Question about Samsung HLR5667W 56" Rear Projection HDTV

1 Answer

Colored lines and rectangles

I get these lines on my Samsung HL-R5667W when I turn it on in tv mode. When I switch to component 2 the picture is okay ,but it seems to be locked in zoom mode,picture is large and extends beyond screen.
I have tried resetting and turning off power,unplugging cable,etc. I can't seem to rectify the problem, please help

Posted by on

  • david_et22 Feb 04, 2009

    I have a samsung HLR5067WAX-XAA it takes a few seconds to turn it on and when the screen is on goes to colored lines and rectangles I switch to any other component and the screen goes to blue and the appears the problem except with the HDMI it works perfect just that.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 505 Answers

Sounds like a problem on the digital board. try hard booting (unplug for 2 minutes) to reboot the microprocessor. if no resolution, look for a new board part # bp94-01859f if your model # ends in WX

Posted on Dec 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HL-R5667W Picture just went blank, no sound. turn on tv the timer,lamp and stand by/temp light all flash. replaced lamp still same issue heard intermittent whirling fan rubbing sound before it went bad


Sounds that tv got color wheel problem that will be replaced.
If you are handy with electronics stuff repair then replace color wheel in light engine of tv to solve its issue.

Sep 13, 2010 | Samsung HLR5667W 56" Rear Projection HDTV

1 Answer

Samsung DLP HL-R5667W not turning on. Showed


Purple spots means Bad Light Engine Part number is BP96-00822J Encompass Parts Has them for
$950.00 - $350.00 core price Part $600.00
1-800-638-3328 Lamp# BP96-01073A

Ballast Board# BP47-00027A

Jan 08, 2010 | Samsung HL-R5667W 56" HDTV

1 Answer

Samsung DLP turns on and off - cycle repeats


make sure put the lamp door back before trying to turn it on because they have switches on them that allow the tv to turn on. If that is ok you probably have a bad ballast.
Call a local tv repair shop to further diagnose the problem.

Dec 10, 2009 | Samsung DLP HL-P5663W 56" TV

1 Answer

HLN507W Samsung DLp Horiz. lines


it sounds like the dmd board is failiing

Mar 13, 2009 | Samsung DLP HL-P5663W 56" TV

1 Answer

Samsung DLP HL-R5667W, seeing little boxes of static flashing


samsung color weel replacments are all the new air bearing type insted of fluid type. if you replace the new color weel , color will look bad. also note when ordering your replacment make shure it comes from samsung and not just a generic model.
the original replacement will come with a set of instroction to reset the dmv ajustments.
find the dmd pcb and look for a2 jumper that is visable through a small squaire remove the jumper. then folow instrustions with new color weel.
hope this helps.
regards,
daniel.

Jan 13, 2009 | Samsung DLP HL-P5663W 56" TV

1 Answer

Samsung HL-r5667w TV shuts down on its own.


You may have a colorwheel going bad. The bearings start going out and this is an indication of the failure. The colorwheel is located in the light engin e therefore you may want to get a qualified tech to look at it

Dec 16, 2008 | Samsung HL-R5667W 56" HDTV

1 Answer

Samsung dlp hl-r5667w


This Tv make a lot problems with the color wheel and fan thermostat, lamp cool. Need be check the color wheel first. I am suggested dont have nothing on the back cover ( make hot or not ventilation). More information parts at tritronicsinc.com Thank you

Aug 12, 2008 | Samsung DLP HL-P5663W 56" TV

1 Answer

Help with tv


does your tv make noise the bearing usually go out on those color wheel sets so do the lamps on that model if you are confident go for a repair at home here is a shortcut http://www.jangro.com/a/2006/07/24/samsung-dlp-replace-color-wheel/ if this is the year click the link above

Feb 16, 2008 | Televison & Video

1 Answer

Samsung DLP HL-R5667W


Color Wheel problem.. to generate colors on a dlp the light is shine through a motorized wheel. that has different color filters on it. this is a motor and anthing that moves will eventally wear out. i just replaced the color wheel on a samsung today. standard for this to go out in about that time. i believed our shop charged 250 to put a new one in. Willie@FORDTV.COM

Sep 23, 2007 | Samsung DLP HL-P4663W 46" Rear Projection...

Not finding what you are looking for?
Samsung HLR5667W 56" Rear Projection HDTV Logo

318 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

70983 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1640 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...