Question about Samsung HCL652W 65" Rear Projection Television

Open Question

That sight only has the HCN653WX manual and I need the HCN653W.

What is the differance between the HCN653WX service manual and the HCN653W service manual?

Posted by on

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a samgung hcn653w. It has no picture, it sounds like it trying to turn on, but nothing on the screen. Any ideas?


If you here a whining sound when it is trying to turn on, then your colorwheel is bad and needs to be replaced.

May 17, 2012 | Samsung HCN653W 65" Rear Projection...

1 Answer

Picture is blurred with different colors, do I clean something?


the video ic is faulty have a repair tech repair your tv.good luck.

Sep 25, 2011 | Samsung HCN653W 65" Rear Projection...

1 Answer

All of a sudden my 6 yr old samsung HCN653W has a


your cable box is effecting the component line in 1 or 2 in the back of the tv

Jul 12, 2010 | Samsung HCN653W 65" Rear Projection...

1 Answer

The TV turns on and off after a few seconds and repeats itself.


There could be quite a few things that would cause the set not to power up. I dont have the service manual, however you can get a copy of the service manual at the following link for your model. As thats the only proper way to be able to check for the proper voltages to determine whats wrong with the set.
Heres the link.
http://servicemanuals.vstore.ca/

Nov 26, 2008 | Samsung HCL652W 65" Rear Projection...

1 Answer

Convergeance Board for HCN653W.


This is a very old post Do you do need Help?

Nov 13, 2008 | Samsung HCN653W 65" Rear Projection...

1 Answer

Placement of crt coils on HCN653W


unless you are real good at this you will be treading on thin ice you always have 1 as a reference
you replace or service 2 tubes then realign them to the reference once done you replace the third and align to the first 2. you never need to replace the coolant and it is only a job for an expert as a bad seal here will cause the coolant to leak out onto the neck and then down to the crt socket.. this will short out the high voltage and your troubles will have just begun. you will need to realign this from scratch now.

Oct 07, 2008 | Samsung HCN653W 65" Rear Projection...

1 Answer

Samsung HCN653WX has wavy lines and red and blue ghosting


The most likely cause is shorted convergence chips and possibly a few pico fuses.

These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets including Sony,Samsung,JVC,Philip Magnavox,Panasonic,Akai,Pioneer2_bing.gif Hitachi,Mitsubishi,Zenith and others.
You can get a convergenece repair kit with instructions from the links below.

Here are some of the most common problems with these sets...

Problem #1) Convergence

Yours may have one or more of the following symptoms...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2
Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

You can see some more examples and find a fix herebb0cf99.png http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Aug 13, 2008 | Samsung HCN653W 65" Rear Projection...

2 Answers

Please advise if you would be able to guide me as to where i could purchase tv parts...


Hello MMJB,
Here are the link to purchase your parts.
674e151.gifhttp://www.partstore.com/Part/MCM+Electronics/MCM/LA7845/New.aspx

183b00b.jpghttp://www.partstore.com/Part/Matsushita/JVC/TDA6111Q/New.aspx

4509847.jpghttp://www.partstore.com/Part/Samsung/Samsung/HCN653WX/Samsung/Samsung/0502001230/New.aspx


Best regards
circuitcity




Jul 09, 2008 | Samsung HCN653W 65" Rear Projection...

1 Answer

3d function...Samsung HCN653W


You need to replace both convergence ICs they are STK392-040 you can get replacement ICs at the following site and they will provide free instalation instructions with pictures so you can do the repair yourself. heres the link.
http://servicemanuals.vstore.ca/

Jun 05, 2008 | Samsung HCN653W 65" Rear Projection...

1 Answer

Reverse fisheye!!


you are going to need to replace the convergence board assembly. It is available at http://www.samsungparts.com/part_detail.asp?catalog%5Fname=Parts+and+Accessories&product%5Fid=BP95%2D00142P&search%5Fmodel=HCN653W. Also get the service manual, as you will need to do some touchup convergence and reset the perfect focus setup again If you have the technical ability. If you do, great! If you do not, these service menu alighnments can mess up your set, so take no shortcuts. Good Luck

Mar 29, 2007 | Samsung HCN653W 65" Rear Projection...

Not finding what you are looking for?
Samsung HCL652W 65" Rear Projection Television Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Projection Televisions Experts

The Wyzzyrd

Level 2 Expert

83 Answers

Donald Griswold
Donald Griswold

Level 1 Expert

8 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Samsung Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...