Question about Westinghouse LTV-32w1 32 in. HD-Ready LCD Television

Open Question

Westinghouse lcd hdtv 26h520s-red/orange/blue light flashing-HELP

So last night we purchased an hdmi cable plugged it into the tv and all channels worked fine, but we noticed the power light on the front of the tv was switching from blue to orange to red constantly.  We turned off the tv and turned it back on in the morning and none of the HD channels work? They are all transparent green screen. All other channels work fine.
If anyone has had this problem & can share their solution it would be greatly appreciated.
thanks

Posted by on

  • In the morning and none of the HD channels work? They are all transparent green screen. All other channels work fine.

×

5 Suggested Answers

  • 1 Answer

SOURCE: Westinghouse ltv 32w4 hdc 32.02 in. hdtv lcd tv / dvd combo

My 42" Westinghouse HDMI inputs just stopped working. I thought it was the TW Explorer 4250HDC issue so I got a new one from TW. Still said no signal from HDMI. So, I shut the TV down and pulled the power cord out of the back. I waited a few seconds and reconnected the pwr cord. The TV "re-booted" so to say and now the HDMI inputs work. I think TVTEK has the right idea that it is firmware/software related. In the mean time, you might want to give that a try.

Posted on Jan 04, 2008

  • 4 Answers

SOURCE: Westinghouse 47 in LCD HDTV

cfusion.com has the mainboard for that. it sounds like you just need a new one, it looks like its about $169

Posted on Apr 03, 2009

  • 1 Answer

SOURCE: Westinghouse 1080P 42" LCD TV - HDMI stopped working

Just reset the TV found out how here: http://www.danielcoburn.com/uncategorized/westinghouse-1080p-42-lcd-tv-hdmi-stopped-working-fix/
Hold the power button for 10 seconds.

Posted on Jul 26, 2009

FixinFax
  • 3085 Answers

SOURCE: Purchased and set up both Vizio SV370XVT HDTV and

Try setting your cable box for Closed Captioning. Worked for me.

Posted on Jan 21, 2010

westytech
  • 120 Answers

SOURCE: Westinghouse SK-26H520S turns on but wont go past start-up screen

Hello, two things, one if the unit gets stuck there meaning that the W stays there and it shows that on the screen thank your main board is stuck on the boot mode and you will need to replace. The second is if the W goes away than you need to see if you can plug something in and change the input mode (even if you can't see anything on the screen) so that you can see if there is any sound coming in to the unit. If this is the case than you are looking at dead inverter board. If you would like to further troubleshoot than please email me at westytech@wde.com for further assistance. If this information was useful please rate me on this webpage.

Posted on Jan 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Westinghouse SK-26H520S no picture sound


The input signal is missing and the blue screen background comes on the screen. Change the input to some other device which you are sure works and see.

Jul 25, 2012 | Westinghouse SK-26H520S 26 in. LCD HDTV

1 Answer

The picture and audio keeps going in and out and HDMI keeps popping up on my screen. Is this the tv or the cable box or maybe the cord?


it could be a combination of things but here is a simple fix

unplug power from both the TV and Cable Box for at least 5 minutes
flip the HDMI cord wait 1 minute plug power cords back in
ENJOY

Dec 03, 2010 | Westinghouse SK-26H520S 26 in. LCD HDTV

1 Answer

Westinghouse SK-26H520S LCD TV has blue screen on the side


Vertical color scan has an open or short..............it could also be a ground problem with in the V-color scan circuits...

If you tap the tv and the color bar is gone then its a ground problem with in those circuits above. Needs a solder re-flow and check the condition of ribbon cables.


CWR

Oct 29, 2009 | Westinghouse Flat Panel Televisions

1 Answer

Westinghouse lcd 26" has blue screen and no sound


1. plug it into a input device (well duuh)
2. it could be a fried mother board or a cracked one !!
3. it could be the sound plate a gt674jj49329710hfwllw plate u need u probably have a gt683jj63835540gdhdys plate !!
4. take it back !!

Jan 03, 2009 | Westinghouse SK-26H520S 26 in. LCD HDTV

1 Answer

Westinghouse 47"lcd tv


are you using an hdmi cable or the red blue and green cables that came with the xbox? if using the original cables there is a switch on them that sets it to HD or standard. hope that helps

Jun 06, 2008 | Westinghouse TX-47F430S 47 in. LCD TV

2 Answers

Westinghouse lcd tv ltv-27w2 no picture or sound


power supply first one...second one input hdmi pcb defective..

Mar 06, 2008 | Westinghouse LTV-27w6 27 in. LCD HDTV

Not finding what you are looking for?
Westinghouse LTV-32w1 32 in. HD-Ready LCD Television Logo

Related Topics:

742 people viewed this question

Ask a Question

Usually answered in minutes!

Top Westinghouse Flat Panel Televisions Experts

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

The Knight
The Knight

Level 3 Expert

68323 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Westinghouse Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...