Question about Logitech QuickCam Fusion 961403-0403 Webcam

1 Answer

Need to disconnect power and reconnect to enter computer

I installed quick cam fusion. now when i try to turn on computer i get as far as main dell comp. screen. if i remove power to harddrive and replug i get in,help!

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Disconnect the camera from the USB port and it should boot up. Then,
Normal 0

Leave the Camera disconnected from the USB port and reinstall the CD or Downloaded software program. When the program asks you to connect the camera to the USB port, do so and it should work.
Then to use it on the Web do this.
Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.
A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/ ) set it up as follows:

  1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if Installed Properly will come up and show a video picture.
  4. Then, on the bottom of the page click on Save.
The camera and audio should function properly. Your friends and Family will now be able to see and her to you.
B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.html ) set it up as follows:
  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.
C. Windows Live Messenger:
  1. After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
  2. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.” And then click on “Show the Menu Bar”.
  3. Next go to the Menu Bar on right side, click on “ “Action.”
  4. Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud


Posted on Feb 01, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Dell latitude d600 setup screen


First - re-seat the hard disk and reboot the computer. If the computer does not boot up then reboot and go into the BIOS configuration to see if the BIOS detects the hard drive. If it doesn't detect the hard drive then it could be faulty.
Then the hard drive needs to be replaced in the computer/laptop, Windows installed and the computer or laptop's device drivers plus your programs etc. to get a functioning computer/laptop again.

May 11, 2013 | Computers & Internet

1 Answer

( Dell xps m1530 laptop ) Monitor blank, powers up but screen won't come on.


It ISN'T the LCD screen. Since you diagnosed with an external VGA monitor, you now know the problem is the laptop.

(When you connect an external VGA monitor to a laptop, you are bypassing the Video Cable, and LCD screen. You are connected directly to the laptop )

The basic Windows files aren't being found. The boot files. This may mean a bad Harddrive.

Do you have the Restoration CD Disk? Laptop on insert it into the optical drive tray, close the tray.
When asked choose - Repair. (Non-Destructive Installation)

If a checkdisk is done, you have bad sectors on the harddrive.
There IS a special procedure in replacing a harddrive.

[ More information on Harddrives,

http://computer.howstuffworks.com/hard-disk.htm ]

Regards,
joecoolvette

Feb 26, 2012 | Dell XPS M1530 Laptop

1 Answer

Burnt connector inside dell inspiron, first connector at motherboard (after power box) Can I fix it?? If so, can u help??


LOVE your user name!

I'll try to guide you the best that I can.
Sorry, first connector after Power Supply does me no good.

Let's look at a basic schematic of the motherboard for a Dell Inspiron 530s Desktop PC,

Dell Support > Inspiron 530s Desktop PC > Dell Inspiron 530s Series Owners Manual,

http://support.dell.com/support/edocs/systems/insp530s/en/OM/HTML/index.htm

I would like you to click on - Removing and Installing Parts
In the left column click on - System Board Components
{System Board = Motherboard }

This is a basic view of the motherboard with No hardware components installed.
It is also how the motherboard sits in your computer.

This is a pictorial view of the motherboard,

http://www.amazon.com/Dell-Motherboard-Inspiron-Systems-Compatible/dp/B003CO0WQS

Now, compare the Dell Support motherboard illustration, to the pictorial.
Looking to the far right in the illustration, the first connector is marked with the number 8.

On the pictorial it is the rectangular Black connector at the bottom/middle. (Next to the rectangular White connector)

This connector is for a Floppy Drive.
Is this the connector in question?

Is it the white rectangular connector next to it?
This connector is for the main power cable coming from the Power Supply.
In the illustration is is marked by the number 7.

This is a basic example, of the power cable coming from the Power Supply (power box), that connects to the white connector,

http://www.playtool.com/pages/psuconnectors/connectors.html#atxmain24

{Note* Color of the main power cable's connector does not matter. It can be any color }

IF this connector on the motherboard is burnt, you may wish to stop.
Electricity has more than likely fried the entire motherboard. May also include the Processor, Ram Memory, Harddrive, and a graphics card, if installed.

I know. I'm a 'ray of sunshine'.

How could this connector be burnt?
Four ways I know of;

1) Lightning storm, or power outage. Also could have happened if the power utility company was doing some changes in the power lines, utility pole transformer, etc.
(No. The utility company cannot be held responsible. I don't agree with that)

2) Power cable was not plugged in tightly. Lock on side was not locked into place.
Air gap created in-between the connecting contacts in the power cable connector, and the motherboard connector, created resistance.

Resistance creates heat. Burnt connector/s will result, and perhaps worse.
{Could also create a small power surge }

3) At one time Dell was a Proprietary computer manufacturer.
This means Dell wanted THEIR replacement parts used on THEIR computers.

If an aftermarket computer component is installed, Dell cannot warranty their computer.
Using THEIR parts in THEIR computers, Dell could.
However Dell computer users did not wish to pay the price of the Dell replacement parts.
The aftermarket parts were cheaper, of good quality, and readily available.

If we use a Power Supply for an example;

Dell had the motherboard manufacturer switch the socket holes around, in the Motherboard connector, for the main power cable.

They also had the Power Supply manufacturer switch the pins around, in the 24-pin ATX main power cable's connector, to match.

The aftermarket power supply manufacturer built the power cables, and connectors, to follow industry standards. Dell did not.

This means if you plug an aftermarket power supply's main power cable, into a Dell motherboard that was built proprietary, the motherboard usually fried. The only sign may be a burnt connector on the motherboard.

Could also have fried the Processor, Ram Memory, Harddrive, optical drive/s, and a graphics card, IF installed.

