- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Things to clean:1. Little warm water & bowl2. tissue paper3. Ear budsDip cartridge nozzle part in water, wait 10 seconds, take out & swab nozzles with ear buds, clean with tissue paper as shown in fig.. check for the print quality.. repeat two or three times if required.. if no recovery better to replace the cartridge..
hp provides the cleaning software with the printer driver or software provided on disc you can clean the heads by that wizard at run that 3-4 times and then test print by that only and you will get the fine print outs blk&wht as well as coloured
Hi There A good clean up you may need to do this more than ones maybe. Summary Usage of compatible ink and leave the printer idle too long may cause printhead clogging What should you do if you get this problem. Relax; you may recover the printhead by unclogging it. Follow these steps to unclog the printhead 1.Right click in the printer driver name 2.Select Properties menu 3.Click Maintenance tab 4.Click on cleaning sign for regular cleaning. Perform this up to 3 times. 5.If this does not work, perform Deep Cleaning And if that not work Some times it needs a good clean up but this is up to you if you want to do this, But after you done this prime the printer so it gets the inks back in the heads, it may take a little time for the inks to work. Ok. There is fluid cleaner for this but I can never find any in the shops the only ones I seen is when they sell them in Tesco but they come in with the ink refill bottles so I just use worm water by it self on a cloth and dabbing on the heads to clean them, it will not harm the heads but not to much water. Some heads are on the inks them self but some have them inside the printer so I not know your printer so if the heads are inside you need to get them out you may find that some heads will just clip out put some need to be unscrewed so you got to know how they come out so be careful and not push to hard on them, if the heads are on the ink then it is a easy job to clean them, It worth a try it worked for me more than ones. Please all I ask is call back and just gave a vote, it will gave me some satisfaction to know am helping some one, so I will keep on helping.
All The Best: Pineworks
You have either a clogged colour print head or a non-functioning print cartridge (only one colour working). If the printer has separate cartridges for different colours (and black) you can do a partial swap, replacing the ones that have failed, but start by running the command CLEAN PRINT HEADS from the printer options or controller panel, and watch for the quality to improve. You may have to clean the heads two or three times. If no change in the quality after two flushes, replace the cartridges with new ones.