Question about HP PSC 1315 All-in-One Printer

1 Answer

MY HP PSC 1315 ALL IN ONE PRINTER

MY PRINTER DOES NOT PRINT FROM COMPUTER TO PRINTER.. I THINK I MAY HAVE UMPLUGED SOME WIRES IN THE BACK OF THE COMPUTER AND CONNECTED THEM WRONG. BUT IF THERE NOT CONNECTED WRONG IT STILL DOESNT PRINT DOCUMENTS FROM THE COMPUTER... IT JUST STOPPED WORKING OUT OF NOWHERE.. THEN I MESSED WITH THE WIRES AND NOW ITS A BIG MESS...

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

First try and print a test page from the printer .... if its an Hp printer the following link should help http://h10025.www1.hp.com/ewfrf/wc/gener... make sure that the printer test page prints fine. Now if the printer is connected through a USB cable, try and disconnect the cable from both ends ( from the back of the computer and from the back of the printer ) plug it back in. you might get a Found new Hardware popup at the right hand side bottom cornner, if you do then wait for 2 or 3 minutes. It might ask you to inser the installtion cd, so please do so. That should work for you. Try a different usb port from the back of your computer. If it still doesn't work, go to the printers and faxes folder under the control panel and still the printer icon is showing offline, right click on the printer icon click on cancel all documents and then again right click on the printer icon and delete the printer icon. insert the printer installtion cd and it will automatically install all the printer drivers automatically. I got this resolution from *** , those people are excellent.

Posted on Jan 24, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No problem iwant install hp psc 1315 all-in-one printer-scanner-copier


Hi There,

Please follow the below link to install the HP PSC 1315 All-in-One Print/Scan/Copier on to your computer.

Link:
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?lc=en&dlc=en&cc=us&product=374568&lang=en&

Please download the user Guide which reads " HP PSC 1310 series all-in-one - (English) User Guide "on the page.

Enjoy your installation and enjoy printing......

Thanks
Please vote for me if you think your issue is resolved....

Oct 28, 2010 | HP PSC 1315 All-in-One Printer

2 Answers

Takes nearly an hour to print a page after the document has been sent for printing from the pc


that is a firmware issue.

but before you flash it ..
try to unplug and plug the printer,,,and then restart your computer..

you need to flash or load another printer firmware to the printer.
I think your printer firmware is available at your product service center.


firmware is the brain of the printer that make the printer print .

thanks for using FIXYA.

mel

May 25, 2009 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

I have deleted my hp psc 1315 printer, my Compaq


go to hp's website and download the software for your printer it's really easy and doesn't cost anything.

If you need further help, reach me via phone at https://www.6ya.com/expert/mark_445a24324be9eb03

Mar 01, 2009 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

HP PSC 1315 can't scan and print


try to uninstall & reinstall the printer application software... also follow instructions while reinstalling the software.. keep the priner cable disconnected till the time the installation software dosen't ask you to connect the printer....

Jan 18, 2009 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

It automatically print a page everytime I start my hp psc 1315


Hi Siddarth

In HP PSC 1315 printer after replacing new Ink Cartridges the printer always prints Alignment test page every time you turn it ON.To resolve this problem you must complete the alignment process.

Steps

1.Turn the printer ON.
2.Once its ON, it will print the Alignment page. Place the page in the scanner bed correctly.
3.Then Press START SCAN button.
4.The power light will start blinking, wait until the power lights turns solid.
5.Now Alignment process is over.Discard the paper from scanner.
6.Turn the printer OFF and then ON, it will not print that page again.

Note:Please follow this steps every time when you replace the Cartridges.

Thanks
Rizwan
rizwan84tx@gmail.com

Dec 08, 2008 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

Hp psc 1315 paper jam


my printer no function cant print

Jun 17, 2008 | HP PSC 1315 All-In-One InkJet Printer

7 Answers

HP PSC 1315 all-in-one printer/scanner/copier


how can i get a free driver of HP PSC 1315 all-in-one ? my CD Driver is damage

Mar 03, 2008 | HP PSC 1315 All-in-One Printer

2 Answers

MY PRINTER WILL NOT PRINT MY WORK


allo i have the same model HP psc 1315 all in one and i can t find the drivers for my mac os . Can u help me, thank u Cat

Jan 27, 2008 | HP PSC 1315 All-In-One InkJet Printer

Not finding what you are looking for?
HP PSC 1315 All-in-One Printer Logo

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2022 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Cindy Wells

Level 3 Expert

5679 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...