- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Try the vm9312 manual it´s pretty much the same product, i guess is
just that jensen and audiovox are selling the same product with a
diferent model numbers depending on the country they sell it. try this
Specifications Amplifier Output power: 4 x 18 watts sine at 14.4 V and 1% distortion factor at 4 ohms. 4 x 26 watts sine in accordance with DIN 45324 at 14.4 V at 4 ohms. 4 x 50 watts max. power Tuner Wavebands: FM : 87.5 - 108 MHz MW : 531 – 1 602 kHz LW : 153 – 279 kHz FM frequency response: 20 - 16,000 Hz CD Frequency response: 15 - 20,000 Hz Pre-amp out 4 channels: 4 V / < 1 kω AUX input Input sensitivity: 1.2 V / 10 kω
Above are specs for the LA mp74 digiceiver
This is where I found the pdf information for cdc ao71 changer, only problem is it is in other languages.
http://fe0wap79.bosch.de/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/EUR/BeAT_ServiceDocuments-Start;sid=xMwY5KjfON3gIuDbMbhKGKdU-8dWMZg3sZ0=?Language=FR&search_query_name=cdcao71&SellerId=CM_DE I will keep looking.
It might be the lasers wattage has decreased due to the aging of components. did you use a lens cleaner? if not try that then assume that the lens power has decreased. If this is the case take the unit to a shop and have it repaired.
You said you cleaned the player but did you clean the disc? Any scratches, dirt debris?
To clean the disc you can but special cleaning soultions at various retailers. Have you tried playing diffrent discs, that will help rule out if it's the player or disc.
Go to this link and click "find a manual";
It is not for your model exactly, is for a rf10ch, but look on page 12 it shows the standard cable for this sort of unit - it looks like a 15 ft standard din 8-pin (7/1/315) connector. The cable should be well shielded. With this information any electrical shop should be able to make one up.
or contact these guys - they have taken over customer service from jensen, but i am unsure how good they are - please post back if you have any feedback on this.
Hope this helps :)