Question about Panasonic RN-305 Handheld Cassette Voice Recorder

Open Question

VAS on Panasonic RN-305

I can't get the VAS on my recorder to activate. It records normally when the button is pushed, but nothing happens when I try to activate the VAS. I put the switch on the VAS/Fast Play button and adjusted the volume/VAS level, but still nothing happens when I speak to it. Am I missing a step here?

Posted by on


2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


SOURCE: rn 305 doesn't record nor play

I had a similar problem and found out the batteries are weak and changed to a new batteries. Now it works

Posted on Sep 26, 2007


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Looking for onwers manual for microcassett recorder model RN-305

You can download the User Guide from that webpage.

If this solves your stated problem, please come back and rate our solution. Thank you.

Dec 28, 2010 | Panasonic Audio Players & Recorders

1 Answer

Manual operation

You can download the manual at

Nov 19, 2010 | Panasonic RN-302A Handheld Cassette Voice...

1 Answer

Red record button will not depress to start recording

Check that you have not knocked the record tab out of the tape you are using.  Try a new tape.

May 28, 2009 | Panasonic RN-405 Handheld Cassette Voice...

2 Answers

Set the clock on my Panasonic NV-J11 HQ VCR

Hey there - I've got the exact same model VCR; although I've lost the manual as well, I've been using it for so long that I

can usually remember it all from heart:

To set the clock

1. Open the flip-down lid, push [CLOCK] button.
For each of the steps below, use the white-labeled [+] and [-] tracking buttons to increase/decrease each number.
2. Two digits should be blinking - this is the year (last two digits only) - adjust and push [NEXT] when done.
3. Two digits, with a "D" next to them should now be flashing - this is the month (1=January thru 12=December), adjust and push [NEXT] when done.
4. Two digits, with a "M" next to them should now be flashing - this is the day-of-month (1..31), adjust and push [NEXT] when done.
5. The time should now be displayed, with hours flashing - adjust and push [NEXT] when done.
6. The minutes of the time should now be flashing - adjust. When you push [NEXT], this will complete the date-setting and start the seconds-of-the-minute off at zero - handy for synchronising to an external time source (I recommend using the

Teletext broadcast clock if available - you'll usually find your recordings will start right-on time when you do this, depending on your TV station).
7. If you make an error at any step above, push [CLOCK] to exit clock-setting mode and start again.

Depending on your model of VCR - the clock may either persist through power failures (backup battery) or may have to be reset next time power is lost. Mine doesn't seem to have a backup battery.

To program the VCR for timer-recording: There are two modes, Timer Record (start and finish recording at arbitrary times in the future), and OTR ("One Touch Recording", start recording right now and finish at a set time in the future).

*** Timer recording ***
There are eight programme slots (numbered 1-8 on the display), each programme slot has an individual channel and start/finish time associated with it. Programmes can be scheduled up to 1 month in the future.

Push [PROG/CHECK] to cycle through each slot (after the eighth slot, it will return back to normal operating mode).

When you want to set a programme, push [PROG/CHECK] until you find an empty slot (date/time will be all dashes). Then do the following:

1. Channel should be flashing - set this using white-labeled [+]/[-] tracking buttons and push [NEXT] when done.
2. Date should be flashing (defaults to today), use [+]/[-] to adjust starting date and push [NEXT] when done.
3. Set the starting time ("ON" should be lit next to time) (defaults to now), use [+]/[-] to adjust starting time and push [NEXT] when done.
4. Set the finishing time ("OFF" should be lit next to time) (defaults to starting time), use [+]/[-] to adjust and push [NEXT] to complete the setting of this programme. After this, you'll be returned to the start of setting the next programme (the unit will also beep five times to confirm you have a valid programme set).

If you make an error (or you need to clear a programme slot that already has a programme set), hold down the [-] and [+] buttons for three seconds until the starting time/date becomes all dashes.

When you're done with setting your programme(s), keep pressing [PROG/CHECK] until you exit into normal operating mode, then push the [TIMER REC] button to activate the timer; this will put the VCR into timer standby mode, and the orange clock icon should be lit solidly on the display. There should also be a number (1..8) lit for each programme that has been set, but is still yet to run. Make sure you have the tape inserted and positioned in the right place when you do this.

After timer standby mode is activated, you can then push [PROG/CHECK] to review the individual programme slots; each push of [PROG/CHECK] will cycle through each slot (the display will time out in 10-15 secs).

To get out of timer standby mode (either when after the programmes have run or if you've made an error), push [TIMER REC] again - this will return you to normal operating mode (where you can fix errors if need be). Programmes that have run to completion should be automatically be cleared.

*** OTR (One Touch Recording) ***

This will start the tape recording immediately (good for when you have an unexpected distraction or sudden change of plans) and have it stop at a later preset time. The OTR mode only has one programme slot, unlike timer record.

1. Insert tape, have it positioned where you want to record from. Set the channel to the one you want to record from.
2. Open the flip-down lid, look at the bottom-right corner of the array of buttons inside.
3. Push the green-labeled [OTR +] button; this will start the tape recording instantly (the red "OTR" indicator should be lit on the display).
4. The stop time should also be displayed - use the [OTR -] and [OTR +] to adjust the stop time. When you're done, that's all you need to do (you can adjust it any time later).

To abort OTR mode (ie. if you start it by mistake, or want to stop the recording early), push the main [VTR] button to stop the recording. Yes, that's right - turn the whole thing off, it'll leave you in standby mode.

Hope this helps!

-- Bryan R.

Nov 26, 2008 | Panasonic PV-7451 VHS VCR

1 Answer

Onscreen display

I had the same problem when I pushed the wrong button and didn't know which button I had pushed. The Date and Time just blinked. I could change them with the clock buttons. Then I really got frustrated. I saw the display button. I pushed it. It seemed that nothing had happened. Then I pushed it again, and part of the display disappeared. So, I pushed it again and yeah!! the whole display disappeared. So, try pushing the display button enough times to get the display to disappear. You have waited a long time for an answer. I hope you got one before today, 5-18-2009. I am not an expert, and I have no manual. But, I found a way to get rid of the display. I'll try to not push the display button again if I don't really need it. I think that you have to cancel the display before you record. I don't think it can be taken out of the playback.

Jul 15, 2008 | Panasonic AG-188 Camcorder

3 Answers


You need to know in which position was camera turned of.
So try turning it on in RECORD OR PLAY position.
It will work then...

May 04, 2008 | Panasonic NV-GS15 Mini DV Digital...

1 Answer

Panasonic Portable Cassette Recorder/Auto Stop

try toggling the Hold button on the back. My question is whether activating the Hold button is the only to turn this puppy off.


Jan 12, 2008 | Panasonic RR-US050 Digital Voice Recorder

2 Answers

Won't Record

I can not get it to record or play back. I have replaced the batteries but I do not recall how to operate the unit.

Which button is which? I have tried to find instructions online but I keep coming back to this site.


Chere Lampis

Sep 26, 2007 | RCA RP5010 Digital Voice Recorder

1 Answer

Rn 305 doesn't record nor play

I had a similar problem and found out the batteries are weak and changed to a new batteries. Now it works

Nov 26, 2006 | Panasonic RN-305 Handheld Cassette Voice...

Not finding what you are looking for?
Panasonic RN-305 Handheld Cassette Voice Recorder Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Audio Players & Recorders Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers


Level 3 Expert

5318 Answers


Level 3 Expert

102366 Answers

Are you a Panasonic Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides