dn Printer. Just click on this link: http://bit.ly/aykTXL. This should give you an idea on how to install the photoconductor unit in the Lexmark E352dn printer.

NOTE: If you are replacing your old photoconductor unit with a new one, after installing it you will need to reset the photoconductor counter as well.

Aug 12, 2010 | Lexmark E 352dn Mono Laser Printer

1 Answer

Reset fotoconductor lexmark e352dn


NOTE: Resetting the photoconductor counter/page counter should only be done whenever you replace the photoconductor unit.
Here's an article in the Lexmark website on how to reset the photoconductor page count. Just click on this link: http://bit.ly/9WAvUK. Hope this helps.

Aug 04, 2010 | Lexmark Lemark E352DN Laser Printer

1 Answer

Code 84 Replace Photoconductor


put back your old drum and let me know what gos on thanks

Nov 18, 2009 | Lexmark E352dn Laser Printer

1 Answer

It show 84 replace photoconductor


I have problem in lexmark X340 , when I give any print command occur problem paper jam with this message error " 201.02 paper jam remove cartridge "
note: I am test sensor but not problem

Jul 07, 2009 | Lexmark Lemark E352DN Laser Printer

Not finding what you are looking for?
Lexmark E350d Laser Printer Logo

1,041 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...