Question about Computers & Internet

1 Answer

I have installed Hallmark Card Studio 2008. When finished it said installation was complete. However, when I click the Icon, the program will not open. What do I do?

Posted by on

  • 2 more comments 
  • kme8 Nov 30, 2008

    My computer is an HP Pavilion home PC a1000n not Vista



    I have other greeting card programs on my computer and have never had a problem with any of them.

  • kme8 Nov 30, 2008

    Reinstalling did not fix it. My computer is not Vista and the book says to adjust to other versions of Windows but it does not tell me how to adjust or where to look to get directions to adjust the program for XP. If the same book is to be used for more than one version of a computer, directions for each version should be clearly stated. I resent this omission. Why should I pay for instructions when I can't even access the program first.

  • CHATTYEDIE Jan 24, 2009

    chattyedie i have just bought the 2009 version of hallmark and it says itis for vista and hp. i cannot get it to load fully , yet it was put into my daughters vista and loaded perfectly. i think you people who sell these products should give all directions. i am not a real savy computer person but have installed your programs from 2005 till the present without a problem. please help.

    chattyedie @gmail.com

  • Tim Babcock
    Tim Babcock May 11, 2010

    Is this for a Vista computer?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,794 Answers

Try reinstalling the program again.

Here is some information about disk 5:

http://www.hallmarksoftware.com/support/support.aspx

Posted on Nov 30, 2008

  • Tim Babcock
    Tim Babcock Dec 01, 2008

    The link I provided for you has a patch file on it to download. If you install this patch file, it may fix your problem.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix windows defender for free


The Windows Defender software constantly scans your computer for threats such as spyware that may slow down your computer or try to steal personal information. If the software wasn't installed properly or is conflicting with other programs running on your machine, Windows Defender may not work correctly. To repair the software you either need to download the latest update available for the program, or you need to completely uninstall and reinstall Windows Defender.

Restart your computer's operating system. Double-click the "Windows Defender" icon in the system tray at the lower-right end of the screen. Click the question mark icon at the top of the Windows Defender screen and choose "Check for Updates." Select "Continue" if you are running Windows Vista. Wait for the updates to finish installing and click "Scan." Click "Stop Scan" if the problem persists. Click the question mark icon again and select "Exit Windows Defender." Click "Yes" to confirm you want to close the software. Open the "Start" menu screen and select "Control Panel." Select "Uninstall a Program" in Windows 7 or Windows Vista, or instead choose "Add or Remove Programs" in Windows XP. Click the "Windows Defender" entry and select "Uninstall." Choose "Yes" and restart the computer after the program is removed. Navigate to the Windows Defender installation webpage (see Below). http://www.microsoft.com/downloads/details.aspx?FamilyId=435BFCE7-DA2B-4A6A-AFA4-F7F14E605A0D&displaylang=en&mg_id=10134 Click "Download" and double-click the Windows Defender installation file when it downloads to your hard drive. Go through the onscreen installation instructions. Open the "Start" menu and choose "All Programs." Select "Windows Defender." Click "Scan" to start a new scan for malicious software. Hope this helps

b>

Dec 27, 2012 | E-Machines eMachines Desktop PC

2 Answers

I have just installed BOOKKEEPER 2008. An error window keeps coming up Error # 3010 I need to get this fixed as quickly as possible. Thanks, Deb


It looks like a file has been corrupted during the installation process.
Download and install CCleaner from www.ccleaner.com
Uninstall BookKeeper and then use the registry cleaning tool in CCleaner to clean up the registry of your computer.
Re-install BookKeeper and make sure no other programs are running on your computer during the installation.

Jul 25, 2008 | Computers & Internet

3 Answers

I have cd for norton antivirus 2008 need instructions on how to do it


1. Preparing before you begin
    1-1 Make sure that your computer has the necessary system requirements.

    * Windows XP Home Edition/Professional
    * Windows Vista (32 and 64-bit) Home basic, Home Premium, Ultimate, Business, Starter Edition

    * 300 MHz or higher processor
    * 256MB RAM
    * 180MB of available hard disk space

    1-2 Remove any other antivirus programs that you currently have installed.
    To remove them, click Start > Control Panel > Add or Remove programs. In the list of current installed programs, click other antivirus or firewall programs, and then click Remove.

    1-3 Make sure that you can connect to the Internet, then close that window.

    1-4 Close all open programs on your computer.

2. Installing and activating Norton AntiVirus

2-1 Do one of the following:
If you install from a CD, insert the CD into the CD-ROM drive.
If you downloaded your copy of Norton AntiVirus, double-click the file that you downloaded.

2-2 In the opening panel, click Install Norton AntiVirus.

2-3 Read the License Agreement, type your Product Key if prompted, and then click I Agree.
If you do not accept the License Agreement, you cannot continue the installation.

2-4 In the Installation Options panel, review the options, and then click Next.

2-5 In the Pre-Install Scan panel, click Start Scan.
The scan takes a few minutes.

2-6 In the Installation Confirmation panel, click Next.

2-7 In the Activation panel, wait for the progress bar to stop, and then click Next.

2-8 If the Norton Account panel appears, do one of the following:
* If you currently have a Norton account, complete the Sign in to an existing Norton Account section.
* If you want to create a new Norton Account, complete the Create a Norton Account section.

2-9 Click Next.

2-10 In the Norton AntiVirus Installation Complete panel, review your subscription details, and then click Finish.

2-11 In the Welcome to LiveUpdate panel, click Next to begin checking for the latest product updates.

2-12 On the next LiveUpdate panel, review the list of available updates, and then click Next to begin the updates.
This process takes a few minutes.

