Question about GE 2.4GHz Cordless Bedroom Phone

1 Answer

Hand piece has gone bezerk

I bought a modle 27980 GE phone about 9 months ago and it worked well until about a week ago then the hand piece went bonkers. the numbers can not be read, the phone does not ring, nothing works anymnore on that part of the phone. I need to get it working again or I have spent good money on a doorstop! What is wrong and how do I get it going right?

Where can I send it to get the handpice replaced here in the Reno Nevada area?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

I had a problem with not being able to dial out... some digits came up as bizarre symbols and it didn't even take all 10 digits before beeping out. What I did to fix the problem was to remove the battery from the phone - actually pull the battery plug out, leave it for a minute then plug it back in. Then the phone started working again. You might want to try this... sort of like a hard reboot of the phone.

Posted on Dec 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Model 27980


See the instructions in the third column of the first page of this manual: http://www.home-electronics.net/ge/pc/IB/27980GE3_IB.pdf

Jun 27, 2013 | Lands Phones

1 Answer

Good morning: Approximately one year ago, I purchased a GE Dect 6.0 cordless phone (3 in total). I purchased this from London Drugs in Lethbridge, Alberta, for approximately $99.00. Sale price. I...


Dear Marilyn, not to worry but I shall try to help. First of all check your recharrgeable battery Use a multimeter to check for voltage,if the voltage is below 3.6V then replace the battery and try. If there is no charging light onthe phone perhaps your adapter is faulty . use the multimeter to check the voltage on the adapter end.. If voltage is absend replace if not you will clean the contacts to the hand set . next You will have to open the set and access the main board to check on the regulator. Also check the line switching semiconductor. These are the possible general faults. Hope you can get help if not familiar with electronics. Good day

Aug 13, 2010 | Uniden Cordless Phone

1 Answer

Clock works, and radio works, but no dial tone on phone what is problem? can't get phone to work why?


Try removing the phone handset battery and re-plugging it in (i.e. a reboot of the cordless phone).

Jun 30, 2009 | GE 27980 Cordless Phone

1 Answer

Wall mounted ge phone


Problem solved. The little black square was supposed to be put back upside down...This allowed the hand held piece to hang on.
thanks

Aug 05, 2008 | GE 29263GE2 Corded Phone

1 Answer

GE TC25951EE3 Brand new


need manual foe model tc25951ee3-a search and search and got nothing. i;m not impressed.

Jul 20, 2008 | Uniden Cordless Phone

1 Answer

Motorola z8


for bpo solutions surf www.lexicon.com

Jun 13, 2008 | Motorola Lands Phones

1 Answer

Phone holds charge from 12-55 min. and then goes dead


Your handset or charger has gone bad (provided you installed rechargable batteries), or both. The previous user may have installed alkaline batteries (is their a white powdery residue in the the charge compartment?), and that can ruin the charge circuit. Either way, you probably need to contact repair. You can go to www.cordlessrepair.com

May 23, 2008 | Siemens Gigaset 4000 Phone

1 Answer

How to set alarm for AM station


Once you are in alarm on mode (hold alarm button on left until it changes display and lets you select buzzer/radio/off) Then you can push the set button to select radio station/volume etc.

Jan 29, 2008 | GE 2.4GHz Cordless Bedroom Phone

4 Answers

Ge phone answering machine


The solution for the base (not the handset) is to press and hold for 2 seconds the "Skip" button (it's marked with ">>").

Aug 27, 2007 | GE 25951EE2 Phone

3 Answers

Phone not working


You may need to re-register the phones. Below is a link to the owners manual in case you don't have one. Good luck. http://157.254.235.130/public/IB27996DOME0.pdf

Jun 13, 2007 | GE 27996 Twin Cordless Phone

Not finding what you are looking for?
GE 2.4GHz Cordless Bedroom Phone Logo

Related Topics:

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Lands Phones Experts

kakima

Level 3 Expert

98868 Answers

Cindy Wells

Level 3 Expert

4808 Answers

Dudeman321

Level 2 Expert

230 Answers

Are you a GE Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...