Question about Navigator Evesham Nav-Cam 7000 GPS Receiver

1 Answer

Evespan is frozen up at the start,whAT can I do

Turn on put card in and it just shows start and that is it,time wrong
other words nothing

Posted by on

  • Anonymous Mar 15, 2009

    Can i get the new software for the 2007 Nav-cam

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

You need to test the SD card to make sure it's reading OK. Next step if it is OK, reformat the card and copy the files from the original cd that came with the unit, on to the SD card and that should fix the problem. If the SD card is defective, just get a new 1 or 2 gig SD card and copy the files on that card. It's ALWAYS helpful to have an extra SD card as a backup. If you don't have the original cd, I have the original as well as the new N30 version software for the Nav-Cam 2007. Joe

Posted on Dec 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Frozen reset


Turn it off & take out the batteries - after 2 min, try putting the batteries back in & switch it back on.....

Jun 29, 2014 | GPS Devices

1 Answer

720 Go is frozen. Press the reset button and nothing still get the same screen with a harddrive in the corner. Put it in the cradle and the computer doesnt see the unit when it is on?? Have tried to let...


To reset your TomTom device, do the following:
  1. Check that the battery is charged properly.
    Charge your device for at least 2 hours before trying to turn it on again. Make sure the charging light on your device is on.
  2. Remove the SD card
    If your device uses an SD card, remove it.
  3. Reset your device.
    Use a straightened paper clip, or something similar, to push the reset button for at least 20 seconds. The reset button is a hole at the base/bottom of the device.
  4. Turn your device on.
    Press the On/off button for at least 5 seconds or more, until the GPS starts up. It may take a minute or two of holding it down.
  5. Insert the SD card
    If your device uses an SD card, insert the SD card.

Sep 02, 2011 | Tomtom GO 700 GPS Receiver

1 Answer

Frozen Screen


Mine does this from time to time. I pull the SD map card, power it off, and hit the reset button while the unit is unplugged. These units are notorious for this. But then again, they're inexpensive. No receipt ... well, you're pretty much stuck with it. No receipt, no return or repair.

Sep 15, 2009 | Nextar X3-02 GPS Receiver

1 Answer

Tomtom One 3rd Edition will show green light but will not turn on


If you have an SD card in then remove it and try to boot it up.

It is possible that the SD card is corrupt or faulty.

If it does not power up with no SD card then it may well need to go in for repair.

Should you get it to boot without the SD card then back it up straight away.

Reformat your card (preferably in a card reader) and then restore to the card . You should then be able to put the card back in

Aug 20, 2009 | GPS Devices

1 Answer

EVESHAM 6200


Use the backup cd you got with it. Make sure there is no SD card inserted and just run setup from the CD

Aug 12, 2008 | Evesham Nav-Cam 7700 GPS Receiver

2 Answers

TomTom frozen


uninstall and then reinstall the app again:

www.tomtom.com/9091

Jun 29, 2008 | Tomtom ONE GPS Receiver

1 Answer

Memory card for tomtom


Hi,

Did you try reformatting the card?

Jun 09, 2008 | Tomtom ONE GPS Receiver

1 Answer

Frozen screen


I have a Solution for this Problem,
i have a Software
Any need this contactme i don't know how to post the file,


Fabian

Apr 25, 2008 | Magellan RoadMate 800 GPS Receiver

1 Answer

TomTom One Europe


What is happening is your map updates are being copied onto your memory card without overwriting the old maps hence you are running out of memory.

In the tomtom home browser you should be able to delete your old map before installing the new one. Make sure you have a back up of the map card before you try this though so you can reinstall if something goes wrong.

Also have you replaced the voice prompts on your tomtom? The voice files take up a lot of memory so if you have put new ones one without removing the old ones you will be wasting memory.

There is one window in TThome that lists eveything installed on yuor card so have a good look at this and see what you can get rid of.

Oct 30, 2007 | Tomtom One Europe v2 GPS Receiver

1 Answer

Tomtom one y need help


That's funny I just had the same problem and almost went crazy. Reconnect the GPS to your computer, restart your TomTom home software, and reinstall Tom Tom home to your GPS. If it says this application already exists, then press ok to overwrite it. Something must have happened when u were writing to the SD card the first time that's why u have a frozen SD card and it is telling u to take it out. I just fixed mine this way.

Apr 05, 2007 | Tomtom ONE GPS Receiver

Not finding what you are looking for?
Navigator Evesham Nav-Cam 7000 GPS Receiver Logo

Related Topics:

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Navigator GPS Devices Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

k24674

Level 3 Expert

7987 Answers

The Knight
The Knight

Level 3 Expert

68301 Answers

Are you a Navigator GPS Device Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...