Question about Kitchen Ranges

1 Answer

Gas oven makes a fluttering sound when pre-heating and cooking

I have an "advanced cooking system" Maytag gas stove "super capicity plus" . I have been having a recurrent problem since it was new. The oven makes a fluttering sound during the pre-heat, and regular cooking cycle. At times it takes longer than usual to heat up, and occasionaly it makes a poofing sound as if to much gas has accumulated before ignition, as well as a slight gas odour while the oven is operating. In my search of the internet i have heard many explanations, from the oven igniter,thermostat, to faulty gas valves.
Could you please help?

Posted by on

  • Robert Scrip Oct 29, 2013

    did the Igniter fix this problem ? My oven is doing exactly the same thing.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

This is most often due to the ignitor bar aging. With time it draws less current and does not hold the regulator valve open all the way. You can confirm that the regulator is OK if the broiler works. Replacement for nearly all of these ovens is a universal part, about $35 at appliance parts stores, takes 5-15 minutes to change (depending on whether you need to pull the oven out to get to the connector).

Posted on Nov 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The burners on my Maytag electric stove work intermittently. Advanced cooking system Super capacity model.


If intermittenly you mean they quit glowing at times is how mine work also and wife does not say they don't cook alright but they do turn off and on as heat requirement changes

Jan 11, 2015 | Maytag Gemini 30" Self-Cleaning...

1 Answer

How do I get rid of stains from the surface of my Maytag Gas Range top(Advanced cooking system Super capacity plus) I always ensure that all spills are promptly cleaned off the enamel stove top, but the...


Use DeBruce Polish, we use it on all of our stainless steel AND ceramic cook tops- we also use Debruce Polish on all of our windows. We used Debruce to remove permanant marker from an enameled surface. This stuff is great! We find them at debrucepolish.com. Debruce is non-toxic and odorless- you will love it.

Oct 20, 2009 | Maytag Kitchen Ranges

1 Answer

GE gas stove


sounds like a bad bake ignitor(uneven heat,long cook times, long preheat times, perhaps even gas smell while cooking)as far as the heat from under the clock assy thats the normal vent( nedds to release heat somewhere, not a problem

Oct 06, 2008 | GE Profile Spectra JGBP90 Gas Kitchen...

2 Answers

Maytag advanced cooking system oven does not preheat to correct temperature and fails to reach the correct temperature


Once you put the desired temperature, select a cook time and it should solve the heating issue. Atleast that what worked on mine.

Jul 25, 2008 | Kitchen Ranges

2 Answers

Frigidaire Electric Range model FEF366EC - Oven disabled


You probably have a short that is causing the stove not to heat up or you not to be able to control temperature settings. The stoves are made only to last as long as the warranty, and when it expires, the stove all of a sudden wants to break down. You might have to get a whole new stove.

Jul 14, 2008 | Frigidaire FEF366EC 30" Freestanding...

2 Answers

MayTag Stove Model MES5770AAW


Here are the codes for Maytag Ranges:

MAYTAG
Type "C" and "D" Clocks Range/Stove/Oven Fault Codes Failure
Code
Condition Check/Repair F1 Supervisory relay enable shorted (non-cook mode); sounds alarm and inhibits cook mode if alarm fault monitor is always active in non-cook mode, and requires removal of power until serviced. Usually a bad touch pad or clock assembly (also called the ERC). Replace touchpad or ERC F2 Bake/broil/clean temp runaway alarm; sounds alarm and resets control to non-cook mode when bake/broil/clean temp exceeds programmed limits. Usually means a stuck relay. Electric @ 525F (bake), 640F(broil), 900F(clean)

Gas @ 525F (bake), 640F(broil), 900F(clean) F3 Open temp oven temperature sensor; sounds alarm and inhibits cook mode Replace oven temperature sensor F4 Shorted temp oven temperature sensor; sounds alarm and inhibits cook mode Replace oven temperature sensor F5 Supervisory relay enable open (cook mode); sounds alarm and resets the control to non-cook mode Replace electronic range control (ERC) F5 Missing a/c line cycle detector; displays code (no audible) Unplug appliance for two minutes, should clear problem F7 Function key shorted; too hot at the clock assembly (also called the ERC) or shorted touch pad or clock assembly (also called the ERC) Replace touchpad or ERC F8 Analog/Digital supervisory; sounds alarm to non-cook mode Replace ERC F9 Door latch supervisory (door latched) Unlock door and check switches or clock assembly (also called the ERC) F0 Cancel key supervision Requires the removal of power until serviced. See qualified technician

Dec 04, 2007 | Magic Chef CGS3760 Gas Kitchen Range

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

936 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Electrolux
Electrolux

Level 3 Expert

4342 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...