Question about Wanlida Group LTD-1510 15 in. TV/DVD Combo

2 Answers

Remote control not working and need programming code for cable television/universal remote control

My remote control is trashed so i tried to program my comcast remote. none of the 200 numbers listed worked so i tried to program several universal remote controls with no luck. Is there a code for programming this model and where can i buy a replacement remote control for this tv/dvd? (none listed on e-bay)

Posted by on

  • 9 more comments 
  • DET626 Nov 13, 2007

    Same as the previous message with NO luck. The remote that came with the TV/DVD from Wanlida lasted about 6 months.....

  • el duche Nov 19, 2007

    my remote control is also broken. I have had the tv/dvd player for a couple years and the remote started only working if I applied pressure on the location on the remote that the battery is housed. I replaced the battery and the problem was fixed for a couple days...until the remote seemed to lose power again. I fiddled with the metal clip in the remote that holds the battery to no avail. Where can I get a replacement remote control for my LTD-1510 Wanlida TV/DVD combo??????

  • globug52 Jan 19, 2008

    have a wanlida ltd 1510 I have replaced the batteries in the remote control it does not work. is there a remote control i can purchase? I need a code for a universal remote I purchased.

  • pdiggs Feb 24, 2008

    need remote control-cannot find one to work-no code

  • Anonymous Feb 25, 2008

    I went to remotes.com as suggested and the only solution offered was to contact the manufacturer - THAT is not the solution.

  • jali084 Jun 20, 2008

    my remote control works fine BUT i want to program it with the universal code my local cable company provided and I can't seem to find the code ANYONE know that code or where I can get it?

  • Anonymous Oct 03, 2008

    I have wanlida ltd1510 15in lcd/dvd combo, i need code to program universal comcast cable remote. does anyone have the code?

  • joaocardoso Feb 28, 2009

    remote control not working and need programming code for cable television/universal remote control

  • Anonymous Mar 15, 2014

    need sylvania codes to program universal remote

  • Anonymous Mar 22, 2014

    How to get my Sharp LCD tv code programmed on the LG BD530 blue ray player remote

  • Anonymous Mar 22, 2014

    lost remote control bought new universal one but cant get it to work

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

You can get one at

http://remotes.com/


LTD1510
MALATA

Posted on Dec 13, 2007

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Remotes.com says oerseas item-not available?

Posted on Feb 24, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

One for all universal remote I need the code to program my seiki tv


here you go


Product Support For One for All Remotes.

Q: I'm trying to set up my cable/satellite/universal remote to work with your television. What is the manufacturer's code for my SEIKI TV?
A: Cable and Satellite content providers control the remote codes, and we apologize for any confusion during the remote programming. Please try the following codes:
DIRECTV - 10178 11687, 10178, 10835, 10056, 10150, 10463, 10156, 11498, 11401, 0178,
Time Warner Cable - 0178
Philips - 0002
Comcast - 11864, 10178, 0060
Cox Communications - 0178
Atlas DVR Device URC - 0178
Bell Remotes & Dish Network - 505, 506, 516, 523, 526, 566, 573, 612, 627, 647, 652, 653, 654, 655, 656, 658, 659, 664, 665, 667, 669, 670, 679, 680, 704, 717, 730, 738
ATT U-verse - 1004
Hitachi - 0002
URC- 2964, 0145
Cablevision customer (optimum)- 004
Bose or universal remotes- LG remote code
Universal Remote - One For All OARC04G 4 Device Universal Remote (Element code)
These codes may not work on some universal remotes. If there is another code listed for SEIKI Digital in your universal remote control guide, please try that code. Refer to the Remote Control Guide under your TV's model number for more information.

Jan 09, 2017 | One For All Televison & Video

1 Answer

How do you program it to a GE universal remote


these are the codes
LG: 004 005 009 012 050 057 080 156 227 338

  • How to Program a GE Universal Remote ' Techwalla https://techwalla.com/content/program-ge-universal-remote Lost your Remote? Need help programming your GE Universal Remote? Most TV's, VCR's, DVD Player's, Cable and Satellite Boxes will work with a GE universal...
  • How to Program GE Universal Remote: Quick Steps www.brighthub.com > Electronics > Home Theater > Home Media 2011-04-18 · How to Program GE Universal Remote Using the Code Search Function. If you've tried the codes listed for your device brand and are unable to get your ...
  • GE Universal Remote Codes and Instructions ' direcTutor www.directutor.com/content/ge-universal-remote-instructions Goto GE remote Codes. Direct Code Entry for GE remotes with 4 digit codes. 1. Manually turn on the device (TV, VCR, DVD, etc.) you wish to program.
  • How to Program a GE TV Remote ' Techwalla https://techwalla.com/content/program-ge-tv-remote GE universal remote controls allow users to program multiple devices onto a single remote. The remote control uses codes to detect the device, and you can...
  • GE Universal Remote Quick Start Guide - YouTube Youtube
    • BY JASCOPRODUCTSCOMPANY
    • 3 MIN
    • 216K VIEWS
    2013-04-18 · Video embedded · http://www.jascoproducts.com Eliminate remote clutter with GE Universal Remotes
  • How to Program a GE Universal Remote Control ' eHow www.ehow.com > Tech > TVs > Remote Controls
    • BY EHOW ELECTRONICS EDITOR
    Programming a Jasco/GE Universal Remote Control takes about seven steps. As with programming other remotes, you need to know the code of the component you are ...

