Question about Proview PA-32JK1A 32 in. LCD Television

2 Answers

No picture i have a proview flat screen tv pa32jk1sa 3200 and it plays sounds changes stations but has no picture just a black screen what can be done

Posted by on

  • Isparky Jan 12, 2009

    The set powers up and I have sound, channels will change. The first time it happened, I turned it on and off several times and then got a picture. Since then no picture.

  • m_figueroa38 May 11, 2010

    where are located the power board

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 26 Answers

LCD inverter is faulty.

Posted on Jul 23, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 558 Answers

Bad capacitors in the power board area these can be replaced and soldering is required to replace them

Posted on Dec 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to get another tv remote?


Find a seller of the product and ask them

Oct 18, 2014 | Proview Televison & Video

1 Answer

How to fix a proview 3200 HD TV with no sound?


Check the speaker/s first. If found OK; check and replace the damaged component/s at its audio output section circuit board. If needy, replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. Surf the site with patience.
http://electronicshelponline.blogspot.com/

Aug 10, 2014 | Proview Televison & Video

2 Answers

Comes on ,but no pic or sound.light blue screen. i think the blub is gone


You can tell if the bulb is out by powering up the TV and holding a flashlight to the tv. Put the flashlight close to the screen and see if you can see any picture. If you can see picture, then it's the backlight. If you can't see pictures it is probably a more serious issue and would likely need to be repaired by the manufacturer.

Feb 24, 2010 | Proview PA-32JK1A 32 in. LCD Television

1 Answer

Proview 32' without picture or sound


hi first of all u should check ur transistor connections.Check your Horizontal and vertical output transistors.You should also check the horizontal and vertical yoke connections as well as your low voltage regulators.... if any of these got damaged u should purchase a new one.. but try to purchase with the help of a tv service assistant...
thank u!!!
rate me

Jul 07, 2009 | Proview PA-32JK1A 32 in. LCD Television

1 Answer

I have proview flat screen tv pa32jk1sa and it plays sound but has no picture justa black screen what can be done


Check your cables and make sure their all in good standing.....change the "input" to "TV" and see if your get snow on the screen. If there's a snowy picture then the screen is good, if not then its a job for your local flat panel tv shop or my shop. There's definitely a problem in the video control section, or dc-to-ac inverter section.....


Nov 30, 2008 | Proview PA-32JK1A 32 in. LCD Television

9 Answers

Proview rx 326 model 3200 tv sound but no picture


I just fixed my proview 3200 that doesn't have picture but with sound.
First, thanks for the tips I got from this forum. I checked the 24v from the power supply board and that's perfectly working fine. I then check the fuses in the Inverter board. There are 4 white fuses (2amp I guess, i cant remember) and 1 black fuse (1amp/76v just behind the wire connector going to the power supply board). The black fuse is the one that blown out on my tv. This fuse supplies power to the LM358A IC. I know its not right but I just solder a thin piece of wire to short circuit this fuse. I'm lazy to drive to RadioShack to find this fuse. :)
....and that worked beautifully. Check the picture attached for what I did.
66c42e5.jpg

May 27, 2008 | Proview PA-32JK1A 32 in. LCD Television

1 Answer

Proview 3200 HD TV


as you are using the ch3 , have you previously scanned and locked in all the channels for cable,

Apr 25, 2008 | Proview PL913S 19" Flat Panel LCD Monitor

Not finding what you are looking for?
Proview PA-32JK1A 32 in. LCD Television Logo

Related Topics:

375 people viewed this question

Ask a Question

Usually answered in minutes!

Top Proview Televison & Video Experts

Steven Wander
Steven Wander

Level 3 Expert

579 Answers

Tony

Level 3 Expert

2600 Answers

Paul

Level 2 Expert

223 Answers

Are you a Proview Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...