Question about Phones

1 Answer

Camera Hi there, My nokia n81 8gb camera not working. When i press on the camera button on the side of the phone it says (camera: feature not supported). It was working before. Can somebody help please... Thanks i got the exact same problem pls help my id seby_seby169 PLS HELP

Posted by on

  • seby_seby169 Dec 01, 2008

    my nokia old is 15-05-2008 and i don`t have install firware pls help

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

Have you tryd a nokia firware update and please tell me how old is you phone

Posted on Dec 01, 2008

  • sithh Dec 01, 2008

    ok do you live in the uk, if you do you will have 2year standard nokia warrenty and hears a link to get firware update http://www.nokia.co.uk/A4226014 but please let me know how you get on

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I don't know how this happened, but any button I touch automatically calls a specific phone number, even if I use the intercom... It seems that the phone has been programmed to dial this number by...


Hi Evygal,

There is nothing to worry about it because this phone supports a speed dialing feature , which means that you can program the numbers in a way that just pressing them in a specific way usually for some more time than a usual press of a button will automatically enable the speed dial function and the phone will call the number that has been programmed on the digit.

A good idea to not face this problem is to quickly remove the finger off the button when you press it , because keeping it for long , just as long as one sec can enable this speed dialing feature.

Hope that helps ..:) Let me know in case you have any queries, would love to help you.

Sep 12, 2011 | Nortel Meridian M7208 Corded Phone

3 Answers

How do i reprogram my speeddial numbers on jazz 4400?


Hello.

From NorStar Support:

To Program Personal Speed Dial Numbers: (Numbers 71 - 94 only.
1. Press the Feature button, then * 4
2. Enter the 2 digit code (71 - 94). that you want to assign to that phone number
3. Enter the telephone number, then press the OK softkey
4. Display will show: "Entry xx stored"

If the above doesn't work, try:

To Program Personal Speed Dial Numbers:
  1. Press [Feature] [*] [4]
  2. Enter a two-digit code from 71 to 94.
  3. Specify the external line by pressing a line button, a line pool button, or the intercom button. If you don't specify the external line, the system automatically chooses a line for the call.
  4. Dial the telephone number you want to program (up to 24 digits).
  5. Press [Hold].
  6. Record the code and number you have just programmed.
Hope this helps.

Feb 02, 2011 | NorStar Jazz Plus 4400 Corded Phone

1 Answer

How to turn on m7310 phone @ home.


Hi

To Turn On or Off Do Not Disturb:


1. Press the DND key or press the Feature button, then 85

2. To turn it off: Press the DND key or the Feature button, then #85

Thanks


Aug 12, 2010 | NorStar M7310 Corded Phone

1 Answer

While setting up speed dials, I press Feature *4, then "hold or release" shows up on the screen along with a beep.


Hi The code you need is Feature *1 for external calls, Feature *2 for internal calls Feature *3 for functions.

F*4 is 'Call Forward'

If you Press Feature *0 then press each button in turn it will show you what is under that key (Button)

If you are setting up external calls you may have to pre-fix every No; with a 9 . if you are in 'Pool Group' working.

Hope this helps

Aug 09, 2010 | NorStar T7208 Corded Phone

1 Answer

Our voicemail transfer button will not work for oneparticular phone.


More than likely although the button is marked as a transfer its not programmed as a transfer button. To see how its programmed press feature *0 (button inquiry) and press the button marked transfer. To re-program the button press feature *3, press the button marked transfer,and press feature 70. that willchange the program on that button.

Oct 13, 2009 | NorStar Meridian M7310 Phone

1 Answer

How to volume up the voice?


For the volume try adjusting the volume while you are on the line. As for the feature buttons press feature (star) * 0 then the desired buttons and it will tell that button's feature. If the volume still doesn't work pull the cord on the back of the phone to reboot the phone itself and try the same thing again.

May 21, 2009 | NorStar Meridian M5209 Display Phone

1 Answer

Unable to use conference button


Here are the instructions for making a conference call on a Norstar system.

Conference [Feature] [3]
  • Establish a conference call between yourself and two other parties.
    1. Make or answer the first call.
    2. Put the first call on hold.
    3. Make or answer the second call.
    4. After the second call is connected, press [Feature] [3].
    5. Press the line or intercom button of the first held call.
    6. Press [Rls] to end the conference call
  • To remove yourself from a conference permanently (unsupervised conference):
    • Press [Feature] [7] [0]. The other two callers remain connected. (Some external lines may not support this feature.)
  • To put a conference on hold:
    • Press [Hold]. The other two callers can still talk to each other.
  • To split a conference:
    • Press the line or intercom button of one caller to consult privately while the other caller is on hold. To re-establish the conference, press [Feature] [3].
  • To disconnect one party:
    • Press the line or intercom button of the caller you want to disconnect, then press [Rls].
    • Press the line or intercom button of the remaining caller to resume your conversation.
  • To independently hold two calls:
    • Press the line or intercom button of the first caller, then press [Hold]. The second caller is automatically put on hold. To re-establish the conference, retrieve one call from hold, press [Feature] [3], then retrieve the second call from hold.