  • May 09, 2016 | LG "32"" inch New 2011 HD LCD TV With HD...

    1 Answer

    My wave cable hd dta remote will not turn offandontv...repair guy said to ask vizio


    Use the following instructions and code list to program your VIZIO Universal Remote Control. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit. Find the programming code for your TV (or device) in the code list and enter it using the Number Buttons.
    try a universal remote and program it, from the manual.
    3 Digit Universal Remote Codes For TV Codes For Universal Remotes
    4 digit GE universal remote control codes with code entering instructions
    http://www.remotecodelist.com/

    http://cdn.vizio.com/documents/downloads/vizio-universal-remote-codes.pdf

    Feb 03, 2016 | Vizio P50HDTV10A 50 in. Plasma HDTV

    3 Answers

    I have two RCA remotes. 1st RCU 310 5538P. 2nd RCU 400 2420BB.


    Remote Control Support - RCA ' Made for Moments

    www.rca.com/support-remotes

    RCARemote Control Support. Select your Type of Remote. Remote Code Finder ...RemoteProgramming. Cable/Satellite Receiver Codes. Select Your Provider.

    RCA Universal Remote Control- Target Programming ...

    www.thompsontv.com/rcarc.html
    RCA Universal Remote Control-Programming Codes. ... Universal Remote. The remotemay already be set up to operate your brand of TV, VCR, or Cable Box.

    Program an RCA Universal Remote Without a "Code Search ...

    www.wikihow.com > ... > TV and Home Audio > Television

    wikiHowHow to Program an RCA Universal Remote Without a "Code Search" Button. Do you have an older RCA universal remote that you want to use, but it lacks a ...

    Jan 23, 2016 | RCA Televison & Video

    2 Answers

    Need sansui 076k0ut011 led tv remote codes to program an rca tv


    reset sansui tv remote control 076k0ut011 Questions ... - Fixya

    www.fixya.com > Forum > Tags
    ...your help in advance. need code for a one for all URC-2060B06 sansui tv try these ... ...sansui tv with a RCA 704 remote control I have sansui tv and a RCA 704 remote ... URC-3021 Remote Control: How do i program this remote to a sansui tv? ... TV Remote Controls Sansui Remote eBay NEW Orion Sansui JVC LED TV ...

    reset sansui tv remote control 076k0ut011 Flat Panel ... - Fixya

    www.fixya.com > ... > Tags > reset sansui tv remote control 076k0ut011
    Flat Panel Televisions reset sansui tv remote control 076k0ut011 questions and answers. ... ...sansui tv to program rca remote to it model # HDLCD1955C need tv code for this model ... Question about Contex 39-inch 1080p LED TV LE39D3.

    Original Sansui - Orion TV Remote Control 076K0UT011 ...

    ? 1:00
    https://www.youtube.com/watch?v=mPbRsUI0xnk
    Dec 21, 2012 - Uploaded by ElectronicAdventure
    Original Sansui - Orion TV Remote Control 076K0UT011 - Save $5 with ... have the New Original Remote ...

    [PDF]Operating Instructions For 4-Function Cable



    Dec 16, 2015 | RCA Televison & Video

    2 Answers

    Is there a DirectTV remote control code for an Ario TV?


    i have an ARIO TV 32" and I used common code 10019-10178-10030-10835 to program my direct tv remote. anything is working , but only channel is not woking ,please can they help me out , how i program channel

    Nov 21, 2011 | Televison & Video

    1 Answer

    Directv remote will not program to rca L42FHD37R. What is the code? I have tried all of the codes given by Directv.


    "This TV utilizes new remote control signal codes and may not be compatible with your existing universal remote (e.g. satellite box remotes, cable box remotes, generic universal remotes, etc.). Over time, newer universal remote controls that become available should pick up the new TV codes."

    Dec 07, 2009 | RCA L42FHD37 42 in. LCD HDTV

    2 Answers

    Need code for remote. New remote needs replacing.


    Cable and Satellite content providers control the remote codes,
    and we apologize for any confusion during the remote programming.
    Please try the following codes 10019, 0178, 10178, 0030, 10030,
    0835, 10835, or for Dish Network try 627, 659 or 505. For Fios
    TV (Verizon), try the code 3264. These codes may not work on some
    universal remotes. If there is another code listed for Element
    Electronics in your universal remote control guide, please try that
    code. Refer to the Remote Control Guide under your TV’s model
    number for more information.

    May 09, 2009 | Element ELC-HS321 32 in. LCD TV

    6 Answers

    NEED HELP PROGRAMING UNIVERSAL REMOTE CONTROL


    rca d770 universal remote how do i program

    Sep 03, 2008 | RCA Universal Remote Control

    Not finding what you are looking for?
    Wanlida Group LTD-1510 15 in. TV/DVD Combo Logo

    1,687 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Wanlida Group Televison & Video Experts

    The Knight
    The Knight

    Level 3 Expert

    75774 Answers

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17130 Answers

    Marvin
    Marvin

    Level 3 Expert

    81400 Answers

    Are you a Wanlida Group Televison and Video Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...