Question about Konica Minolta magicolor 2430 DL Laser Printer

1 Answer

I need an output tray replacement, i have ordered one before, they apparently have a 1 year life. It was about 7$, i would like to purchase another one. ASAP. TX

Posted by on

  • cpretti Dec 01, 2008


    It's the piece that pulls out so that your checks and or paper doesn't fall right to the floor

  • yoliegarcia Apr 27, 2009

    I have the same problem and I went to Adm207's solution at www.nationalparts.com and it wasn't available. Any other ideas?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Item number 8314139-1007-03

www.nationalparts.com

$10

Posted on Dec 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Unload output tray


Apparently the machine is telling you to remove the copies made from the output tray, probably it is getting heavy.

Nov 10, 2013 | Xerox Phaser 8860MFP Printer

1 Answer

Could you please show me the scanner motor for hp laser jet 2420.


guilopmar_0.jpg
Figure 7-14. ECU wiring
1 FM1, main fan motor (J509)
2 Tray 1 pickup solenoid (J508)
3 Tray 1 sensor (J503)
4 Laser/scanner motor (J402)
5 Memory tag reader (J510)
6 Fuser motor (J501)
7 Main motor (J407)
8 Door switch (J408)
9 FM2, sub fan motor (J512)
10 Thermistors, rear-output-bin sensor, delivery sensor (J405)

Jul 03, 2011 | HP LaserJet 2420 Printer

2 Answers

Hi...I have a problem with my HP Photosmart C7280...can you help ? the error message "Photo tray problem" keeps coming up, telling me to "lift the output tray, push the photo tray all the...


Photo tray problem

' Lift the output tray up and verify that the photo tray

' is pushed in until it stops, then lower output all the

' way down. Press OK button on the printer to

'continue printing

HP Photosmart C7280 All-in-One Printer


1. Turn off printer.

2. Pull out paper tray and photo tray

3. Remove output duplexer (on back of printer)

4. Open input sheet feeder (on top of printer)

5. Open cartridge access door. (Basically lift up control panel and scanner section of the printer)

6. Turn on printer (Power button on now raised control panel)

7. Printer may display message "Performing printer alignment - Do not interrupt"

8. Wait for a few minutes until printer stops making all setup noises.

9. Close cartridge access door, close input sheet feeder, replace output duplexer, insert paper trays

10. Do a test print. All should be fine.

Mar 11, 2011 | Printers & Copiers

2 Answers

My aficio 2035e shows sc 329 and sc 322. what does this mean?


  1. Remove paper from all output trays. Depending upon the options fitted to your device, the output trays are:
  2. Locate the gray cables that are connected between finisher and main unit. Check that they are secure, and that the cables are in good condition.
  3. Switch off the device at the red power switch.

Dec 16, 2010 | Printers & Copiers

2 Answers

Error code 7-402


Error codes 7-401 to 7-404 are life end for the tray rollers. If no jamming probs then enter diags mode (Back and'i' buttons and switch on) scroll down to NVRAM access and select. find CRU counters and select, clear each tray counter and then exit.

Jun 01, 2009 | Xerox Phaser 7750DN Laser Printer

2 Answers

Photo Tray Problem


When nothing worked, I reexamined the trays, and there is a small plastic hook about half an inch long under the left side of the D7460 output tray. The tray below had a small hole. So I clicked the two together, and the printer started printing. Probably like many of you I had elevated the output tray as the printer spews onto the floor. Apparently it needs this connection. So much time lost....

Apr 11, 2009 | HP Photosmart D7460 Printer

2 Answers

Hp laserjet 8100 8150 13.1.42


hp printers typically do not have an error message to cover every known condition, thus if the printer needs maintenance in an undefined area, it will invariably indicate a paper jam. The printer usually responds to the installation of a maintenance kit which will include transfer roller, pickup rollers, and fuser.

Oct 03, 2008 | Printers & Copiers

1 Answer

Xerox Phaser 7700 displays error 7-276


Here is the documentation on that error


07-276 TRAY 3 PAPER SIZE SENSOR BROKEN (TTM)
EXPLANATION
An abnormal AD value was detected from the Tray 3 Paper Size Sensor.
Refer to BSD: CH7.4 CH7.13A
Procedure
Set Tray 3 in the machine.
Between Tray Module PWB J548-11 (3T: J548-11 , TT: J548-11) (+) GND (-)
Is the voltage the same as that in the Tray 3 Paper Size Sensor Output Table inscribed in BSD: CH7.4?
Yes No
Between Tray 3 Paper Size Sensor J820-2 (3T: J820-2 TT: J820-2 ) (+) GND (-)
Is the voltage the same as that in the Tray 3 Size Sensor Output Table inscribed in BSD: CH7.4?
Yes No
Between Tray 3 Paper Size Sensor J820-1 (3T: J820-1 TT: J820-1 ) (+)J820-3 (3T: J820-3 TT: J820-3) (-)
Is the voltage +5VDC?
Yes No
Using the wire network from Chapter 7, check the +5VDC circuits to Tray 3 Paper Size Sensor J820-1
(3T: J820-1 TT: J820-1 ).
(WN 7.3.6 +5VDC-2)
Check for malfunctioning paper guide, poor contact caused by bending in the projection that pushes the switch, and
if there is no problem, change the Tray 3 Paper Size Sensor. (PL16.1)
Check for cut wires, poor connections between Tray 3 Paper Size Sensor J820-2 (3T: J820-2 TT: J820-2 ) and Tray Module
PWB J548-11 (3T: J548-11, TT: J548-11)
Change the following parts successively:
TRAY MODULE PWB (PL16.9)
MCU PWB (PL13.1)
ESS PWB (PL13.1 ).

Apr 26, 2008 | Printers & Copiers

1 Answer

Xerox DC12 Error: 7-286


Accurate on the code.
If the lift motor is not running in diagnostics, that is telling you one of 4 things.
In order of likelyhood.
1.The lift motor itself is bad.
2.The connector to the motor needs unplugged and plugged back in.
3, The source to the motor is out, therefore the power supply is bad.
4 The MCU, main processor board is bad.
I suspect the lift motor has failed.

Mar 02, 2008 | Xerox DocuColor 12 Printer

Not finding what you are looking for?
Konica Minolta magicolor 2430 DL Laser Printer Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Printers & Copiers Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5695 Answers

David Burkhart
David Burkhart

Level 2 Expert

207 Answers

George Mclaughlin

Level 2 Expert

330 Answers

Are you a Konica Minolta Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...