Question about Samsung T240HD 24 in. LCD TV

1 Answer

Sony T240HD monitor TV

Brand new.  Plugged it into wall and hooked up red, white, and yellow cables.  Hooked up sony playstation II and everything is working except the fact that the picture is black and white.  No color.  Tried all possible combinations with the red, yellow, and white cables but still no color.  Remote menu is in color and I adjusted tint, picture, resolution, and everything else but still no color. Help

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 61 Answers

Make sure that the plug on ps2 is connected and check the settings on tv and the settings on ps2 browser are correct if possible check ps2 on another tv to be sure of it's settings if the ps2 works the check channel setting on tv make sure it's not in pal setting it should be ntsc and also check the antenna setting make sure it might be set to cable and also check cables of any sharp kinks your problem is with the yellow cable red and white is the sound

Posted on Dec 01, 2008

  • everythin177 Sep 20, 2010

    I have this tv too. The problem you have is that the T240HD does not have a composite input. The input you are using is actually a component input. The only way to hook a ps2 up to your tv is to buy a component cable. You can find these at gaming stores. (Regular component cables will not work)

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I Have my RCA CABLE HOOKED UP INTO MY TV I HAVE A PICTURE HOWEVER I DON'T HAVE ANY VOLUME AT ALL


How do you have it hooked up? RCA cables, HDMI, DVI, etc...
If you're using RCA cables (usually red, yellow, and white) check and make sure that the audio cables (red and white) are plugged into the correct sockets with corresponding colors. If you have properly connected the cables and your issue persists, then you might have faulty wires (might have a pinch which could have broken the wire through the inside) try again with different wires and see if it works. if it still doesn't work try pluging your RCA cables on different sockets (TVs usually have more than one component sockets)...make sure your red and white wires are on the same component # as the yellow wire.

Feb 16, 2014 | Emerson LC391EM3 39 in. LCD HDTV

1 Answer

I just hooked up my Flat TV to my Panasonic VHS-DVD recorder player and the screen only shows blurry Black and White when displaying or recording, The TV itself is fine.


Sounds as if you hooked up your player wrong. If you are using a composite hook up. You should have a yellow, red and white cable. Make sure it gets hooked into the same on the TV. If it is a component connection, then RED, Green and Blue. It sounds like you have your Yellow composite going through your Green component. If by chance your TV is a new Sony, then you might have to go into the user menu and turn component off and composite on.

Apr 05, 2011 | Flat Panel Televisions

1 Answer

I hooked up my dvd player to the tv, but have no sound


have you hooked the yellow to yellow and the red to red and the white to white that should fix your issue

Jan 02, 2011 | Sony KDL32BX300 32 in. TV

1 Answer

We just bought a new 32" panasonic led tv. Hooked everything up and works fine with normal television broadcast. However, we have a Sony DVD/VHS combo hooked up that doesn't perform well. When we play...


If you are using the composite cables (RWY) make sure the red and white are plugged into the audio jacks and NOT the component cable plugs (RGB.) If you have the red audio cable plugged into the red component plug this will cause issues, especially with the sound.

Aug 10, 2010 | Panasonic Flat Panel Televisions

1 Answer

How can I connect my VCR and DVD to my LCD tv? Thank you in advance. I just need to connect the two to my tv. VCR is a


i would run composite video (yellow, white, red ) cables
just find the jacks labeled "output" on the dvd or vcr
match the colors to the jacks labeled "input" on the tv.
once hooked up, push tv/video or input on the tv remote to flip to the correct input you plugged the device in to.

Jun 01, 2010 | Sony Bravia KDL-46V4100 46 in. LCD HDTV

1 Answer

When I connect my Wii it only shows up in black and White.


If you are using the original component cable that has the Red, White and Yellow you need to purchase a Wii Component Video Cable.This cable is compatible and will solve your problem it will have a Red,White - Red, Green, Blue that will match the component Cable input on the back of your T240 HD Monitor.

Jan 02, 2010 | Samsung T240HD 24 in. LCD TV

1 Answer

55HDX99 TV with Sony DAV-HDX500


Connect RCA Red-White audio cable to INPUT of DAV-HDX500 and hook it to TV AUDIO OUT pins at back of TV.
Now select INPUT in DAV-HDX500 to get TV sound in Sony system speakers.

Apr 19, 2009 | Flat Panel Televisions

1 Answer

Humming from speakers


I need to know how you have your TV hooked up through the cable for ex. hdmi or the green blue red white and yellow cables that plug into the back if its not doing it through the ps3 or anything else means its not the TV its either a faulty cable box or the wires are bad or hooked up wrong going to the tv.. i would first check make sure all the colors are in the right color slots if thats how you have it hooked up and if thats all right then just email me back through the fixya website i am on every hr id be happy to further help you, and if you can please give me a rating it would be greatly appreciated...

Thanks,
Steve

Dec 29, 2008 | Sony Flat Panel Televisions

1 Answer

How to hook up video game to my lcd samsung 1080p


on the ps1, connect the cable that has the Red, White, and Yellow connections on one end to the black connection that looks flat (or both ends if you have the model with the Red, White, and Yellow connections on the back of the PS1).
connect the other end (red, white, yellow) to the TV with the same colors, on the same row. Note the input name (video 1,2... or aux 1,2...).

turn on the PS1. On the TV, change to the input name that you just connected the ps1 to.
you should see the ps1 menu.

Aug 24, 2008 | Flat Panel Televisions

Not finding what you are looking for?
Samsung T240HD 24 in. LCD TV Logo

464 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Flat Panel Televisions Experts

xxxxxx xxx

Level 3 Expert

4706 Answers

Steve McIntosh

Level 1 Expert

11 Answers

Boo to u

Level 1 Expert

28 Answers

Are you a Samsung Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...