2-13 On the final LiveUpdate panel, click Finish.
A system scan begins automatically. When the scan is complete, the Norton AntiVirus main window opens.

Apr 20, 2008 | Computers & Internet

1 Answer

I just bought Hallmark Card Studio Deluxe 2009 & I can't install it. I am using Windows Vista Home Premium. I put the CD in & nothing happens. Can you help?


Go to My computer and look for the name of your product attached to one of the drive letters. At this point double click the drive letter with left mouse button. This should start installation.

If that does not work right click and select setup from the list.

Jan 05, 2009 | Computers & Internet

1 Answer

Pinnacle Studio Plus version 10 Keeps Crashing


If you are getting any type of error message or warning message (except a fatal crash message), then , click here to see the FAQ titled "Studio Launch error/warning messages" to resolve these issues. For a fatal crash or any type of lockup/freezing while launching, continue with this FAQ, below.
If Studio was launching for some period of time and then it stopped launching, it is best to try to determine what changes have been made to the computer recently and undo the changes to see if it has an affect on the problem. Here's a short list of what could affect Studio's ability to launch:
  • A Studio patch was applied but it didn't install properly
  • The graphics driver was updated
  • Hardware was installed
We recommend using Windows XP System Restore. You can obtain more information on how System Restore works from the Microsoft web site at:
http://www.microsoft.com/windowsxp/using/helpandsupport/learnmore/systemrestore.mspx
Troubleshooting steps for Studio hangs or crashing while launching (starting)
1. RESTART THE COMPUTER. Try restarting the computer
2. WAIT A FEW MINUTES: If Studio still won't launch, wait a few minutes to let it finish launching. We have noticed on some computers that it may take a little while for Studio to completely launch. Studio 10 users click here to see the FAQ on this.
3. LATEST VERSION OF STUDIO. There was a launch problems in previous versions of Studio 10 that are now fixed in the latest version. When troubleshooting any problem, it is always best to be on the latest version of the software.
If you have Studio version 12, download the latest version here.

If you have Studio version 11, download the latest version here.

If you have Studio version 10, download the latest version here .

Note: Studio 11 patches will only patch a previous install of Studio 11. Studio 10 patches will only patch a previous install of Studio 10. Etc.

If you have an older version of Studio (Studio 9 or 10, etc), it is advised for you to update to the current Studio software. The current version is Studio 12. Click Here to go to the Studio 12 Upgrade page.

How to download and install a patch:
  • When downloading the patch make a note of where it is being saved to. We recommend saving the patch to the desktop.
  • Before installing the patch, make sure that you do not have any other programs running. Studio must not be running.
  • Once it is fully downloaded, double-click on the patch to begin the installation.
  • Follow any on-screen prompts to complete the installation. Reboot the computer after applying the patch.

4. SAFE MODE: Try launching Studio in Safe mode. In Safe mode, many device drivers and applications do not load. If Studio will launch in safe mode, then the issue is most likely a configuration problem with your computer. NOTE: We do not recommend using Studio in Safe Mode. This step is for testing purposes only. To start in Safe mode:
  • Shut down the computer
  • When you turn it back on, tap the F8 key every couple seconds until a menu pops up. (If the XP splash screen appears, the F8 keys was pressed too late so restart the computer and try this step again)
  • On the menu, choose Safe Mode, and then press the Enter key
  • Launch Studio
If you need help starting in Safe mode, you can click here to get information on Microsoft's web site
If Studio won't launch in Safe mode, then Studio many not be installed properly or the install may be corrupt. We recommend uninstalling and reinstalling Studio.

Click here to see the FAQ on how to uninstall, then reinstall Studio 10.

Oct 22, 2008 | Pinnacle Computers & Internet

1 Answer

When I click on the Windows Backup icon to start the backup program nothing happens


You may need to re install it............
Using your Windows CD :
To manually install Backup: 1. Double-click the Ntbackup.msi file in the following location on the Windows XP Home Edition CD-ROM to start a wizard that installs Backup: CD-ROM Drive:\VALUEADD\MSFT\NTBACKUP 2. When the wizard is complete, click Finish.

Jul 14, 2008 | Computers & Internet

1 Answer

How to create and print cards


You have to install a card design software program like Print Studio or Hallmark Card Studio or something similar.

Here's a site where you can do it online

Jul 04, 2008 | Computers & Internet

1 Answer

Today I installed Hallmark Card Studio 2008 Deluxe which consists of 5 disc. I can get the calendar but am unable to get any cards. What do I have to do to get the cards displayed?


I took the Hallmark Card Studio discs back and went to Best Buy and got PrintMaster.The strange thing is that the Hallmark disc with the cards didn't take. It seemed that the 5th disc went in spurts instead of a steady whir. The events calendar is on the computer. In fact both of the icons are on the desktop. OfficeMax asked me to remove the program and start over. This I did with the same results. It just didn't open up. Now the PrintMaster FunHouse etc. came on but the cards won't open up. So I am using an old Hallmark disc with Greetings 2000 and that works good. I don't have any idea why it won't take. Someone suggested that the drive was defective but then why do some take and not others? Any ideas?

Apr 18, 2008 | Computers & Internet

1 Answer

When i try to use hallmark studio, i get the phrase application failed to initialize properly (0x0000135)


Please run windows update. It's important that you install Microsoft .Net framework & other security fixes.
When updating .Net framework there are many, please stay in order (smallest to largest). .Net framework 1.0.
.Net framework 1.1 & so on. When your PC has completed all updates try your program; hallmark studio again. If it still fails, reinstall the program & do not run other programs during install.

If you have more questions feel free to ask.

Good Luck & Kind Regards.

Mar 21, 2008 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

98868 Answers

David Payne
David Payne

Level 3 Expert

14088 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...