[ Looking at the Playtool link again, look at the photo to the far right.
See the different colored wires?
The color coding indicates what the wire carries as far as Voltage, or if it is a Ground wire.

1) Orange insulated wires = 3.3 Volts
2) Red wires = 5 Volts
3) Yellow wires = 12 Volts
(All are DC. In comparison two D cell flashlight batteries produce 3 Volts DC)

4) The Black wires are Ground wires

(The Green wire is the Soft Power On wire. Abbreviated as PS_ON)

The Orange, Red, and Yellow wires are power wires.
The Black wires are Ground wires.
Guess what happens if a 12 Volt wire is connected to a Ground?
(Instead of going to a 12 Volt connection)

Things start frying.

{To state connections in the main power cable connector, and it's respective connector on the motherboard, correctly;

Looking at the middle photo you see the connection end of the main power cable.
Plastic connector with individual plastic rectangular shapes, that have metal 'tubes' inside each of them.

The motherboard connector has socket holes to match the individual plastic rectangular shapes.
Inside the socket holes are metal pins. Contact pins.
The contact pins go inside the metal 'tubes'.

The metal 'tube' is a Molex Socket Terminal,

http://www.mouser.com/ProductDetail/Molex/36664-0002/?qs=sGAEpiMZZMvz8LftK4jerhl0r50z%252bUNRzFCdHbJqUTU%3d


4) IF the Power Supply, ( looking at it from the Back of the computer), has a rocker switch, or slide switch, to set the incoming AC power to 110 Volts, or 220 Volts;
And the power supply switch was set to 110, and plugged into 220 Volts,
the motherboard connector would fry.

Plus the Power Supply. May also of course include Processor, Ram Memory, Motherboard, Harddrive, optical drive/s, and graphics card IF installed.


Replace the connector? No
Could be;
A) Replace the Power Supply. Still no?
B) Replace the Motherboard. Still no?
C) Replace the Ram Memory. Still no?
D) Replace the Processor. Computer operates but no graphics?
E) Graphics card installed? Replace graphics card

Unless you can test each individual component, and the cost is not much less, or equal to a new computer, the obvious choice would be to purchase a new, or good used computer.

Nov 01, 2011 | Dell Inspiron 530s Desktop Computer

1 Answer

The screen not show noting when pc notebook turn on.


Power drain would be a better solution in this case.
1.first shut down the comp
2.unplug the charger
3. remove the battery
and after press and hold the power button for 60 seconds without any charger and the battery.After the 60 seconds replug the battery and the charger and turn the computer

Aug 28, 2010 | HP Computers & Internet

1 Answer

Computer is frozen


Power drain would be a better solution in this case.
1.first shut down the comp
2.unplug the charger
3. remove the battery
and after press and hold the power button for 60 seconds without any charger and the battery.After the 60 seconds replug the battery and the charger and turn the computer .

Jun 10, 2010 | HP Pavilion DV6700T Notebook

1 Answer

Sometimes won't open and can't import my pictures


The lens won't open or the comp. won't read the cam?
If it is on the cam:

Make sure that you are installing a fresh/ full charge battery
Remove the battery
Clean the metal contacts on the battery using a clean cloth

Pls test with an alt. batt.
If you do not have access to a dif. battery.
Pls. take the batt out of the camera. Insert the charger into the unit from the main socket and turn the camera on. If the camera works you will need to replace the batt. If not you will need to order a No power repair.

Does the blue screen apear on the cam or the computer?
If on the cam:

Reset the cam: Take the batt out for longer than 10 sec.
Exchange the SD card.

Contact KODAK:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

Nov 11, 2009 | Kodak Easyshare 1725043 M893Is Digital...

1 Answer

My monitor turns on for a split second when I turn the power on, then goes to a black screen. I've tried to reboot it and it does the same thing. What do I need to do?


Power drain would be a better solution in this case.
1.first shut down the comp
2.unplug the charger
3. remove the battery
and after press and hold the power button for 60 seconds without any charger and the battery.After the 60 seconds replug the battery and the charger and turn the computer

Nov 05, 2009 | Computers & Internet

1 Answer

Comp doesn't power anything


It's likely to be these four main culprits:

Video Card / GPU

Memory

Motherboard

CPU

Start by opening up the case (with the power removed of course) and try removing and reseating your video card and memory sticks.

Then restart the computer.

If nothing changes, try removing the bios battery with the computer unplugged for about five minutes then put it back.

If those don't work then it's probably a motherboard problem, but if you get any beeps messages or anything else changes, let me know and I'll throw some ideas your way.

Feb 24, 2009 | Dell Dimension 3000 PC Desktop

1 Answer

I have two dell computers. A dell Optima GX270 with an 80 Gig harddrive (that is my primary business computer) and a Dimension E310 P4 with an 80 Gig harddrive with a hidden reserve harddrive. The Optima...


To know which is which all you need to is look on the harddrive to the back where the jacks go when you remove the jacks you will see a little plastic jack on two pins you can remove the jack to make the harddrive reserve once you remove this jack the hardddrive is know longer the main one.If you any problems please let me know thank you. (rate me)

Jan 13, 2009 | Dell Dimension E310 PC Desktop

1 Answer

Is a new installation needed?


The quickcam software is about 5-7mb, the fusion is about 11-15mb.

Fusion for Vista supports 30 frames per second (4X faster than a quick cam)

goto this link and download upgrades etc, choose the OS etc.

Mar 26, 2008 | Logitech QuickCam Fusion Webcam

Not finding what you are looking for?
Logitech QuickCam Fusion 961403-0403 Webcam Logo

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Computers & Internet Experts

micky dee

Level 3 Expert

2983 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Logitech Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...