I am in desperate need of a copy of a service manual for a IC471A/E. No one has any here, Icom USA told me they are not interested, Icom South Africa don't fix ham gear. I have a retierd avionics engineer friend that can help. WITH THE MAGIC SERVICE MANUAL. Can u help?? Please! happy Holidays ZS6Y South Africa
SOURCE: Service manual or a Service Engineer for Xerox DC12 machine
in every city xerox service center is ther... better u contect local xerox service provide.. becoz they only providing goood and quality service.. and may i know ur place?
SOURCE: Audi A4 1998 DIY service steps/manual
Go to www.audidiy.com or www.audiworld.com (look in their Tech area), and there are full procedures on how to do it (it's the timing belt service). It's not a difficult job really, but you may need to get some specialty tools such as Torx bits to do the job.
Make sure that you get G12 coolant from VW/Audi (the pink kind) and if you have some other color in there now, flush it fully before adding the G12. You can order everything you need, including coolant, from www.ecstuning.com (I've used them many times with full satisfaction). Don't waste your money on the advertised cam locking tool - it's very expensive and wholly unnecessary. Its intent is to keep the cams from spinning, but if you position the #3 cylinder (rear passenger side) to top-dead-center on its compression stroke, the cams would have to be hit with a hammer to turn them.
The job is not difficult really. I've done many timing belts on many cars before, so I know what I'm doing overall, but the first time I did an Audi 2.8L V6, it took me a total of 5.5 hours start to finish. Many other cars (like my 300ZX) take that long just to reach the timing belt. As for how these kinds of jobs go, this is a very easy one.
Buzz me back on here or in email at [email protected] if you have any questions you'd like answered related to this or the rest of your car and I'll do what I can to help you out.
SOURCE: Service manaul
Try this site I came across
http://sites.google.com/site/motorcyclemanualstore/
SOURCE: I am trying to setup my wap settings for internet
Basically what you need are IP address - ask MTN. Proxy Port setting enabled/disabled. Ask MTN. Proxy Port number. Ask MTN. APN. Ask MTN. All these are service provider specific and hence I have asked you to ask MTN. Other settings can be anything. Also you have to get GPRS activated on your mobile number. Ask MTN again. When you have all this inf, then set it up and happy surfing.
SOURCE: Hi, I desperately need a
Try this link. Manual is for a Toro mower with a Suzuki engine. http://www.scribd.com/doc/38652193/Toro-2-Cycle-Engine-User-Guide
163 views
Usually answered in minutes!
×