Question about Sears Craftsman LiftMaster Chamberlain Garage Door Opener Wireless Keypad Model 976LM Security+

1 Answer

My Craftsman 53684 keyless won't work with my Craftsman 53930DM.

I just installed a Craftsman garage door opener model #53930DM and I can not get my Craftsman keyless entry keypad model #53684 to program the password/pin. I have tried the directions provided by the keypad:

1. Enter the four digit password desired, then press and hold Enter.
2. Press and release the SRT (learn) button on the door opener panel.
3. After the opener light flashes, release the Enter button

I have also tried the directions provided by the garage door opener:

1. Press and release the "learn" button.
2. Enter the four digit password desired, then press and hold Enter.
3. After the opener light flashes, release the Enter button

Neither one has worked! I have a Clicker CLK1 that won't work as well! Help!!!

Thanks.




Posted by on

  • Anonymous Apr 12, 2009

    Yeah I am experiencing the same problem. All of my remotes that came with it work but I cannot get the wireless keypad to work. I have tried 2 keypads and neither work. I have also tried resetting the computer and that did not help either. Additionally it will not take the code from my car's receiver either. My other garage has the same unit and it works well, I am not sure why this unit will not. Any suggestions?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,992 Answers

I've never seen the first set of steps you mention. You always need to press the "learn" button first so the opener will be in the mode to capture the new code. As far as I know it is not necessary to hold the Enter button on the keypad (at least I never have). While the "learn" LED is lit on the opener, just key in the new code and press Enter.

Maybe you should try clearing the receiver first by pressing the "learn" button and holding it until the LED either goes out or starts flashing (depends on model). Then try reprogramming. Maybe the little computer is confused.

Posted on Dec 01, 2008

  • Gary Tompkins
    Gary Tompkins Sep 05, 2011

    Well, I just bought a Sears opener and I have the same problem but neither of these fixes mentioned helped to fix it. I see 4 thumbs up but no comments on how it actually helped other people. If anyone is listening.... is there a solid resolution to this issue. I can't reach Sears support as it's a Holiday. Note: I tried resetting the Learner and had to reprogram my two transmitters, but that worked like a charm. Just not the keypad thingy. Thanks!

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Craftsman Keyless entry model 132B2386-6 with flashing lights, wont open. Already put in new battery still doesn't work


Why would my Keyless Entry close but not open the garage ...

www.shopyourway.com > Manage My Life > Questions
Mar 27, 2008 - I have a Craftsman Security+ Keyless Entry, P/N 139.53684 purchased with my ... However, the door will not open, but the keypad flashes as before. ... Check if there is a flashing green light on your wall control in the garage. ... The 2 remotegarage door openers won't open or close the garage door; but the ...

Craftsman garage door opener won't open or close, why ...

www.shopyourway.com > Manage My Life > Questions
Hi, I have a Craftsman 1/2 HP garage door with keyless entry (P/N ... When I click theremote or the wired button, the main lights come on, the motor moves ... Five flashes means that the RPM sensors has most likely stop communicating.

LiftMaster - Support - Videos ' LiftMaster

https://www.liftmaster.com/Customer-Support/Videos

Chamberlain GroupHow to program a wireless keyless entry using your garage door opener's LEARN button. How to ... Why the LED or light on the door control is blinking and my remotecontrol is not working? Why isn't ... Why won't my door fully open? How to ...

Feb 08, 2016 | Garage Doors

1 Answer

Craftsman 3/4 hp garage door opener


not sure, but see the users manual here:

http://www.manualslib.com/manual/32293/Craftsman-139-5399.html

Aug 14, 2012 | Craftsman 3/4 Hp Garage Door Opener System...

1 Answer

Want to know what the default code the Craftsman Model 139.53675SRT2 keyless pad returns to when it is reset


There is no default. It works with the code you install. There is no code installed at the factory.

Oct 02, 2011 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

I have a lift Master Security +, 1/2HP garage door opener. Will the Craftsman 53684 Wireless entry keypad work with it?


Without a model number no one can tell.

Try this:

Locate the smart/learn button on the rear of the motor unit near where all those white wires go. Press and immediately release this and then walk over to the keypad and key in any 4 digit code you like and press enter.

Jan 07, 2011 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Keypad won't work anymore


Lets make sure you are programming it correctly, make sure the battery is new. Press and release the learn button on the motor. Within 30 seconds enter in the 4 digit code followed by the up/down button. The light bulb should flash once. If you can't get it to code in this way you will need to replace the keypad. Thanks BB

Feb 22, 2009 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Keyless entry pad for garage door opener


THE FREQUENCY OF THE UNITS ARE PROBABLY NOT COMPATABLE THEY CHANGED ABOUT 2 YEARS AGO.

SORRY - I THINK YOU NEED A NEW KEYPAD TO GO WITH THE NEW OPENER.

Oct 22, 2008 | Sears Craftsman LiftMaster Chamberlain...

Not finding what you are looking for?
Sears Craftsman LiftMaster Chamberlain Garage Door Opener Wireless Keypad Model 976LM Security+ Logo

1,069 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sears Garage Doors Experts

Al Clark

Level 2 Expert

290 Answers

Cindy Wells

Level 3 Expert

4758 Answers

Pieter Vleeshouwers

Level 3 Expert

1420 Answers

Are you a Sears Garage Door Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...