Mar 11, 2009 | Nortel Meridian M7208 Corded Phone

1 Answer

I do not have manual for jabra bt160 how do i connect to phone


Wear it how you like it 4
5
English
The Jabra BT160 is ready to wear on your right ear. If you prefer the left, gently flip and
rotate the earhook 180°. (See fig. 2 )
For optimal performance,wear the Jabra BT160 and your mobile phone on the same side
of your body or within line of sight.In general,you will get better performance when
there are no obstructions between your headset and your mobile phone.(See fig.5 )
Answer a call
Tap the answer/eend button on your headset to answer a call
End a call
Tap the answer/eend button to end an active call
Reject a call (DDependent on your phone supporting this feature)
Press the answer/eend button when the phone rings to reject an incoming call.
Depending on your phone settings, the person who called you will either be
forwarded to your voice mail or hear a busy signal
Make a call
• When you make a call from your mobile phone, the call will (ssubject to phone
settings) automatically transfer to your headset
Activate voice dialing (DDependent on your phone supporting this feature)
Tap the answer/eend button. For best results, record the voice-dialing tag through
your headset. Please consult your phone ’ s user manual for more information about
using this feature
Redial last number (DDependent on your phone supporting this feature)
Press the answer/eend button
Adjust sound and volume
Press the volume up or down (+or – ) to adjust the volume (See fig. 1 )
How to...5
Before you use your Jabra BT160, you need to pair it with your mobile phone.
1. Put the headset in pairing 2 mode
Make sure that the headset is on.
Press the answer/eend button and press the volume up (+) button at the same time,
until a solid blue light comes on.
2. Set your Bluetooth phone to ‘ discover ’ the Jabra BT160
Follow your phone ’ s instruction guide. This usually involves going to a ‘ setup,’
‘ connect ’ or ‘B luetooth ’ menu on your phone and selecting the option to ‘ discover ’
or ‘ add ’ a Bluetooth device.** (See example from a typical mobile phone in fig. 4 )
Pair it with your phone 3
4
English
Turn on your headset 2
Press the answer/eend button to turn on your headset
Press and hold the answer/eend button to turn off your headset
Charge your headset
Make sure that your Jabra BT160 headset is fully charged before you start using it. Use
the AC adaptor to charge from a power socket. Connect your headset as shown in fig. 3.
When the LED is solid blue, your headset is charging. When the solid blue LED turns off,
it is fully charged.
1
The Jabra BT160 is easy to operate. The answer/eend button on the headset performs
different functions depending on how long you press it.
Instruction:Duration of press:
Tap Press briefly
Press Approx: 1 second
Press and hold Approx: 5 seconds
Getting started
3. Your phone will find the Jabra BT160
Your phone then asks if you want to pair with it. Accept by pressing ‘ Yes ’ or ‘ OK ’ on
the phone and confirm with the passkey or PIN 3 = 0000 (44 zeros).
Your phone will confirm when pairing is complete. In case of unsuccessful pairing,
repeat steps 1 to 3.

http://www.jabra.com/Sites/Jabra/UK-uk/support/Pages/JabraBT160.aspx

It is all in there www.jabra.com

ARTGIRL

Jul 18, 2008 | Phones

1 Answer

Not working


Astonishingly, assignment of announcement to phone line is not documented in the user manual. Tech support was totally worthless concerning this issue. I had to discover it by trial and error. To assign an announcement to a specific phone line do the following:
1) Record your announcement message for a, b, c, ao, etc. as documented
2) Press program
3) Keep pressing the feature button until ANNC appear at the bottom of screen, line 1 appears at the top, and the letter 'a' appears in the middle.
4) Choose the announcement to be assigned to Line 1 by pressing the select button
5) Press the feature button again. Line 2 appears in the display.
6) Repeat step 4 to select the announcement to be assigned to Line 2.
7) Press program button, or take phone off-hook to end the sequence.

Shame on AT&T for such shoddy documentation, and lack of support for their products!

Nov 09, 2007 | Lucent 1872 Corded Phone

5 Answers

Flashing feature button


Jennifer, if it is a CallBack Request, it will be cleared when you speak with the extension that set it. You can press SPEAKER - "#" to call them back (default setting).
If the phone is in CFWD ALL, clear it by pressing SPEAKER - "42"

Oct 18, 2007 | NEC Electra Elite DTU 16D-2 Corded Phone

Not finding what you are looking for?
Phones Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Phones Experts

kakima

Level 3 Expert

96738 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4762 Answers

Are you a Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...