Question about Lexmark X2500 All-In-One Printer

1 Answer

My Lexmark 2500 all in one will scan but always just shoots the paper out and wont print. Today it did print just one picture that I scanned but thats was all. The on off button keeps flashing. I must unplug it and reconnect it to get that to stop. I am very frustrated as this just keeps me from enjoying copying and printing things.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 174 Answers

Disconnect the power and usb cable from the back of the printer and press and hold down the power button for 30 sec and then reconnect the cables and try again...open the backdoor and try to move the rollers in upward direction.Make sure the unit is connected directly to the walljack.

Posted on Nov 30, 2008

  • debroy
    debroy Nov 30, 2008

    disconnect the power and usb cable from the back of the printer and press and hold down the power button for 30 sec and then reconnect the cables and try again...open the backdoor and try to move the rollers in upward direction.Make sure the unit is connected directly to the walljack.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to no how to scan a picture on my Lexmark 2500 printer


Hi there!

Folow this link and you will fins the users manual and getting started manual for your Lexmark 2500

http://www.lexmark.com/publications/pdfs/2007/2500/en.html

<good luck 2 u

Nic

Aug 11, 2009 | Lexmark X2500 All-In-One InkJet Printer

1 Answer

2500 Lexmark won't scna


print an alignment page and scan that page.

it would work.

Jun 24, 2009 | Lexmark All-in-One Printer with PictBridge

1 Answer

I have a lexmark 2500 series and it came with an imaging soultions disk,which i never installed and im trying to scan some old pics from my printer to my pc how do i do this? i hit the scan buttin and...


Install the Lexmark Software from the disk. For Lexmark, this has always been a requirement in order to get all of the necessary drivers, functions, and printer communication from a PC to the Printer. Here is the Link for the Driver and Software install if you don't have the CD:
http://downloads.lexmark.com/perl/downloads/downloads.cgi

Depending on the Operating System you are using (Vista may still have another issue that I can walk ya through if it doesn't print) Vista may have a slight prob with printing, XP shouldn't. Let me know.

I sent a copy of this to your E-Mail as requested.

Jun 10, 2009 | Lexmark X2500 All-In-One Printer

1 Answer

Lexmarkx125 will scan larger pictures but smaller ones.


Here are some instructions from the Lexmark X63 which was similar to the X125.

The Lexmark X63 uses a sheet fed scanner, intended to scan 8 1/2 x11 inch paper.
  • To scan a document between 5 1/2 inches and 8 3/4 inches wide, center the document between the paper feed guides leading into the scanner and make sure the document is held straight,. Do not bend the document as it is fed into the scanner.
  • To scan photos or pictures that are 5 1/2 inches wide or smaller, you will need to use a flatbed scanner, or "mat" the image into a regular letter-size paper and scan the entire page. When the scan process is complete, crop out the picture using the AUTO CROP option in the Scan and Copy Control program or the photo-editing software.

Feb 27, 2009 | Lexmark Pro X125 All-In-One InkJet Printer

1 Answer

Can Scan


Right Click on My Computer/Computer if Vista........ Click on Properties then click on Hardware click on Device Manager...... On that list u will see the Printer Name with an exclamation Mark........ Right Click on that click on update Drivers...... Insert the CD to the drive....... Select Brose My Computer for Driver software..... Click on Browse and then Double Click on Computer go to Lexmark X*****.......... Double click on Drivers and then click on scan and then click ok........ Now click next it will say the hardware is ready to use then u can just click on finish and scan..... Thanku
Good Luck..........

Jan 11, 2009 | Lexmark X2500 All-In-One Printer

2 Answers

Lexmark 2500 Series printer does not work properly.


my printer does not print, but tells me i have prints pending

Sep 13, 2008 | Lexmark X2500 All-In-One Printer

1 Answer

Lexmark X1185 won't scan.


I believe you have to push the scan button in order for it to scan and save. The copy buttons will only print either a black copy or a color copy.

Sep 12, 2007 | Lexmark JetPrinter X1185 All-In-One InkJet

6 Answers

Lexmark 2500 Scanning


my lexmark 2500 scan wont work I get App4r exe problem...

Sep 04, 2007 | Lexmark All-in-One Printer with PictBridge

Not finding what you are looking for?
Lexmark X2500 All-In-One Printer Logo

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...