- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It could be that some other wireless device has the same IP address as the Zyxel AP. If you have not changed the Zyxel's default IP address 192.168.1.2 , I would recommend it. Try something like 192.168.1.100
Hers the link to the manual:
Your IP address 192.168.1.2 is a Local IP address. Local(Computer) IP address ranges from 10.0.0.0 to 10.255.255.255, 172.16.0.0 to 172.31.255.255, 192.168.0.0 to 192.168.255.255. Normally you can login the Local IP address within a single building (or) campus using LAN. If you need to access around the world, it should be a Public(Network) IP address. To check your Network IP address, visit IP-details.com .
If you forgot your username and password to any wireless router, the normal procedure is to do a factory reset. This means it will set the router back to the way it was the day you bought it. Warning: this will forget all the configuration you have done and you will need to reconfigure. If you don't know how to reconfigure then I don't recommend this.
To do this there is a RESET button on the side of the router. Hold it for 10 seconds or until one of the LED lights turns red. Release the reset button and if the SYS LED light begins to blink the defaults have been restored and ZyAir will restart.
If this doesn't work you have a second option
Turn off the ZyXel ZyAir B-3000, then while holding the RESET button turn the ZyAir back on. Continue holding the RESET button. The SYS Led light will begin to flicker and blink rapidly for 20 seconds. Release the RESET button and the ZyAir will restart. Wait for it to restart.
The factory password for the ZyAir B-3000 is 1234
Click here http://192.168.1.2 and type in the 1234 password and click LOGIN. You will probably see a screen to change your password. I recommend you do this.
You will need to reconfigure the router
As I said before change the password from 1234 to something else, plus If there is no security after the factory reset I would read the manual (see below) and setup at WPA or WPA-PSK security on the wireless router (I do not recommend WEP security it is too easy to crack).
You can find the ZyXel ZyAir B-3000 manual here: ftp://ftp.zyxel.com/B-3000/user_guide/B-3000_3.50.pdf
and the ZyXel ZyAir B-3000 quick start guide here: ftp://ftp.zyxel.com/B-3000/quick_start_guide/B-3000_.pdf