Question about Dynex DX-PDVD7 Portable DVD Player

2 Answers

Dynex DVD player keeps saying no disc.

Where do I get a replacement lens and how do I change it.

Posted by on

  • Nokki Feb 12, 2009

    I has been working great for 8 months. One day when we turned it on, it goes on as usual for just about 10 secs then picture stop moving. I turned it off, thought DVD disc might be stuck, then try to turn on again. Since then it keeps saying 'no disc'. What should I do?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Unplug tape - like connection at laser - eye & replug it. Disassemble first. IT WORKED FOR ME !!!!!!!!!

Posted on Jan 09, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

When dvd is inserted dvd player reads wrong disc

Posted on Feb 17, 2009

2 Suggested Answers

caroldon
  • 17129 Answers

SOURCE: My Dynex DVD player keeps

It is for sure that your optical head is faulty , the laser is not detecting the data on the cd to be read and so the processor controller does not get any data to convey the message" no Disk"
Hence even after cleaning there is no result you will need to replace the head with a same type but to do it you will need some help with the new one as some precautions are necessary before the new one is installed. I hope you try cleaning the lens carefully with an ear bud as the final option before the head can be though of. Helpful I hope. Good day

Posted on Aug 17, 2010

  • 2 Answers

SOURCE: My Dynex portable DVD player

Might be miss aligned. Try holding the disc still while it tries to boot up. The laser will shake and vibrate. Let go and try it again to see if it works. If nothing else, you've got nothing to lose.

Posted on Dec 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

It turns on and then i put hte disc in and it says loading and then it says no disc


Try Lens Cleaning Disk with Liquid, easily available in market. if still problem after this method. you have to Replace the Lens with newone. best of luck

Feb 01, 2011 | Insignia IS-PDO40922 Portable DVD Player

1 Answer

Spins CD says loading for about a minute then stops spinning and says no disc.


first of all check for the dirt or dust on the optical unit lens, secondly check for the breakage in the ribbon type connector, which connects the optical pickup unit to the main board, if broken replace it and if still the problem persists then replace the optical pickup unit

Dec 07, 2010 | Dynex DX-PDVD7 Portable DVD Player

1 Answer

My Dynex DVD player keeps saying NO DISC or OPEN when a disc is inserted.


It is for sure that your optical head is faulty , the laser is not detecting the data on the cd to be read and so the processor controller does not get any data to convey the message" no Disk"
Hence even after cleaning there is no result you will need to replace the head with a same type but to do it you will need some help with the new one as some precautions are necessary before the new one is installed. I hope you try cleaning the lens carefully with an ear bud as the final option before the head can be though of. Helpful I hope. Good day

Aug 17, 2010 | Dynex DVD & Blu-Ray Players

1 Answer

Keeps saying "loading" but won't play


hello,

the reason your dvd player keeps saying loading without working is that the laser or lens is weak or dirty.

the solution is for you to
1. use a lens cleaner to clean the lens,
2. replace the lens,

to replace the lens,
1.get a replacement lens,
2. unscrew the player from underneath,
3. carefully move the board that you will see, it is like a panel,
4. gently unscrew and remove the lens, and replace it with the new lens you got for replacement.
5. carefully place the panel or board back,
6. couple it back together,

test with a DVD disc.

please rate my solution.

Goodluck

Jun 27, 2010 | Philips DVD724 DVD Player

1 Answer

My dvd player works but just keeps saying "loading" on the home screen.


hello,

the reason your dvd palyer keeps saying loading without working is that the laser or lens is weak or dirty.

the solution is for youto
1. use a lens cleaner to clean the lens,
2. replace the lens,

to replace the lens,
1.get a replacement lens,
2. unscrew the player from underneath,
3. carefully move the board that you will see, it is like a panel,
4. gently unscrew and remove the lens, and replace it with the new lens you got for replacement.
5. carefully place the panel or board back,
6. couple it back together,

test with a DVD disc.

take care

Jun 11, 2010 | Audiovox D1708 Portable DVD Player

1 Answer

Dvd player is saying no disc


Hello,

how long have you been using the player. There is every tendency that the lens (laser) of your player is weak and that's why it cannot read or play discs.

The lens (laser) is what makes the player reads discs, and if the lens is weak/dirty, there is no way it can read or play disc.

Get a lens cleaner and use it to clean the lens, if that does not solve the problem, then its means, the lens needs to be changed completely.

Good luck.

Apr 21, 2010 | Dynex DX-PD510

1 Answer

Not loading


manually clean the laser lens with a q-tip , but be gentle when pressing down on it , if you press hard you can ruin the focus adjustment that it has to do
or get a "aser lens cleaning disc"( but if it is to dirty it wont see that either)

the laser lens
bb72552.jpg

Apr 01, 2009 | Dynex DX-PDVD7 Portable DVD Player

1 Answer

Player keeps saying no disc why?


there r two reasons that the player says no disc on display. 1)the disc which you insert in your player is really not redable.check out that disc in any other player and confirm whether its working or showing the same fault in other player too. 2)the disc may be perfectly all right, but the lens in the player which reads the disc is either got dusty or the lens is turned faulty. for dussty lens you can clean it with tissue paper and check out .but for the faulty lens its necessary to replace the lens.thats a costly issue.

Feb 02, 2009 | Sansui VRDVD4005 DVD Player/VCR

2 Answers

My Dynex portable DVD player keeps saying no disc, I have tried several discs. I saw your answer to this problem is to replace the lens, where do I get a new lens and how do I change it?


hi last week i have a dynex like you and a sell it 20$ new so don't change your lens the lens price is 32$ and 45$ for change it.

but you can tried something you can clean you lens whit cotton swabs and alcohol and do not uses peroxide.

bye and good lock

Nov 30, 2008 | Dynex DX-PDVD7 Portable DVD Player

1 Answer

Yamada dvd slim5520 dvd player keeps saying NO DISC.I manually cleaned the laser.But still says NO DISC & when a disc is in the machine there is no movement of the disc at all.


hello Pauldarkomen,
your DVD player might have the following problems,

the lens may be damaged, or
the lens is connected to a strip which supplies power and information to the lens which may be lost.
check for both of them and change your laser lens .

Sep 24, 2008 | DVD & Blu-Ray Players

Not finding what you are looking for?
Dynex DX-PDVD7 Portable DVD Player Logo

Related Topics:

1,904 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dynex DVD & Blu-Ray Players Experts

Cindy Wells

Level 3 Expert

4758 Answers

Ottoniel

Level 2 Expert

197 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Dynex DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...