Question about Frigidaire GLTF2940ES Front Load Washer

3 Answers

Small rug washing in front end loader washer

When I wash bathroom rugs in my frontload Frigidaire washer, they always come out wet, not damp dry, but wet. How do I fix this: Thanks.

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Contributor
  • 1 Answer

A rug in bathing room provides comfort during the chillier periods.
Tips to use a rug in the bathroom
If you want to enhance your bathrooms area with a fashionable rug, think about the following tips:
1. Use a cushioning under the rug or a rubberized non-slip support. This is very important, as it defends the rug from unwanted wetness and keeps you from falling.Wool carpets are known as normally dirt proof and effective at rejecting h2o, but sinking can create wetness. Wool carpets require a fast dry, so if you choose a made of wool rug do your best to get rid of any unwanted wetness on the rug by compressing it out and dehydrating it in the sun.
2. Place the rug far away from the tub or shower to secure if from wetness. Ensure that you have a good air flow in the bathroom: keep of the question open to clear out the vapor after a hot shower. Shower drapes are excellent too!
3. Spend money on a top-notch rug. You want to look for strength, as the rug will be frequently walked on.
Quality Handmade Felt Balls Felt Ball Rugs from Nepal Felt Ball Rugs

Posted on Aug 26, 2016

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Every defense of front load washers comes with steps the user needs to perform in order for it to work properly and remain odor free. Does anyone besides me see a problem with this? High efficiency? Seems to be the opposite to me. I sorely miss the top load mechanical function set from the 80's I sold when I moved. I owned them 30 years. I felt the need to clean it maybe a dozen times and repaired it once which cost under $50 and it was a problem I caused by washing something I didn't realize was un-washable.

Posted on Feb 13, 2016

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Frigidaire Master
  • 2,651 Answers

Its problably not able to balenbace the load of rugs, if the machine cant balance itwont go to high speed spin. in actuallity your probalby better off bringing the rugs to the laundry mats, especially if the are rubber backed, the rubber backing will come off clogging your pump assy, then your looking at replacing hte pump for a few hundred dollars, for a clean set of $30 bath rugs.

Posted on Nov 30, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On a Maytag Maxima XL front load washer, please tell me on what cycle to wash a bathroom rug. zo vs


the heaviest cycle there is . but it sounds like the control board is not advancing the timer if it sits that long on one thing perhaps a call to a repairman is called for .

Jun 22, 2015 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

After washing bathroom rugs, my Frigidaire Affinity front loading washer would not drain the water out or refill with water


Often washing things like rugs and matts can cause real problems for the drain pipes on you machine. Have you tried clearing out the drain plug, located at the bottom of the front of the machine? If that doesn't work, the whole drain hose from the drum will be blocked.
thanks
www.recycledrum.com

Jan 12, 2013 | Frigidaire Affinity ATF7000E Front Load...

2 Answers

Maytag epic z-ripped piece of door seal


I would say that the rubber may have gone into the system, and is probably clogging up the water outlet hose, and or the Pump. This is a bit of a "Fix' it will require the taking off of the motor and Hoses, connected to see where that bit of rubber is.http://www.letsfixit.co.uk/html/washing_machine_faq.html
http://www.appliancerepair.net/apnet/frameset?http://www.appliancerepair.net/apnet/washer/toc.htm
If you do not choose to repair this yourself, using those links above. Then please get a "Quote" for repair.

Mar 24, 2010 | Maytag EPICz 3.7 cu. ft. Washer

3 Answers

Washer won't spin. Washed bath mats (small) and


Read a post from someone else on this - turned out it works fine, just wouldn't work with the small wet load. I added towels to the bath mat load, washed them, it spins fine. Washed clothes & that worked fine too. Yay!! Not broken. Just not found of small loads of bath mats!

Jan 22, 2010 | Frigidaire ATF6000ES Front Load Washer

1 Answer

WASHED RUG IN MY NEPTUNE WASHER. rUG CAME APART. washer won't drain all the way. ND COMES UP.RUG WAS SHAG TYPE.hELP!


You will have to clean up drain system in washer. Get the rug pars out. A wet vac is a useful tool here.

May 05, 2009 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

PAV2300AWW


pump is likely not clean yet
there is a chance that the pump impeller is loaded with lint, inside the pump body
not sure about front loader dissassembly,
usuallly front panel removes and the pump is accessible on the front side of the motor retained by two spring clips.
if you clear the muck quickly the lint wont damage the impeller

Nov 05, 2008 | Maytag EPIC MFW9700S Front Load Washer

1 Answer

My washing machine wont empty or spin it was working the other day and i put a small rug in it that went heavy when it was wet and it stopped working it is a centrex 7 kilo


You drain pump may be full of the rug stuff you will need to open the washer and the remove drain hose to remove what is stuck in the pump.... I have used a shop wet/dry vaccum put on the drain hose to remove stuff... but it will not always work...

good luck

Sep 12, 2008 | Washing Machines

1 Answer

Not going into high spin with any weight in it


I have had the same problem with my front loader. The rug is too heavy and the drum isn't balanced. Try adding more items to the wash and it will spin.

Jan 23, 2008 | Frigidaire FWTBB30DS Front Load Washer

1 Answer

WILL NOT SPIN ON HIGH


The spin normally does not work when the outlet filter is clogged; if the filter is clean you should then check your pipe coming out from under the tub (plug off the wall first before doing all these things). Last check your outlet pump, could be blocked with something. Refit carefully, you might need a nice pair of pliers to get the grip clip on and off the pipes.
The outlet pipe into the wall stands at a particular height, refit exactly to this height, about 3 feet from ground

Nov 01, 2007 | Whirlpool Duet GHW9150P Front Load Washer

Not finding what you are looking for?
Frigidaire GLTF2940ES Front Load Washer Logo

825 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

prem mathew

Level 3 Expert

662 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...