Question about Zenith XBS344 System

1 Answer

Static/White Noise After selecting Progressive Scan option accidentally, I pressed the stop button on my remote for 5 seconds to reset. However, this time there are no speaker test options in the setup menu as well as there is static or white noise if anything other than the DVD function is selected. If I want to play any games or listen to the TV through the speakers nothing but static. Please help! Thanks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Static/White Noise

Scroll down to the speaker set option. activate it then push the > button. You will see the test below the speaker diagram.

Posted on Feb 11, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Why do my tv screen appears in three sections when i put a dvd disc? it appears normal when i put a vcd!

check is your tv supports progressive scan, if not switch off the progressive scan mode on your sony home theater system.

For switching off the progressive scan mode do the following in ur home theater's remote.

Do this setting if your connected the component video

1. Press the FUNCTION BUTTON on the remote.
2.Press the VIDEO FORMATE button to select interlace scanning.

If you are connected the HDMI then do the following setting

1. Press the FUNCTION BUTTON on the remote.
2.Press the VIDEO FORMATE button to select the resolution
Select 720 * 480p

Jan 17, 2011 | Sony BRAVIA DAV-HDX267W Theater System...


Bose LifeStyle 48 Video Mode

Bose LifeStyle 48 System Video Mode Change


Follow these steps to change the video setting from European to North American:

With the media center turned off, use the controls on its front panel to follow these steps:
  1. Press and hold the Enter button on the media center.
  2. While holding the Enter button down, press the Store button. Selections will appear on the media center display each time you press Store.
  3. When Video appears as the selection on the display, release the Store and Enter buttons.
  4. Use the Volume up and down buttons to scroll through the Video options.
  5. Stop scrolling at the proper selection:
  • For a component connection only, select:
  • -NTSC COMPONENT (in N. America)
  • -PAL COMPONENT (outside North America)
  • For a component connection and progressive scan, select NTSC PROGRESSIVE.
6. With the proper selection made, press Store to confirm the
selection and leave the Video options.

I hope that helps.
Bose LifeStyle 48 Manual Download
Reset Bose LifeStyle 48 VChip Password

on May 02, 2010 | Bose Lifestyle 48 System

1 Answer

I want to set up my dav-fr10w to 'interlace' option so i can play the dvd's on my tv, but it's set to 'progressive' right now and the instruction manual doesn't give the specific information to change it....

To cancel Progressive scan output or to change output to interlace signal format, follow these steps..

1- Select DVD by pressing Function button on unit.
2- While holding down |<< (review) button, press Function button on unit.

This will change output signal to interlace/ composite video output from yellow pin/ S-Video.
Hope this info will help you.

Feb 05, 2010 | Sony DAV-FR10W System

2 Answers

I cannot get video picture,But ican hear all audio functions.

put a disc in the player and once it starts to play press stop, then press and hold the stop button for 5 seconds this will turn off the progressive scan feature.

Apr 26, 2009 | Zenith DVT412 System

2 Answers

I accidently hit the progressive scan button and now I can't get a picture when I try to watch a dvd.

just talked to LG Customer support and got them to send me a manual.

to turn off the progressive scan insert a disk and once it starts playing press stop, then press stop again and hold for 5 seconds this will turn off the progressive scan mode.

Dec 09, 2008 | Zenith DVT412 System

1 Answer

Progressive Scan Mode

Check for video out in the dvd setup menu, and set it for composite,
It may be set for component.

another thing to try is setting the the progressive scan option off in the setup menu, you wont benefit from it, but at least it might work.
if you already tried using the prog scan and your T.V isnt compatible, you'll need to reset. press stop to stop any playing disc, and press stop again holding it for 5 seconds to reset the system.

good luck!

Jan 29, 2008 | Zenith XBS344 System

1 Answer

Want to cancell progressive scan settings

Hello fiddlehead,

Well, here is the procedure to reset the SC-HT440 . While unit is powered and stopped, select “DVD/CD” as the source. Press and hold [■] (Stop) button on the main unit and [≥10] key on the remote control until “Initialized” disappears from the television. Turn the unit off and on again. All settings will return to the default values.
Since you mention that you can not see the menu on your TV's screen, then you won't be able to see the "initialized" disappear, so, give it a second try if the first fails or press and hold the keys for a little longer.
Let me know how this works for you.


Jan 02, 2008 | Panasonic SC-HT440 System

5 Answers

Progressive scan mode will not disable

Hi, you must hold 1st remove the disc (if you have one in) then hold down the STOP which is just under the RECORD button. Hold it for about 6 to 8 seconds. That should clear it.

Good luck

Dec 09, 2007 | Zenith ZHX-313 System

2 Answers

Stuck in progressive scan mode

You need to be sure to remove the discs from the disc changer and close the disc changer. Make sure that your TV is on the Blue Screen and it should say " Progressive Scan Mode" Press and hold the stop button on the unit....not the remote for 5 seconds or more and it should reset. However, if your TV is a Progressive Scan compatible TV, you may need to refer to the user guide for the TV as well....Many newer TVs Use a Progressive Scan Setup, but this solution should still work for you. Make sure all discs are removed FIRST!!!

Aug 29, 2006 | NexxTech ESDVD100 System

4 Answers

Progressive Scan

you'll need to reset. press stop to stop any playing disc, and press stop again holding it for 5 seconds to reset the system.
works with remote only
While Disc is Running,
By using remote control,
Press Stop Button once to stop the disc (Stop in Memory Mode)
Press Stop Button once again to go into Full Stop
Then, Press & Hold Stop Button for 5 Second or So.


Jan 21, 2006 | Zenith XBS444 System

Not finding what you are looking for?
Zenith XBS344 System Logo

Related Topics:

164 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zenith Home Theater Systems Experts


Level 3 Expert

56580 Answers


Level 2 Expert

150 Answers


Level 3 Expert

6993 Answers

Are you a Zenith Home Theater System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides