Question about Panasonic NV-GS10 Mini DV Digital Camcorder

1 Answer

Camcoder (Panasonic PV-GS15) does not play back recording

My camcoder is 4 yr old. It was working fine, recently it stopped playing back recorded video. When I select play mode, it displays blue screen with time counter running and no audio. All other functionality seems to be working. I can record the video, after recording video if I directly go to play mode (with out turning off) then it displays recorded video with blue horizontal tripes and no audio. If I turn off camcoder and again go to play mode it displays blue screen and no audio.
How can I fix this problem?

thanks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 135 Answers

Sorry to say- but it is trashed.. It would cost more to fix it than it would be to buy a new one.

Posted on May 06, 2017

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: Panasonic Palmcorder PV-GS15 Software

What u need at the minimum is an addon card for downloading(refer to the manual for the exact No. it is something like IEEE1395 or so) Then connect the cam to this thro' the cable.
If u use windows xp u have a movie maker. u can use that s/w. Else try to get pinnacle studio or studio 8 to dump and edit etc.
all the best.

Posted on Dec 28, 2007

gana23
  • 5 Answers

SOURCE: panasonic camcoder nv md9000en(reset)

you may refix the mechanism. problem will solve.

Posted on Feb 01, 2008

jacklee366
  • 541 Answers

SOURCE: How to download video file

you need software i use Pinnacle Studio it the best one i think help this helps

Posted on Nov 30, 2008

  • 1 Answer

SOURCE: PANASONIC SDR-H40P (Write Proctetion)

I had the same problem while trying to delete video off of the camera's hard drive using the VideoCam Suite software. I never could figure out how to do it using the software. However, you can delete scenes from the hard disk directly in the camcorder using the menu. For instructions, see page 59 of the manual for this camcorder at http://service.us.panasonic.com/OPERMANPDF/SDRH40P-MUL.PDF Good luck!

Posted on Jun 10, 2009

  • 1 Answer

SOURCE: Need the software for Panasonic PV-GS15

Anyone have any idea where I can get the software for a Panasonic PV-GS15, to be able to pull video from my camera to my PC? Or do you kno w any way around software??

Posted on Aug 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi8 MP tapes


hi,
what is your camcoder ? HI8 or Digital 8 did you record all the tapes with same camcoder ?
what ever HI8 doesnt go on Digital 8 and vice versa

Apr 02, 2014 | Sony Video Cameras

1 Answer

How do I fix error code E61?


No need of any special solution. I had the same issue/error message with my DCR-DVD01 - Sony camcoder which is now 9 years old.

What i did is the following? (weird steps):

1. Turn on the sony camcoder - while connected to wall power
source.
2. Keep a heavy cloth on top of your dinner table or kitchen island.
3. Hold the camcoder facing up in the regular way as you try to
record a new video.
4. Hold on the front of the camcoder & at the back and gently tap
on the heavy cloth (as if you are going to smash it & break it).
5. Do this 3 times.
6. Shut down the camcoder.
7. Restart the camcoder after 3-5 seconds.
Thats it.
This worked for me.

Sep 29, 2013 | Frigidaire Dryers

2 Answers

The vision is blury and it keeps flashing E:61:10


E:61:10 is a lens error code. Could be a connection issue between the lens and the main board or a bad lens. You will need to have this looked at by an experienced technician. www.austintelstarservices.com

Aug 29, 2010 | Sony DCR-SR47 Camcorder

1 Answer

Panasonic pv-gs15 will not play back recorded video in the mini dv deck. all i see is a blue screen with red text ''picture'' on bottom right corner of the screen


Make sure your tape tab is open. See if this works. Sometimes the tab should be closed to prevent eraser or recording over existing film but sometimes the tape tab has to be open to allow for playback or dubbing?

May 28, 2010 | Panasonic Palmcorder PV-GS15 Mini DV...

2 Answers

My screen is striped blue during playback with no soud panasonic palmcorder pv gs15


Your tape has a small latch on it that closes to protect from recording or eraser and opens to allow for playing or dubbing. Slide it open and see what happens.

Sep 25, 2009 | Panasonic Palmcorder PV-GS15 Mini DV...

1 Answer

I have filmed on to a tape, and now am trying to download on to my PC and store it there. How please?


hi

most camcoders do have a USB connectivity cable and using this connect the camcoder to the PC

once connected u will need to install the required drivers for the Camcoder to be recognised by the PC (this is a one time process)

then the firmware with the Camcoder will also provide u with some basic recording software u may install that too and then go to the starting of the tape (rewind on camcoder) and play and at that point in time click on the record button on the software installed on the PC

hope this helps
Cheers

Jun 23, 2009 | Video Cameras

1 Answer

Camcoder problem


The USB port on the camera is to download still pics from the Camera's SD Card to your computer. USB connector is not for video downloading.

For video downloading you have to use FireWire port. Your computer must have a FireWire port too. You will need some sort of video downloading software - like Microsoft's MovieMaker. There are some free software to download videos from mini dv camcorders to computer. It takes 1Hr to download 1Hr tape - you have to play it all to record it all. You will need video editing software to do different editing if you want. Otherwise, MovieMaker can make a good avi file. You can upload that to YouTube.

3yrs ago when I purchased this cam, I did not have FireWire port in my computer. I searched online a lot and found a way to download video using USB - it was tough, complicated. It was possible, but quality was too bad and too many dropped frames.

If you do not have firewire port, google for FireWire PCI Card, should be <$10. You have to install it inside your PC. Also search for FireWire cable ($10+/-) that will match BOTH camera and PC ports.

Thank you.

Aug 18, 2008 | Panasonic PV-GS19 Mini DV Digital...

1 Answer

Need help


Download Driver
http://esupport.sony.com/US/perl/swu-matrix.pl?upd_id=1452

Install then download and install a video program like movavi videosuite or ulead videostudio (i personally recommend movavi).

Plug in the camcorder and switch it on, put it on play/edit and play the video, press record or capture in the software and let it record!

once the video scene in the camera is done, stop the recording and do what you wish!

GOOD LUCK!

Jul 02, 2008 | Sony Handycam DCR-TRV265E Digital...

1 Answer

Timed recording?


Sorry. No such thing avail, to my knowledge.

Nov 19, 2007 | Panasonic Palmcorder PV-GS15 Mini DV...

Not finding what you are looking for?
Panasonic NV-GS10 Mini DV Digital Camcorder Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Video Cameras Experts

Pieter Vleeshouwers
Pieter Vleeshouwers

Level 3 Expert

1793 Answers

yadayada
yadayada

Level 3 Expert

75817 Answers

zimcloud

Level 2 Expert

135 Answers

Are you a Panasonic Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...